توضیحات محصول
توضیحات محصول
مواد اصلی:
۱) محفظه: آلیاژ آلومینیوم ADC12 (سایز ۵۷۱-۰۹۰)؛ چدن دایکاست HT200 (سایز ۱۱۰-۱۵۰)؛
2)Worm:20Cr, ZI Involute profile; carbonize&quencher heat treatment make gear surface hardness up to 56-62 HRC; After precision grinding, carburization layer’s thickness between 0.3-0.5mm.
۳) چرخ کرم: آلیاژ استنوم پوشیدنی CuSn10-1
عکسهای تفصیلی
گزینههای ترکیبی:
ورودی: با شفت ورودی، با فلنج مربعی، با فلنج ورودی استاندارد IEC
خروجی: با بازوی گشتاور، فلنج خروجی، شفت خروجی تکی، شفت خروجی دوتایی، پوشش پلاستیکی
کاهندههای حلزونی با ترکیبهای مختلفی موجود هستند: NMRV+NMRV، NMRV+NRV، NMRV+PC، NMRV+UDL، NMRV+MOTORS
نمای انفجاری:
پارامترهای محصول
| مدل قدیمی | مدل جدید | نسبت | فاصله مرکز | قدرت | قطر ورودی | قطر خروجی | گشتاور خروجی | وزن |
| RV571 | 7.5~100 | ۲۵ میلیمتر | 0.06 کیلووات ~ 0.12 کیلووات | Φ9 | Φ11 | ۲۱ نیوتن متر | 0.7 کیلوگرم | |
| RV030 | RW030 | 7.5~100 | 30 میلیمتر | 0.06 کیلووات ~ 0.25 کیلووات | Φ9 (Φ11) | Φ14 | ۴۵ نیوتن متر | ۱.۲ کیلوگرم |
| RV040 | RW040 | 7.5~100 | ۴۰ میلیمتر | 0.09 کیلووات ~ 0.55 کیلووات | Φ9 (Φ11، Φ14) | Φ18 (Φ19) | ۸۴ نیوتن متر | ۲.۳ کیلوگرم |
| RV050 | RW050 | 7.5~100 | ۵۰ میلیمتر | 0.12 کیلووات ~ 1.5 کیلووات | Φ11 (Φ14، Φ19) | Φ25 (Φ24) | ۱۶۰ نیوتن متر | ۳.۵ کیلوگرم |
| RV063 | RW063 | 7.5~100 | ۶۳ میلیمتر | 0.18 کیلووات ~ 2.2 کیلووات | Φ14 (Φ19، Φ24) | Φ25 (Φ28) | ۲۳۰ نیوتن متر | ۶.۲ کیلوگرم |
| RV075 | RW075 | 7.5~100 | ۷۵ میلیمتر | 0.25 کیلووات ~ 4.0 کیلووات | Φ14 (Φ19، Φ24، Φ28) | Φ28 (Φ35) | ۴۱۰ نیوتن متر | ۹.۰ کیلوگرم |
| RV090 | RW090 | 7.5~100 | ۹۰ میلیمتر | 0.37 کیلووات ~ 4.0 کیلووات | Φ19 (Φ24، Φ28) | Φ35 (Φ38) | ۷۲۵ نیوتن متر | ۱۳.۰ کیلوگرم |
| RV110 | RW110 | 7.5~100 | ۱۱۰ میلیمتر | 0.55 کیلووات ~ 7.5 کیلووات | Φ19 (Φ24، Φ28، Φ38) | Φ42 | 1050 نیوتن متر | ۳۵.۰ کیلوگرم |
| RV130 | RW130 | 7.5~100 | ۱۳۰ میلیمتر | 0.75 کیلووات ~ 7.5 کیلووات | Φ24 (Φ28، Φ38) | Φ45 | ۱۵۵۰ نیوتن متر | ۴۸.۰ کیلوگرم |
| آر وی ۱۵۰ | آر دبلیو ۱۵۰ | 7.5~100 | ۱۵۰ میلیمتر | 2.2 کیلووات ~ 15 کیلووات | Φ28 (Φ38، Φ42) | Φ50 | ۸۴.۰ کیلوگرم |
ابعاد کلی GMRV:
| جیامآروی | الف | ب | سی | سی۱ | دی(H8) | ه(h8) | ف | جی | جی۱ | ح | اچ۱ | من | م | ن | ای | پ | س | ر | س | تی | بی ال | بتا | ب | تی | پنجم |
| 030 | 80 | 97 | 54 | 44 | 14 | 55 | 32 | 56 | 63 | 65 | 29 | 55 | 40 | 57 | 30 | 75 | 44 | 6.5 | 21 | 5.5 | M6*10(n=4) | ۰ درجه | 5 | 16.3 | 27 |
| 040 | 100 | 121.5 | 70 | 60 | 18(19) | 60 | 43 | 71 | 78 | 75 | 36.5 | 70 | 50 | 71.5 | 40 | 87 | 55 | 6.5 | 26 | 6.5 | M6*10(n=4) | ۴۵ درجه | 6 | 20.8(21.8) | 35 |
| 050 | 120 | 144 | 80 | 70 | 25(24) | 70 | 49 | 85 | 92 | 85 | 43.5 | 80 | 60 | 84 | 50 | 100 | 64 | 8.5 | 30 | 7 | M8*12(n=4) | ۴۵ درجه | 8 | 28.3(27.3) | 40 |
| 063 | 144 | 174 | 100 | 85 | 25(28) | 80 | 67 | 103 | 112 | 95 | 53 | 95 | 72 | 102 | 63 | 110 | 80 | 8.5 | 36 | 8 | M8*12(n=8) | ۴۵ درجه | 8 | 28.3(31.3) | 50 |
