توضیحات محصول
توضیحات محصول
مواد اصلی:
۱) محفظه: آلیاژ آلومینیوم ADC12 (سایز ۵۷۱-۰۹۰)؛ چدن دایکاست HT200 (سایز ۱۱۰-۱۵۰)؛
2)Worm:20Cr, ZI Involute profile; carbonize&quencher heat treatment make gear surface hardness up to 56-62 HRC; After precision grinding, carburization layer’s thickness between 0.3-0.5mm.
۳) چرخ کرم: آلیاژ استنوم پوشیدنی CuSn10-1
عکسهای تفصیلی
گزینههای ترکیبی:
ورودی: با شفت ورودی، با فلنج مربعی، با فلنج ورودی استاندارد IEC
خروجی: با بازوی گشتاور، فلنج خروجی، شفت خروجی تکی، شفت خروجی دوتایی، پوشش پلاستیکی
کاهندههای حلزونی با ترکیبهای مختلفی موجود هستند: NMRV+NMRV، NMRV+NRV، NMRV+PC، NMRV+UDL، NMRV+MOTORS
نمای انفجاری:
پارامترهای محصول
| مدل قدیمی | مدل جدید | نسبت | فاصله مرکز | قدرت | قطر ورودی | قطر خروجی | گشتاور خروجی | وزن |
| RV571 | 7.5~100 | ۲۵ میلیمتر | 0.06 کیلووات ~ 0.12 کیلووات | Φ9 | Φ11 | ۲۱ نیوتن متر | 0.7 کیلوگرم | |
| RV030 | RW030 | 7.5~100 | 30 میلیمتر | 0.06 کیلووات ~ 0.25 کیلووات | Φ9 (Φ11) | Φ14 | ۴۵ نیوتن متر | ۱.۲ کیلوگرم |
| RV040 | RW040 | 7.5~100 | ۴۰ میلیمتر | 0.09 کیلووات ~ 0.55 کیلووات | Φ9 (Φ11، Φ14) | Φ18 (Φ19) | ۸۴ نیوتن متر | ۲.۳ کیلوگرم |
| RV050 | RW050 | 7.5~100 | ۵۰ میلیمتر | 0.12 کیلووات ~ 1.5 کیلووات | Φ11 (Φ14، Φ19) | Φ25 (Φ24) | ۱۶۰ نیوتن متر | ۳.۵ کیلوگرم |
| RV063 | RW063 | 7.5~100 | ۶۳ میلیمتر | 0.18 کیلووات ~ 2.2 کیلووات | Φ14 (Φ19، Φ24) | Φ25 (Φ28) | ۲۳۰ نیوتن متر | ۶.۲ کیلوگرم |
| RV075 | RW075 | 7.5~100 | ۷۵ میلیمتر | 0.25 کیلووات ~ 4.0 کیلووات | Φ14 (Φ19، Φ24، Φ28) | Φ28 (Φ35) | ۴۱۰ نیوتن متر | ۹.۰ کیلوگرم |
| RV090 | RW090 | 7.5~100 | ۹۰ میلیمتر | 0.37 کیلووات ~ 4.0 کیلووات | Φ19 (Φ24، Φ28) | Φ35 (Φ38) | ۷۲۵ نیوتن متر | ۱۳.۰ کیلوگرم |
| RV110 | RW110 | 7.5~100 | ۱۱۰ میلیمتر | 0.55 کیلووات ~ 7.5 کیلووات | Φ19 (Φ24، Φ28، Φ38) | Φ42 | 1050 نیوتن متر | ۳۵.۰ کیلوگرم |
| RV130 | RW130 | 7.5~100 | ۱۳۰ میلیمتر | 0.75 کیلووات ~ 7.5 کیلووات | Φ24 (Φ28، Φ38) | Φ45 | ۱۵۵۰ نیوتن متر | ۴۸.۰ کیلوگرم |
| آر وی ۱۵۰ | آر دبلیو ۱۵۰ | 7.5~100 | ۱۵۰ میلیمتر | 2.2 کیلووات ~ 15 کیلووات | Φ28 (Φ38، Φ42) | Φ50 | ۸۴.۰ کیلوگرم |
