توضیحات محصول
توضیحات محصول
مواد اصلی:
۱) محفظه: آلیاژ آلومینیوم ADC12 (سایز ۵۷۱-۰۹۰)؛ چدن دایکاست HT200 (سایز ۱۱۰-۱۵۰)؛
2)Worm:20Cr, ZI Involute profile; carbonize&quencher heat treatment make gear surface hardness up to 56-62 HRC; After precision grinding, carburization layer’s thickness between 0.3-0.5mm.
۳) چرخ کرم: آلیاژ استنوم پوشیدنی CuSn10-1
عکسهای تفصیلی
گزینههای ترکیبی:
ورودی: با شفت ورودی، با فلنج مربعی، با فلنج ورودی استاندارد IEC
خروجی: با بازوی گشتاور، فلنج خروجی، شفت خروجی تکی، شفت خروجی دوتایی، پوشش پلاستیکی
کاهندههای حلزونی با ترکیبهای مختلفی موجود هستند: NMRV+NMRV، NMRV+NRV، NMRV+PC، NMRV+UDL، NMRV+MOTORS
نمای انفجاری:
پارامترهای محصول
| مدل قدیمی | مدل جدید | نسبت | فاصله مرکز | قدرت | قطر ورودی | قطر خروجی | گشتاور خروجی | وزن |
| RV571 | 7.5~100 | ۲۵ میلیمتر | 0.06 کیلووات ~ 0.12 کیلووات | Φ9 | Φ11 | ۲۱ نیوتن متر | 0.7 کیلوگرم | |
| RV030 | RW030 | 7.5~100 | 30 میلیمتر | 0.06 کیلووات ~ 0.25 کیلووات | Φ9 (Φ11) | Φ14 | ۴۵ نیوتن متر | ۱.۲ کیلوگرم |
| RV040 | RW040 | 7.5~100 | ۴۰ میلیمتر | 0.09 کیلووات ~ 0.55 کیلووات | Φ9 (Φ11، Φ14) | Φ18 (Φ19) | ۸۴ نیوتن متر | ۲.۳ کیلوگرم |
| RV050 | RW050 | 7.5~100 | ۵۰ میلیمتر | 0.12 کیلووات ~ 1.5 کیلووات | Φ11 (Φ14، Φ19) | Φ25 (Φ24) | ۱۶۰ نیوتن متر | ۳.۵ کیلوگرم |
| RV063 | RW063 | 7.5~100 | ۶۳ میلیمتر | 0.18 کیلووات ~ 2.2 کیلووات | Φ14 (Φ19، Φ24) | Φ25 (Φ28) | ۲۳۰ نیوتن متر | ۶.۲ کیلوگرم |
| RV075 | RW075 | 7.5~100 | ۷۵ میلیمتر | 0.25 کیلووات ~ 4.0 کیلووات | Φ14 (Φ19، Φ24، Φ28) | Φ28 (Φ35) | ۴۱۰ نیوتن متر | ۹.۰ کیلوگرم |
| RV090 | RW090 | 7.5~100 | ۹۰ میلیمتر | 0.37 کیلووات ~ 4.0 کیلووات | Φ19 (Φ24، Φ28) | Φ35 (Φ38) | ۷۲۵ نیوتن متر | ۱۳.۰ کیلوگرم |
| RV110 | RW110 | 7.5~100 | ۱۱۰ میلیمتر | 0.55 کیلووات ~ 7.5 کیلووات | Φ19 (Φ24، Φ28، Φ38) | Φ42 | 1050 نیوتن متر | ۳۵.۰ کیلوگرم |
| RV130 | RW130 | 7.5~100 | ۱۳۰ میلیمتر | 0.75 کیلووات ~ 7.5 کیلووات | Φ24 (Φ28، Φ38) | Φ45 | ۱۵۵۰ نیوتن متر | ۴۸.۰ کیلوگرم |
| آر وی ۱۵۰ | آر دبلیو ۱۵۰ | 7.5~100 | ۱۵۰ میلیمتر | 2.2 کیلووات ~ 15 کیلووات | Φ28 (Φ38، Φ42) | Φ50 | ۸۴.۰ کیلوگرم |
ابعاد کلی GMRV:
| جیامآروی | الف | ب | سی | سی۱ | دی(H8) | ه(h8) | ف | جی | جی۱ | ح | اچ۱ | من | م | ن | ای | پ | س | ر | س | تی | بی ال | بتا | ب | تی | پنجم |