| 075 | 172 | 205 | 120 | 90 | 28(35) | 95 | 72 | 112 | 120 | 115 | 57 | 112.5 | 86 | 119 | 75 | 140 | 93 | 11 | 40 | 10 | M8*14(n=8) | ۴۵ درجه | 8(10) | 31.3(38.3) | 60 |
| 090 | 206 | 238 | 140 | 100 | 35(38) | 110 | 74 | 130 | 140 | 130 | 67 | 129.5 | 103 | 135 | 90 | 160 | 102 | 13 | 45 | 11 | M10*16(n=8) | ۴۵ درجه | 10 | 38.3(41.3) | 70 |
| 110 | 255 | 295 | 170 | 115 | 42 | 130 | – | 144 | 155 | 165 | 74 | 160 | 127.5 | 167.5 | 110 | 200 | 125 | 14 | 50 | 14 | M10*18(n=8) | ۴۵ درجه | 12 | 45.3 | 85 |
| 130 | 293 | 335 | 200 | 120 | 45 | 180 | – | 155 | 170 | 215 | 81 | 179 | 146.5 | 187.5 | 130 | 250 | 140 | 16 | 60 | 15 | M12*20(n=8) | ۴۵ درجه | 14 | 48.8 | 100 |
| 150 | 340 | 400 | 240 | 145 | 50 | 180 | – | 185 | 200 | 215 | 96 | 210 | 170 | 230 | 150 | 250 | 180 | 18 | 72.5 | 18 | M12*22(n=8) | ۴۵ درجه | 14 | 53.8 | 120 |
مشخصات شرکت
درباره انتقال CHINAMFG:
ما یک تولیدکننده حرفهای کاهنده هستیم که در هانگژو، استان ژانگژوگ واقع شدهایم.
محصولات پیشرو ما طیف کاملی از گیربکسهای حلزونی RV571-150، همچنین گیربکس مارپیچی هیپوئیدی GKM، گیربکس مارپیچی درون خطی GRC، واحدهای PC، واریاتورهای UDL و موتورهای AC، موتور دنده مارپیچی G3 را شامل میشود.
محصولات به طور گسترده برای کاربردهایی مانند: مواد غذایی، سرامیک، بسته بندی، مواد شیمیایی، داروسازی، پلاستیک، کاغذ سازی، ماشین آلات ساختمانی، معدن متالورژی، مهندسی حفاظت از محیط زیست و انواع خطوط اتوماتیک و خطوط مونتاژ استفاده می شود.
با تحویل سریع، خدمات پس از فروش برتر، امکانات تولید پیشرفته، محصولات ما هم در داخل و هم در خارج از کشور به خوبی به فروش میرسند. ما گیربکسهای خود را به آسیای جنوب شرقی، اروپای شرقی و خاورمیانه و غیره صادر کردهایم. هدف ما توسعه و نوآوری بر اساس کیفیت بالا و ایجاد شهرت خوب برای گیربکسها است.
اطلاعات بستهبندی: کیسههای پلاستیکی + کارتن + جعبههای چوبی، یا بنا به درخواست
ما در نمایشگاه هانوفر آلمان - نمایشگاه PTC ژجیانگ - ترکیه در اوراسیا پیروز میشویم، شرکت میکنیم
لجستیک
خدمات پس از فروش
۱. زمان نگهداری و گارانتی: ظرف 1 سال پس از دریافت کالا.
2. خدمات دیگر: شامل راهنمای انتخاب مدل، راهنمای نصب و راهنمای حل مسئله و غیره.
سوالات متداول
1.Q: آیا می توانید طبق نقشه مشتری درست کنید؟
A: Yes, we offer customized service for customers accordingly. We can use customer’s nameplate for gearboxes.
2.Q: شرایط پرداخت شما چیست؟
A: سپرده 30% قبل از تولید، تعادل T/T قبل از تحویل.
3.Q: آیا شما یک شرکت تجاری یا تولید کننده هستید؟
الف: ما یک تولید کننده با تجهیزات پیشرفته و کارگران باتجربه هستیم.
4.Q:What’s your production capacity?
الف: 8000-9000 عدد در ماه
5.Q: نمونه رایگان موجود است یا خیر؟
A: بله، ما می توانیم نمونه رایگان را ارائه دهیم اگر مشتری موافقت کند که هزینه پیک را پرداخت کند
6.Q: آیا گواهی دارید؟
A: بله، ما گواهینامه CE و گزارش گواهینامه SGS داریم.
اطلاعات تماس:
خانم لینگل پن
برای هرگونه سوال، فقط کافیست با من تماس بگیرید. از توجه شما به شرکت ما بسیار سپاسگزاریم!
| کاربرد: | موتور، ماشین آلات، دریایی، ماشین آلات کشاورزی، صنعت |
|---|---|
| عملکرد: | Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction |
| طرح بندی: | زاویه قائمه |
| سختی: | سطح دندانه سخت شده |
| نصب: | نوع افقی |
| مرحله: | دو مرحلهای |
| نمونهها: | US$ 10/قطعه ۱ قطعه (حداقل سفارش) | |
|---|
| سفارشی سازی: | موجود است | درخواست سفارشی |
|---|
How to Install and Align a Worm Reducer Properly
Proper installation and alignment of a worm reducer are crucial for ensuring optimal performance and longevity. Follow these steps to install and align a worm reducer:
- Preparation: Gather all the necessary tools, equipment, and safety gear before starting the installation process.
- Positioning: Place the worm reducer in the desired location, ensuring that it is securely mounted to a stable surface. Use appropriate fasteners and mounting brackets as needed.
- Shaft Alignment: Check the alignment of the input and output shafts. Use precision measurement tools to ensure that the shafts are parallel and in line with each other.
- Base Plate Alignment: Align the base plate of the reducer with the foundation or mounting surface. Ensure that the base plate is level and properly aligned before securing it in place.
- Bolt Tightening: Gradually and evenly tighten the mounting bolts to the manufacturer’s specifications. This helps ensure proper contact between the reducer and the mounting surface.
- Check for Clearance: Verify that there is enough clearance for any rotating components or parts that may move during operation. Avoid any interference that could cause damage or performance issues.
- روغن کاری: Apply the recommended lubricant to the worm reducer according to the manufacturer’s guidelines. Proper lubrication is essential for smooth operation and reducing friction.
- Alignment Testing: After installation, run the worm reducer briefly without a load to check for any unusual noises, vibrations, or misalignment issues.
- Load Testing: Gradually introduce the intended load to the worm reducer and monitor its performance. Ensure that the reducer operates smoothly and efficiently under the load conditions.
It’s important to refer to the manufacturer’s installation guidelines and specifications for your specific worm reducer model. Proper installation and alignment will contribute to the gearbox’s reliability, efficiency, and overall functionality.
Does a Worm Reducer Require Frequent Maintenance?
Worm reducers generally require less frequent maintenance compared to some other types of gearboxes due to their design and operating characteristics. However, maintenance is still essential to ensure optimal performance and longevity. Here are some key points to consider:
- روغن کاری: Proper lubrication is crucial for worm gearboxes. Regularly check the lubricant level and quality to prevent wear and overheating. Lubricant should be changed as recommended by the manufacturer.
- Inspections: Periodically inspect the gearbox for signs of wear, damage, or oil leaks. Check for any unusual noises, vibrations, or changes in performance that could indicate a problem.
- Tightening and Alignment: Check and tighten any loose fasteners and ensure that the gearbox is properly aligned. Misalignment can lead to increased wear and reduced efficiency.
- Seal Maintenance: Inspect and maintain seals to prevent oil leakage and contaminants from entering the gearbox.
- Cleaning: Keep the gearbox clean from debris and contaminants that could affect its performance. Regular cleaning can prevent premature wear and damage.
- Load and Speed: Ensure that the gearbox is operating within its rated load and speed limits. Exceeding these limits can lead to accelerated wear and potential failure.
- Environmental Conditions: Consider the operating environment of the gearbox. Extreme temperatures, humidity, and other factors can impact the gearbox’s performance and longevity.
While worm gearboxes are known for their durability and self-locking feature, neglecting maintenance can lead to premature wear, reduced efficiency, and potential breakdowns. Following the manufacturer’s recommendations for maintenance intervals and procedures is essential to keep the worm reducer in optimal condition.
Can a Worm Gearbox Provide High Torque Output?
Yes, a worm gearbox is capable of providing high torque output due to its unique design and principle of operation. Worm gears are known for their high torque multiplication capabilities, making them suitable for applications that require significant torque transfer.
The torque output of a worm gearbox is influenced by several factors:
- Lead Angle: The lead angle of the worm affects the mechanical advantage of the gear system. A larger lead angle can result in higher torque output.
- Worm Diameter: A larger diameter worm can offer increased torque output as it provides more contact area with the gear.
- Gear Ratio: The gear ratio between the worm and the gear determines the torque multiplication factor. A higher gear ratio leads to higher torque output.
- روغن کاری: Proper lubrication is essential to minimize friction and ensure efficient torque transmission.
- Material and Quality: High-quality materials and precision manufacturing contribute to the gearbox’s ability to handle high torque loads.
Due to their ability to provide high torque output in a compact form factor, worm gearboxes are commonly used in various industrial applications, including heavy machinery, construction equipment, conveyor systems, and more.
editor by CX 2023-09-22