Produktbeschreibung
1) Small volume
2) Big transmission torque
3) High efficiency
4) Low consumption
Parameters :
| Type | Spec | Eingangsleistung (kw) | N( enter) | N(output) | Ausgangsdrehmoment | Permitted axial thrust of output shaft(KN) | Screw Diameter | Length-diameter ratio |
| (N@m) | ||||||||
| ZLYJ | 112-8 | 5.5 | 800 | 100 | 525 | 35 | Ø35 | 25:01:00 |
| 133-8 | 8 | 800 | 100 | 764 | 39 | Ø50 | 25:01:00 | |
| 146-10 | 11 | 1000 | 100 | 1050 | 54 | Ø55 | 25:01:00 | |
| 173-10 | 18.5 | 900 | 90 | 1962 | 110 | Ø65 | 25:01:00 | |
| 200-12.5 | 30 | 1000 | 80 | 3581 | 155 | Ø75 | 25:01:00 | |
| 225-12.5 | 45 | 1000 | 80 | 5371 | 180 | Ø90 | 25:01:00 | |
| 250-16 | 55 | 1120 | 70 | 7503 | 192 | Ø105 | 25:01:00 | |
| 280-16 | 75 | 960 | 60 | 7643 | 258 | Ø110 | 25:01:00 | |
| 315-16 | 85 | 960 | 60 | 13528 | 287 | Ø120 | 25:01:00 | |
| 330-16 | 110 | 960 | 60 | 17507 | 360 | Ø135 | 25:01:00 | |
| 375-16 | 132 | 960 | 60 | 21008 | 390 | Ø150 | 25:01:00 | |
| 395-16 | 185 | 960 | 60 | 29442 | 400 | Ø160 | 25:01:00 | |
| 420-16 | 160 | 960 | 60 | 31831 | 430 | Ø160 | 25:01:00 | |
| 420-16 | 220 | 960 | 60 | 31831 | 430 | Ø170 | 25:01:00 | |
| 450-20 | 213 | 1000 | 60 | 40640 | 500 | Ø160/Ø170 | 25:01:00 | |
| 560-17 | 540 | 1000 | 50 | 84034 | 700 | Ø200 | 25:01:00 | |
| 630-10 | 540 | 1000 | 50 | 15712 | 770 | Ø250 | 25:01:00 |
ZLYJ gearbox series are transmission devices, which are specially designed for single-screw extruder with high precision, hard gear surface, accompany with thrust. Adopting the technical specifications stipulated in JB/T9050.1-1999, all CHINAMFG gearboxes are designed accordingly.
Main Features:
1. The material of gear is the high strength alloy steel, it is manufactured by carburizing, quenching (and other heat treatment), gringding process at last. The gear is in high precison ( 6 grade ) and high hardness ( reaches HRC54-62). Besides, it features low noise when operating.
2. It contains high bearing ability thrust, which is performed reliable and can withstand larger axial thrust.
3. All the items are treated by forced lubrication and cooling system except very few small specification products.
4. CHINAMFG series gearbox is adopted by six-side processing box. Its normal installation is horizontal, but can also be changed to vertical installation according to customer’s requirment.
5. Efficiency transmission, low noise, long operaton time.
Package
Packing for screw and barrel
1) Wooden case package
2) Plastic film package
3) Suitable to transportation
Why choose us?
A> long time experience and history
B> long time nitriding treatment and heating treatment by itself
C>advanced Fanuk series CNC computer-controlled milling machines
D>depth hole drilling machine in 8meters length, which ensure the straigtnss of barrel inside.
E> CAD drawing confirmation before start making
F> Prompt after sale service
G>Land owner and registration capital 25, 000, 000RMB
About us:
ZHangZhoug pinbo plastic machinery co.,ltd is located in HangZhou HangZhou city with brand of PYM(Former HangZhou yumin machine screw co.ltd since 1988). The company is specialized in making screw barrel, gearbox zlyj series, t die, filter and extruder machine. It has become one of the largest supplier of main parts in HangZhou city which
is the basement of plastic machines.
If there is any problem, you can contact with us at any time, we will reply you as soon as possible! /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Anwendung: | Machinery, Reducer |
|---|---|
| Funktion: | Speed Reduction |
| Layout: | Three-Ring |
| Härte: | Gehärtete Zahnoberfläche |
| Installation: | Torque Arm Type |
| Schritt: | Stepless |
| Anpassung: | Verfügbar | Kundenspezifische Anfrage |
|---|
Kann ein Schneckengetriebe für Hochgeschwindigkeitsanwendungen eingesetzt werden?