ابعاد کلی GMRV:
| جیامآروی | الف | ب | سی | سی۱ | دی(H8) | ه(h8) | ف | جی | جی۱ | ح | اچ۱ | من | م | ن | ای | پ | س | ر | س | تی | بی ال | بتا | ب | تی | پنجم |
| 030 | 80 | 97 | 54 | 44 | 14 | 55 | 32 | 56 | 63 | 65 | 29 | 55 | 40 | 57 | 30 | 75 | 44 | 6.5 | 21 | 5.5 | M6*10(n=4) | ۰ درجه | 5 | 16.3 | 27 |
| 040 | 100 | 121.5 | 70 | 60 | 18(19) | 60 | 43 | 71 | 78 | 75 | 36.5 | 70 | 50 | 71.5 | 40 | 87 | 55 | 6.5 | 26 | 6.5 | M6*10(n=4) | ۴۵ درجه | 6 | 20.8(21.8) | 35 |
| 050 | 120 | 144 | 80 | 70 | 25(24) | 70 | 49 | 85 | 92 | 85 | 43.5 | 80 | 60 | 84 | 50 | 100 | 64 | 8.5 | 30 | 7 | M8*12(n=4) | ۴۵ درجه | 8 | 28.3(27.3) | 40 |
| 063 | 144 | 174 | 100 | 85 | 25(28) | 80 | 67 | 103 | 112 | 95 | 53 | 95 | 72 | 102 | 63 | 110 | 80 | 8.5 | 36 | 8 | M8*12(n=8) | ۴۵ درجه | 8 | 28.3(31.3) | 50 |
| 075 | 172 | 205 | 120 | 90 | 28(35) | 95 | 72 | 112 | 120 | 115 | 57 | 112.5 | 86 | 119 | 75 | 140 | 93 | 11 | 40 | 10 | M8*14(n=8) | ۴۵ درجه | 8(10) | 31.3(38.3) | 60 |
| 090 | 206 | 238 | 140 | 100 | 35(38) | 110 | 74 | 130 | 140 | 130 | 67 | 129.5 | 103 | 135 | 90 | 160 | 102 | 13 | 45 | 11 | M10*16(n=8) | ۴۵ درجه | 10 | 38.3(41.3) | 70 |
| 110 | 255 | 295 | 170 | 115 | 42 | 130 | – | 144 | 155 | 165 | 74 | 160 | 127.5 | 167.5 | 110 | 200 | 125 | 14 | 50 | 14 | M10*18(n=8) | ۴۵ درجه | 12 | 45.3 | 85 |
| 130 | 293 | 335 | 200 | 120 | 45 | 180 | – | 155 | 170 | 215 | 81 | 179 | 146.5 | 187.5 | 130 | 250 | 140 | 16 | 60 | 15 | M12*20(n=8) | ۴۵ درجه | 14 | 48.8 | 100 |
| 150 | 340 | 400 | 240 | 145 | 50 | 180 | – | 185 | 200 | 215 | 96 | 210 | 170 | 230 | 150 | 250 | 180 | 18 | 72.5 | 18 | M12*22(n=8) | ۴۵ درجه | 14 | 53.8 | 120 |
مشخصات شرکت
درباره انتقال CHINAMFG:
ما یک تولیدکننده حرفهای کاهنده هستیم که در هانگژو، استان ژانگژوگ واقع شدهایم.
محصولات پیشرو ما طیف کاملی از گیربکسهای حلزونی RV571-150، همچنین گیربکس مارپیچی هیپوئیدی GKM، گیربکس مارپیچی درون خطی GRC، واحدهای PC، واریاتورهای UDL و موتورهای AC، موتور دنده مارپیچی G3 را شامل میشود.
محصولات به طور گسترده برای کاربردهایی مانند: مواد غذایی، سرامیک، بسته بندی، مواد شیمیایی، داروسازی، پلاستیک، کاغذ سازی، ماشین آلات ساختمانی، معدن متالورژی، مهندسی حفاظت از محیط زیست و انواع خطوط اتوماتیک و خطوط مونتاژ استفاده می شود.
با تحویل سریع، خدمات پس از فروش برتر، امکانات تولید پیشرفته، محصولات ما هم در داخل و هم در خارج از کشور به خوبی به فروش میرسند. ما گیربکسهای خود را به آسیای جنوب شرقی، اروپای شرقی و خاورمیانه و غیره صادر کردهایم. هدف ما توسعه و نوآوری بر اساس کیفیت بالا و ایجاد شهرت خوب برای گیربکسها است.
اطلاعات بستهبندی: کیسههای پلاستیکی + کارتن + جعبههای چوبی، یا بنا به درخواست
ما در نمایشگاه هانوفر آلمان - نمایشگاه PTC ژجیانگ - ترکیه در اوراسیا پیروز میشویم، شرکت میکنیم
لجستیک
خدمات پس از فروش
۱. زمان نگهداری و گارانتی: ظرف 1 سال پس از دریافت کالا.
2. خدمات دیگر: شامل راهنمای انتخاب مدل، راهنمای نصب و راهنمای حل مسئله و غیره.
سوالات متداول
1.Q: آیا می توانید طبق نقشه مشتری درست کنید؟
A: Yes, we offer customized service for customers accordingly. We can use customer’s nameplate for gearboxes.
2.Q: شرایط پرداخت شما چیست؟
A: سپرده 30% قبل از تولید، تعادل T/T قبل از تحویل.
3.Q: آیا شما یک شرکت تجاری یا تولید کننده هستید؟
الف: ما یک تولید کننده با تجهیزات پیشرفته و کارگران باتجربه هستیم.
4.Q:What’s your production capacity?
الف: 8000-9000 عدد در ماه
5.Q: نمونه رایگان موجود است یا خیر؟
A: بله، ما می توانیم نمونه رایگان را ارائه دهیم اگر مشتری موافقت کند که هزینه پیک را پرداخت کند
6.Q: آیا گواهی دارید؟
A: بله، ما گواهینامه CE و گزارش گواهینامه SGS داریم.
اطلاعات تماس:
خانم لینگل پن
برای هرگونه سوال، فقط کافیست با من تماس بگیرید. از توجه شما به شرکت ما بسیار سپاسگزاریم!
| کاربرد: | موتور، ماشین آلات، دریایی، ماشین آلات کشاورزی، صنعت |
|---|---|
| سختی: | سطح دندانه سخت شده |
| نصب: | نوع افقی |
| طرح بندی: | زاویه قائمه |
| شکل چرخ دنده: | Worm Gear |
| مرحله: | دو مرحلهای |
| نمونهها: | US$ 12/Piece ۱ قطعه (حداقل سفارش) | |
|---|
| سفارشی سازی: | موجود است | درخواست سفارشی |
|---|
What are the Noise Levels Associated with Worm Gearboxes?
The noise levels associated with worm gearboxes can vary depending on several factors, including the design, quality, operating conditions, and maintenance of the gearbox. Here are some key points to consider:
- Design and Quality: Well-designed and high-quality worm gearboxes tend to produce lower noise levels. Factors such as gear tooth profile, precision manufacturing, and proper alignment can contribute to reduced noise.
- Gear Engagement: The way the worm and worm wheel engage and mesh with each other can impact noise levels. Proper tooth contact and alignment can help minimize noise during operation.
- روغن کاری: Inadequate or improper lubrication can lead to increased friction and wear, resulting in higher noise levels. Using the recommended lubricant and maintaining proper lubrication levels are important for noise reduction.
- Operating Conditions: Operating the gearbox within its specified load and speed limits can help prevent excessive noise generation. Overloading or operating at high speeds beyond the gearbox’s capabilities can lead to increased noise.
- واکنش معکوس: Excessive backlash or play between the gear teeth can lead to impact noise as the teeth engage. Proper backlash adjustment can help mitigate this issue.
- تعمیر و نگهداری: Regular maintenance, including gear inspection, lubrication checks, and addressing any wear or damage, can help keep noise levels in check.
It’s important to note that while worm gearboxes can produce some noise due to the nature of gear meshing, proper design, maintenance, and operation can significantly reduce noise levels. If noise is a concern for your application, consulting with gearbox manufacturers and experts can provide insights into selecting the right gearbox type and implementing measures to minimize noise.
Worm Gearboxes in Conveyor Systems: Benefits and Considerations
Worm gearboxes play a crucial role in conveyor systems, offering several benefits and considerations for their effective integration:
- Space Efficiency: Worm gearboxes have a compact design, making them suitable for applications with limited space, such as conveyor systems.
- High Reduction Ratios: Worm gearboxes can achieve high reduction ratios in a single stage, allowing for slower conveyor speeds without sacrificing torque.
- خود قفل شونده: Worm gearboxes have inherent self-locking properties, preventing the conveyor from moving when the motor is not actively driving it.
- Directional Control: Worm gearboxes facilitate directional control, enabling the conveyor to move forward or reverse as needed.
- Low Noise: Worm gearboxes often produce lower noise levels compared to other gearbox types, contributing to quieter conveyor operation.
However, there are also considerations to keep in mind when using worm gearboxes in conveyor systems:
- کارایی: Worm gearboxes may have lower mechanical efficiency compared to some other gearbox types, leading to energy losses.
- تولید گرما: Worm gearboxes can generate more heat due to sliding contact between the worm and gear, necessitating proper cooling mechanisms.
- روغن کاری: Proper lubrication is critical to prevent wear and ensure efficient operation. Regular maintenance is required to monitor lubrication levels.
- Load and Speed: Worm gearboxes are well-suited for applications with high torque and low to moderate speed requirements. They may not be optimal for high-speed conveyors.
Before integrating a worm gearbox into a conveyor system, it’s important to carefully consider the specific requirements of the application, including load, speed, space constraints, and efficiency needs. Consulting with gearbox experts and manufacturers can help ensure the right choice for the conveyor’s performance and longevity.
Lubrication Requirements for a Worm Gearbox
Lubrication is crucial for maintaining the performance and longevity of a worm gearbox. Here are the key considerations for lubricating a worm gearbox:
- Type of Lubricant: Use a high-quality, high-viscosity lubricant specifically designed for worm gearboxes. Worm gearboxes require lubricants with additives that provide proper lubrication and prevent wear.
- Lubrication Interval: Follow the manufacturer’s recommendations for lubrication intervals. Regularly check the gearbox’s temperature and oil condition to determine the optimal frequency of lubrication.
- Oil Level: Maintain the proper oil level to ensure effective lubrication. Too little oil can lead to insufficient lubrication, while too much oil can cause overheating and foaming.
- Lubrication Points: Identify all the lubrication points on the gearbox, including the worm and wheel gear surfaces. Apply the lubricant evenly to ensure complete coverage.
- Temperature: Consider the operating temperature of the gearbox. Some lubricants have temperature limits, and extreme temperatures can affect lubricant viscosity and performance.
- Cleanliness: Keep the gearbox and the surrounding area clean to prevent contaminants from entering the lubricant. Use proper filtration and seals to maintain a clean environment.
- Monitoring: Regularly monitor the gearbox’s temperature, noise level, and vibration to detect any signs of inadequate lubrication or other issues.
Proper lubrication will reduce friction, wear, and heat generation, ensuring smooth and efficient operation of the worm gearbox. Always refer to the manufacturer’s guidelines for lubrication specifications and intervals.
editor by CX 2023-09-23