| 030 | 80 | 97 | 54 | 44 | 14 | 55 | 32 | 56 | 63 | 65 | 29 | 55 | 40 | 57 | 30 | 75 | 44 | 6.5 | 21 | 5.5 | M6*10(n=4) | ۰ درجه | 5 | 16.3 | 27 |
| 040 | 100 | 121.5 | 70 | 60 | 18(19) | 60 | 43 | 71 | 78 | 75 | 36.5 | 70 | 50 | 71.5 | 40 | 87 | 55 | 6.5 | 26 | 6.5 | M6*10(n=4) | ۴۵ درجه | 6 | 20.8(21.8) | 35 |
| 050 | 120 | 144 | 80 | 70 | 25(24) | 70 | 49 | 85 | 92 | 85 | 43.5 | 80 | 60 | 84 | 50 | 100 | 64 | 8.5 | 30 | 7 | M8*12(n=4) | ۴۵ درجه | 8 | 28.3(27.3) | 40 |
| 063 | 144 | 174 | 100 | 85 | 25(28) | 80 | 67 | 103 | 112 | 95 | 53 | 95 | 72 | 102 | 63 | 110 | 80 | 8.5 | 36 | 8 | M8*12(n=8) | ۴۵ درجه | 8 | 28.3(31.3) | 50 |
| 075 | 172 | 205 | 120 | 90 | 28(35) | 95 | 72 | 112 | 120 | 115 | 57 | 112.5 | 86 | 119 | 75 | 140 | 93 | 11 | 40 | 10 | M8*14(n=8) | ۴۵ درجه | 8(10) | 31.3(38.3) | 60 |
| 090 | 206 | 238 | 140 | 100 | 35(38) | 110 | 74 | 130 | 140 | 130 | 67 | 129.5 | 103 | 135 | 90 | 160 | 102 | 13 | 45 | 11 | M10*16(n=8) | ۴۵ درجه | 10 | 38.3(41.3) | 70 |
| 110 | 255 | 295 | 170 | 115 | 42 | 130 | – | 144 | 155 | 165 | 74 | 160 | 127.5 | 167.5 | 110 | 200 | 125 | 14 | 50 | 14 | M10*18(n=8) | ۴۵ درجه | 12 | 45.3 | 85 |
| 130 | 293 | 335 | 200 | 120 | 45 | 180 | – | 155 | 170 | 215 | 81 | 179 | 146.5 | 187.5 | 130 | 250 | 140 | 16 | 60 | 15 | M12*20(n=8) | ۴۵ درجه | 14 | 48.8 | 100 |
| 150 | 340 | 400 | 240 | 145 | 50 | 180 | – | 185 | 200 | 215 | 96 | 210 | 170 | 230 | 150 | 250 | 180 | 18 | 72.5 | 18 | M12*22(n=8) | ۴۵ درجه | 14 | 53.8 | 120 |
مشخصات شرکت
درباره انتقال CHINAMFG:
ما یک تولیدکننده حرفهای کاهنده هستیم که در هانگژو، استان ژانگژوگ واقع شدهایم.
محصولات پیشرو ما طیف کاملی از گیربکسهای حلزونی RV571-150، همچنین گیربکس مارپیچی هیپوئیدی GKM، گیربکس مارپیچی درون خطی GRC، واحدهای PC، واریاتورهای UDL و موتورهای AC، موتور دنده مارپیچی G3 را شامل میشود.
محصولات به طور گسترده برای کاربردهایی مانند: مواد غذایی، سرامیک، بسته بندی، مواد شیمیایی، داروسازی، پلاستیک، کاغذ سازی، ماشین آلات ساختمانی، معدن متالورژی، مهندسی حفاظت از محیط زیست و انواع خطوط اتوماتیک و خطوط مونتاژ استفاده می شود.
با تحویل سریع، خدمات پس از فروش برتر، امکانات تولید پیشرفته، محصولات ما هم در داخل و هم در خارج از کشور به خوبی به فروش میرسند. ما گیربکسهای خود را به آسیای جنوب شرقی، اروپای شرقی و خاورمیانه و غیره صادر کردهایم. هدف ما توسعه و نوآوری بر اساس کیفیت بالا و ایجاد شهرت خوب برای گیربکسها است.
اطلاعات بستهبندی: کیسههای پلاستیکی + کارتن + جعبههای چوبی، یا بنا به درخواست
ما در نمایشگاه هانوفر آلمان - نمایشگاه PTC ژجیانگ - ترکیه در اوراسیا پیروز میشویم، شرکت میکنیم
لجستیک
خدمات پس از فروش
۱. زمان نگهداری و گارانتی: ظرف 1 سال پس از دریافت کالا.
2. خدمات دیگر: شامل راهنمای انتخاب مدل، راهنمای نصب و راهنمای حل مسئله و غیره.
سوالات متداول
1.Q: آیا می توانید طبق نقشه مشتری درست کنید؟
A: Yes, we offer customized service for customers accordingly. We can use customer’s nameplate for gearboxes.
2.Q: شرایط پرداخت شما چیست؟
A: سپرده 30% قبل از تولید، تعادل T/T قبل از تحویل.
3.Q: آیا شما یک شرکت تجاری یا تولید کننده هستید؟
الف: ما یک تولید کننده با تجهیزات پیشرفته و کارگران باتجربه هستیم.
4.Q:What’s your production capacity?
الف: 8000-9000 عدد در ماه
5.Q: نمونه رایگان موجود است یا خیر؟
A: بله، ما می توانیم نمونه رایگان را ارائه دهیم اگر مشتری موافقت کند که هزینه پیک را پرداخت کند
6.Q: آیا گواهی دارید؟
A: بله، ما گواهینامه CE و گزارش گواهینامه SGS داریم.
اطلاعات تماس:
خانم لینگل پن
برای هرگونه سوال، فقط کافیست با من تماس بگیرید. از توجه شما به شرکت ما بسیار سپاسگزاریم!
| کاربرد: | موتور، ماشین آلات، دریایی، ماشین آلات کشاورزی، صنعت |
|---|---|
| سختی: | سطح دندانه سخت شده |
| نصب: | نوع افقی |
| طرح بندی: | زاویه قائمه |
| شکل چرخ دنده: | Worm Gear |
| مرحله: | دو مرحلهای |
| نمونهها: | US$ 30/Piece ۱ قطعه (حداقل سفارش) | |
|---|
| سفارشی سازی: | موجود است | درخواست سفارشی |
|---|
Maintenance Tips for Prolonging the Life of a Worm Gearbox
Proper maintenance is essential to ensure the longevity and reliable performance of a worm gearbox. Here are some maintenance tips to consider:
- روغن کاری: Regularly check and replenish the lubricant in the gearbox. Use the recommended lubricant type and quantity specified by the manufacturer.
- Lubrication Schedule: Follow a lubrication schedule based on the operating conditions and manufacturer recommendations. Regular lubrication prevents friction, reduces wear, and dissipates heat.
- Temperature Monitoring: Keep an eye on the operating temperature of the gearbox. Excessive heat can degrade the lubricant and damage components.
- Cleanliness: Keep the gearbox and surrounding area clean from debris and contaminants. Regularly inspect and clean the gearbox exterior.
- Seal Inspection: Check for any leaks or damage to seals and gaskets. Replace them promptly to prevent lubricant leaks and contamination.
- Alignment: Ensure proper alignment between the worm and worm wheel. Misalignment can lead to increased wear and reduced efficiency.
- Torque Monitoring: Monitor the torque levels during operation. Excessive torque can cause overloading and premature wear.
- Regular Inspections: Periodically inspect all components for signs of wear, damage, or unusual noise. Replace worn or damaged parts promptly.
- Proper Usage: Operate the gearbox within its specified limits, including load, speed, and temperature. Avoid overloading or sudden changes in operating conditions.
- Expert Maintenance: If major maintenance or repairs are needed, consult the manufacturer’s guidelines or seek the assistance of qualified technicians.
By following these maintenance tips and adhering to the manufacturer’s recommendations, you can extend the lifespan of your worm gearbox and ensure its optimal performance over time.
Worm Gearbox Applications in Robotics and Automation
Worm gearboxes play a crucial role in various robotics and automation applications due to their unique characteristics and benefits. Here are some common applications where worm gearboxes are used:
- Robotic Arm Movement: Worm gearboxes are employed in robotic arms to provide precise and controlled movement. The self-locking property of worm gearboxes helps maintain the arm’s position without requiring additional brakes.
- Conveyor Systems: In automated production lines, worm gearboxes are used to drive conveyor belts and move materials or products along assembly lines with accuracy.
- Precision Positioning: Worm gearboxes are used in precision positioning systems, such as those found in pick-and-place robots and CNC machines. They ensure accurate and repeatable movements.
- Pan and Tilt Mechanisms: Worm gearboxes are utilized in pan and tilt mechanisms of surveillance cameras, robotic cameras, and sensors. The self-locking feature helps stabilize and maintain the desired angle.
- Automated Gates and Doors: Worm gearboxes are used in automated gate and door systems to control their opening and closing movements smoothly and safely.
- Material Handling: Robots in warehouses and distribution centers use worm gearboxes to manipulate and lift objects, enhancing efficiency in material handling.
- Medical Robotics: Worm gearboxes are employed in medical robots for surgical procedures, diagnostic equipment, and rehabilitation devices, ensuring precise and controlled movements.
- Industrial Robots: Industrial robots rely on worm gearboxes for various tasks, including welding, painting, assembly, and packaging, where precise movements are essential.
- Automated Testing Equipment: In testing and inspection applications, worm gearboxes provide the necessary movement and positioning for accurate testing and measurements.
- Food and Beverage Industry: Worm gearboxes are used in automated food processing and packaging systems, ensuring hygienic and precise movement of products.
Worm gearboxes are preferred in these applications due to their compact size, high torque output, self-locking feature, and ability to provide a right-angle drive. However, selecting the right gearbox requires considering factors such as load, speed, efficiency, and environmental conditions.
جلوگیری از لقی در گیربکس حلزونی
لقی در گیربکس حلزونی میتواند منجر به کاهش دقت، خطاهای موقعیتیابی و کاهش راندمان کلی شود. در اینجا مراحلی برای جلوگیری یا به حداقل رساندن لقی ارائه شده است:
- قطعات با کیفیت بالا: از چرخ دندههای حلزونی و حلزونی با کیفیت بالا و تلرانسهای تولید پایین استفاده کنید. قطعات دقیق به کاهش لقی کمک میکنند.
- شبکه بندی مناسب: مطمئن شوید که چرخ دنده حلزونی و چرخ حلزون به درستی تراز و درگیر شدهاند. درگیری نامناسب میتواند منجر به افزایش لقی شود.
- پیش بارگذاری: اعمال مقدار کمی پیشبار به چرخدنده حلزونی میتواند به کاهش لقی کمک کند. با این حال، پیشبار بیش از حد میتواند اصطکاک و سایش را افزایش دهد.
- مکانیسمهای ضد واکنش شدید: برای جبران هرگونه لقی ذاتی، استفاده از مکانیسمهای ضد لقی، مانند سیستمهای فنری یا واشرهای قابل تنظیم را در نظر بگیرید.
- روغن کاری: روانکاری مناسب میتواند اصطکاک را کاهش داده و در به حداقل رساندن لقی نقش داشته باشد. از روانکاری استفاده کنید که استحکام لایه نازک خوبی را فراهم کرده و سایش را کاهش دهد.
- تعمیر و نگهداری: به طور منظم گیربکس را بازرسی و نگهداری کنید تا هرگونه تغییر در لقی را با گذشت زمان شناسایی و برطرف کنید.
It’s important to strike a balance between reducing backlash and maintaining smooth operation. Consulting with gearbox experts and following manufacturer guidelines will help you optimize your worm gearbox’s performance while minimizing backlash.
ویرایشگر توسط CX 2023-09-27