Worm gearboxes are generally not recommended for high-speed applications due to their inherent design characteristics. Here’s why:
- Effizienz: Schneckengetriebe weisen im Vergleich zu anderen Getriebetypen tendenziell einen geringeren Wirkungsgrad auf, was bedeutet, dass sie bei hohen Drehzahlen mehr Wärme erzeugen und höhere Energieverluste erleiden können.
- Wärmeerzeugung: The sliding contact between the worm and worm wheel in a worm gearbox can lead to significant friction and heat generation, especially at high speeds. This heat can cause thermal expansion, affecting the gearbox’s performance and longevity.
- Verschleiß und Geräuschentwicklung: Hohe Drehzahlen können Verschleiß und Geräuschentwicklung in Schneckengetrieben verstärken. Erhöhte Reibung und Verschleiß führen zu schnellerem Verschleiß der Bauteile, was die Lebensdauer verkürzt und den Wartungsaufwand erhöht.
- Gegenreaktion: Schneckengetriebe können im Vergleich zu anderen Getriebetypen ein höheres Zahnflankenspiel aufweisen, was sich auf die Präzision und Genauigkeit bei Hochgeschwindigkeitsanwendungen auswirken kann.
Während Schneckengetriebe häufiger bei Anwendungen mit hohem Drehmoment und moderaten Drehzahlen eingesetzt werden, sind sie für Hochgeschwindigkeitsanwendungen möglicherweise nicht die beste Wahl. Wenn ein Betrieb mit hohen Drehzahlen erforderlich ist, eignen sich andere Getriebetypen wie Stirnrad-, Kegelrad- oder Planetengetriebe aufgrund ihres höheren Wirkungsgrades, der geringeren Wärmeentwicklung und des reduzierten Verschleißes bei hohen Drehzahlen oft besser.
How to Calculate the Input and Output Speeds of a Worm Gearbox?
Calculating the input and output speeds of a worm gearbox involves understanding the gear ratio and the principles of gear reduction. Here’s how you can calculate these speeds:
- Eingangsgeschwindigkeit: The input speed (N1) is the speed of the driving gear, which is the worm gear in this case. It is usually provided by the manufacturer or can be measured directly.
- Ausgangsgeschwindigkeit: The output speed (N2) is the speed of the driven gear, which is the worm wheel. To calculate the output speed, use the formula:
N2 = N1 / (Z1 * i)
Where:
N2 = Output speed (rpm)
N1 = Input speed (rpm)
Z1 = Number of teeth on the worm gear
i = Gear ratio (ratio of the number of teeth on the worm gear to the number of threads on the worm)
It’s important to note that worm gearboxes are designed for gear reduction, which means that the output speed is lower than the input speed. Additionally, the efficiency of the gearbox, friction, and other factors can affect the actual output speed. Calculating the input and output speeds is crucial for understanding the performance and capabilities of the worm gearbox in a specific application.
Was ist ein Schneckengetriebe und wie funktioniert es?
Ein Schneckengetriebe, auch Schneckenradgetriebe genannt, ist ein mechanisches Gerät zur Übertragung von Drehbewegung und Drehmoment zwischen nicht parallelen Wellen. Es besteht aus einer Schneckenspindel und einem Schneckenrad, die beide über schrägverzahnte Zähne verfügen. Die Schneckenspindel ähnelt einem Gewindezylinder, während das Schneckenrad ein Zahnrad ist, dessen Zähne mit der Schneckenspindel kämmen.
Das Funktionsprinzip eines Schneckengetriebes beruht auf dem Zusammenspiel von Schneckengewindespindel und Schneckenrad. Bei Drehung der Schneckengewindespindel greifen deren spiralförmige Zähne in die Zähne des Schneckenrads ein. Die Drehbewegung der Schneckengewindespindel wird in eine senkrechte Bewegung umgewandelt, wodurch das Schneckenrad ebenfalls rotiert. Diese senkrechte Bewegung ermöglicht dem Schneckengetriebe ein hohes Untersetzungsverhältnis und macht es somit ideal für Anwendungen, die eine erhebliche Drehzahlreduzierung erfordern.
Eine der Haupteigenschaften von Schneckengetrieben ist ihre Fähigkeit, ein hohes Untersetzungsverhältnis bei kompakter Bauweise zu ermöglichen. Aufgrund der Gleitbewegung der ineinandergreifenden Zähne weisen Schneckengetriebe jedoch im Vergleich zu anderen Getriebetypen eine höhere Reibung und einen geringeren Wirkungsgrad auf. Daher werden sie häufig in Anwendungen eingesetzt, bei denen der Wirkungsgrad nicht im Vordergrund steht, sondern ein hohes Drehmoment und eine hohe Drehzahlreduzierung unerlässlich sind, wie beispielsweise in Förderanlagen, Aufzügen, Kfz-Lenksystemen und bestimmten Industriemaschinen.
editor by CX 2024-03-05