WPAWPSWPXWPO 60100 Ratio worm gear speed reducer

Überblick

Kurzinfo

Herkunftsort:

Zhejiang, China

Markenname:

EPT

Modellnummer:

WPA

Nennleistung:

0,06–15 kW

Getriebeanordnung:

Wurm

Ausgangsdrehmoment:

2.6-1195N.M

Eingangsgeschwindigkeit:

1450 Rpm

Ausgangsgeschwindigkeit:

14-280 U/min

The quality of:

High quality roller chain,

Product Keywords:

boston gear spur gear

Lieferfähigkeit

Lieferfähigkeit:

10000 Piece/Pieces per Month

Verpackung & Lieferung

Verpackungsdetails

The cartons

Hafen

shanghai

Online-Anpassung

Produktbeschreibung

WPA/WPS/WPX/WPO 60/100 Ratio worm gear speed reducer

WP series reducer, the worm is made of 45# high quality steel after heat treatment, the worm wheel is cast with tin bronze, the wear-resisting performance is good, especially on the bearing capacity is more obvious, mainly applicable to plastic, metallurgy, beverage, mine, lifting transportation, chemical construction and other mechanical equipment speed reduction drive.

A.Features:

1. Stable transmission, low vibration, impact and noise, large reduction ratio, wide versatility and suitable for use with various mechanical equipment.

2. Large transmission ratio can be obtained by single-stage transmission, with compact structure. Most reducers have good self-locking property, and can save the brake device for mechanical equipment with brake requirements.

3. The meshing friction loss between worm screw teeth and worm gear surface is relatively large, so the transmission efficiency is lower than that of gear, and it is easy to be heated and the temperature is higher.

4. Higher requirements for lubrication and cooling.

5. Good interfitting. The worm and worm are manufactured in accordance with national standards.

B.Operating conditions:

1. The speed of worm reducer should not exceed 1500r/min.,

2.working environment temperature for -40 ℃ to + 40 ℃, when working environment temperature is lower than 0 ℃, lubricating oil must be heated before starting to more than 0 ℃, when working environment temperature is higher than 40 ℃, the cooling measures must be taken.

3. The feeding shaft of the worm gear reducer can rotate positively or negatively.

C.Notice:

1. The worm gear shaft must not be used as input shaft.

2. The machine does not pump oil at the factory. Sufficient mechanical oil must be added before operation.

3. The supporting motor (i.e. power) shall not exceed the value specified in the sign.

4. If the user wants to change the direction of entering the shaft, remove the lower end cover of the shaft, take out the worm shaft and adjust 180.Load it.Press install not hard knock, can slowly drive the two shafts, make it mesh.

Producet structure

Size table

Technology Data

Typ:		WP gearbox
Modell:		WP 40-250
Verhältnis:		1:10,15,20,25,30,40,50,60,200,300,400,500,600,800,900,1200,1500,1800,2400,2500,3000,3600
Farbe:		Blue/Silver Or On Customer Request
Material:		Housing: Die-Cast Iron cast
		Worm Gear-Copper-10-3#
		Worm-20CrMn Ti with carburizing and quenching, surface harness is 56-62HRC
		Welle – Chromstahl – 45#
Verpackung:		Carton and Wooden Case
Lager:		C&U Bearing
Siegel:		NAK SKF
Garantie:		one year
Eingangsleistung:		0.06KW,0.09KW,1.1KW,1.5KW 2.2KW,3KW,4KW,5.5KW,7.5KW
Anwendungsgebiete:		Industrial Machine: Food Stuff, Ceramics,CHEMICAL,Packing,Dyeing,Woodworking,Glass.
IEC-Flansch:		56B14, 63B14, 63B5, 63B5, 71B14,80B14 AND SO ON

Product show

Related Products

Häufig gestellte Fragen

F: Sind Sie ein Handelsunternehmen oder ein Hersteller?

A: Wir sind eine Fabrik.

F: Wie lange ist Ihre Lieferzeit?

A: Generally it is 7-15 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it will depend on order quantity.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample, need to charge sample cost and freight charge.

F: Wie lauten Ihre Zahlungsbedingungen?

A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.

If you have another question, pls feel free to contact us as below: