توضیحات محصول
توضیحات محصول
مواد اصلی:
۱) محفظه: آلیاژ آلومینیوم ADC12 (سایز ۵۷۱-۰۹۰)؛ چدن دایکاست HT200 (سایز ۱۱۰-۱۵۰)؛
2)Worm:20Cr, ZI Involute profile; carbonize&quencher heat treatment make gear surface hardness up to 56-62 HRC; After precision grinding, carburization layer’s thickness between 0.3-0.5mm.
۳) چرخ کرم: آلیاژ استنوم پوشیدنی CuSn10-1
عکسهای تفصیلی
گزینههای ترکیبی:
ورودی: با شفت ورودی، با فلنج مربعی، با فلنج ورودی استاندارد IEC
خروجی: با بازوی گشتاور، فلنج خروجی، شفت خروجی تکی، شفت خروجی دوتایی، پوشش پلاستیکی
کاهندههای حلزونی با ترکیبهای مختلفی موجود هستند: NMRV+NMRV، NMRV+NRV، NMRV+PC، NMRV+UDL، NMRV+MOTORS
نمای انفجاری:
پارامترهای محصول
| مدل قدیمی | مدل جدید | نسبت | فاصله مرکز | قدرت | قطر ورودی | قطر خروجی | گشتاور خروجی | وزن |
| RV571 | 7.5~100 | ۲۵ میلیمتر | 0.06 کیلووات ~ 0.12 کیلووات | Φ9 | Φ11 | ۲۱ نیوتن متر | 0.7 کیلوگرم | |
| RV030 | RW030 | 7.5~100 | 30 میلیمتر | 0.06 کیلووات ~ 0.25 کیلووات | Φ9 (Φ11) | Φ14 | ۴۵ نیوتن متر | ۱.۲ کیلوگرم |
| RV040 | RW040 | 7.5~100 | ۴۰ میلیمتر | 0.09 کیلووات ~ 0.55 کیلووات | Φ9 (Φ11، Φ14) | Φ18 (Φ19) | ۸۴ نیوتن متر | ۲.۳ کیلوگرم |
| RV050 | RW050 | 7.5~100 | ۵۰ میلیمتر | 0.12 کیلووات ~ 1.5 کیلووات | Φ11 (Φ14، Φ19) | Φ25 (Φ24) | ۱۶۰ نیوتن متر | ۳.۵ کیلوگرم |
| RV063 | RW063 | 7.5~100 | ۶۳ میلیمتر | 0.18 کیلووات ~ 2.2 کیلووات | Φ14 (Φ19، Φ24) | Φ25 (Φ28) | ۲۳۰ نیوتن متر | ۶.۲ کیلوگرم |
| RV075 | RW075 | 7.5~100 | ۷۵ میلیمتر | 0.25 کیلووات ~ 4.0 کیلووات | Φ14 (Φ19، Φ24، Φ28) | Φ28 (Φ35) | ۴۱۰ نیوتن متر | ۹.۰ کیلوگرم |
| RV090 | RW090 | 7.5~100 | ۹۰ میلیمتر | 0.37 کیلووات ~ 4.0 کیلووات | Φ19 (Φ24، Φ28) | Φ35 (Φ38) | ۷۲۵ نیوتن متر | ۱۳.۰ کیلوگرم |
| RV110 | RW110 | 7.5~100 | ۱۱۰ میلیمتر | 0.55 کیلووات ~ 7.5 کیلووات | Φ19 (Φ24، Φ28، Φ38) | Φ42 | 1050 نیوتن متر | ۳۵.۰ کیلوگرم |
| RV130 | RW130 | 7.5~100 | ۱۳۰ میلیمتر | 0.75 کیلووات ~ 7.5 کیلووات | Φ24 (Φ28، Φ38) | Φ45 | ۱۵۵۰ نیوتن متر | ۴۸.۰ کیلوگرم |
| آر وی ۱۵۰ | آر دبلیو ۱۵۰ | 7.5~100 | ۱۵۰ میلیمتر | 2.2 کیلووات ~ 15 کیلووات | Φ28 (Φ38، Φ42) | Φ50 | ۸۴.۰ کیلوگرم |
ابعاد کلی GMRV:
| جیامآروی | الف | ب | سی | سی۱ | دی(H8) | ه(h8) | ف | جی | جی۱ | ح | اچ۱ | من | م | ن | ای | پ | س | ر | س | تی | بی ال | بتا | ب | تی | پنجم |
| 030 | 80 | 97 | 54 | 44 | 14 | 55 | 32 | 56 | 63 | 65 | 29 | 55 | 40 | 57 | 30 | 75 | 44 | 6.5 | 21 | 5.5 | M6*10(n=4) | ۰ درجه | 5 | 16.3 | 27 |
| 040 | 100 | 121.5 | 70 | 60 | 18(19) | 60 | 43 | 71 | 78 | 75 | 36.5 | 70 | 50 | 71.5 | 40 | 87 | 55 | 6.5 | 26 | 6.5 | M6*10(n=4) | ۴۵ درجه | 6 | 20.8(21.8) | 35 |
| 050 | 120 | 144 | 80 | 70 | 25(24) | 70 | 49 | 85 | 92 | 85 | 43.5 | 80 | 60 | 84 | 50 | 100 | 64 | 8.5 | 30 | 7 | M8*12(n=4) | ۴۵ درجه | 8 | 28.3(27.3) | 40 |
| 063 | 144 | 174 | 100 | 85 | 25(28) | 80 | 67 | 103 | 112 | 95 | 53 | 95 | 72 | 102 | 63 | 110 | 80 | 8.5 | 36 | 8 | M8*12(n=8) | ۴۵ درجه | 8 | 28.3(31.3) | 50 |
| 075 | 172 | 205 | 120 | 90 | 28(35) | 95 | 72 | 112 | 120 | 115 | 57 | 112.5 | 86 | 119 | 75 | 140 | 93 | 11 | 40 | 10 | M8*14(n=8) | ۴۵ درجه | 8(10) | 31.3(38.3) | 60 |
| 090 | 206 | 238 | 140 | 100 | 35(38) | 110 | 74 | 130 | 140 | 130 | 67 | 129.5 | 103 | 135 | 90 | 160 | 102 | 13 | 45 | 11 | M10*16(n=8) | ۴۵ درجه | 10 | 38.3(41.3) | 70 |
| 110 | 255 | 295 | 170 | 115 | 42 | 130 | – | 144 | 155 | 165 | 74 | 160 | 127.5 | 167.5 | 110 | 200 | 125 | 14 | 50 | 14 | M10*18(n=8) | ۴۵ درجه | 12 | 45.3 | 85 |
| 130 | 293 | 335 | 200 | 120 | 45 | 180 | – | 155 | 170 | 215 | 81 | 179 | 146.5 | 187.5 | 130 | 250 | 140 | 16 | 60 | 15 | M12*20(n=8) | ۴۵ درجه | 14 | 48.8 | 100 |
| 150 | 340 | 400 | 240 | 145 | 50 | 180 | – | 185 | 200 | 215 | 96 | 210 | 170 | 230 | 150 | 250 | 180 | 18 | 72.5 | 18 | M12*22(n=8) | ۴۵ درجه | 14 | 53.8 | 120 |
مشخصات شرکت
درباره انتقال CHINAMFG:
ما یک تولیدکننده حرفهای کاهنده هستیم که در هانگژو، استان ژانگژوگ واقع شدهایم.
محصولات پیشرو ما طیف کاملی از گیربکسهای حلزونی RV571-150، همچنین گیربکس مارپیچی هیپوئیدی GKM، گیربکس مارپیچی درون خطی GRC، واحدهای PC، واریاتورهای UDL و موتورهای AC، موتور دنده مارپیچی G3 را شامل میشود.
محصولات به طور گسترده برای کاربردهایی مانند: مواد غذایی، سرامیک، بسته بندی، مواد شیمیایی، داروسازی، پلاستیک، کاغذ سازی، ماشین آلات ساختمانی، معدن متالورژی، مهندسی حفاظت از محیط زیست و انواع خطوط اتوماتیک و خطوط مونتاژ استفاده می شود.
با تحویل سریع، خدمات پس از فروش برتر، امکانات تولید پیشرفته، محصولات ما هم در داخل و هم در خارج از کشور به خوبی به فروش میرسند. ما گیربکسهای خود را به آسیای جنوب شرقی، اروپای شرقی و خاورمیانه و غیره صادر کردهایم. هدف ما توسعه و نوآوری بر اساس کیفیت بالا و ایجاد شهرت خوب برای گیربکسها است.
اطلاعات بستهبندی: کیسههای پلاستیکی + کارتن + جعبههای چوبی، یا بنا به درخواست
ما در نمایشگاه هانوفر آلمان - نمایشگاه PTC ژجیانگ - ترکیه در اوراسیا پیروز میشویم، شرکت میکنیم
لجستیک
خدمات پس از فروش
۱. زمان نگهداری و گارانتی: ظرف 1 سال پس از دریافت کالا.
2. خدمات دیگر: شامل راهنمای انتخاب مدل، راهنمای نصب و راهنمای حل مسئله و غیره.
سوالات متداول
1.Q: آیا می توانید طبق نقشه مشتری درست کنید؟
A: Yes, we offer customized service for customers accordingly. We can use customer’s nameplate for gearboxes.
2.Q: شرایط پرداخت شما چیست؟
A: سپرده 30% قبل از تولید، تعادل T/T قبل از تحویل.
3.Q: آیا شما یک شرکت تجاری یا تولید کننده هستید؟
الف: ما یک تولید کننده با تجهیزات پیشرفته و کارگران باتجربه هستیم.
4.Q:What’s your production capacity?
الف: 8000-9000 عدد در ماه
5.Q: نمونه رایگان موجود است یا خیر؟
A: بله، ما می توانیم نمونه رایگان را ارائه دهیم اگر مشتری موافقت کند که هزینه پیک را پرداخت کند
6.Q: آیا گواهی دارید؟
A: بله، ما گواهینامه CE و گزارش گواهینامه SGS داریم.
اطلاعات تماس:
خانم لینگل پن
برای هرگونه سوال، فقط کافیست با من تماس بگیرید. از توجه شما به شرکت ما بسیار سپاسگزاریم!
| کاربرد: | موتور، ماشین آلات، دریایی، ماشین آلات کشاورزی، صنعت |
|---|---|
| عملکرد: | توزیع توان، تغییر گشتاور محرک، تغییر سرعت، کاهش سرعت |
| طرح بندی: | زاویه قائمه |
| سختی: | سطح دندانه سخت شده |
| نصب: | نوع افقی |
| مرحله: | دو مرحلهای |
| نمونهها: | US$ 12/Piece ۱ قطعه (حداقل سفارش) | |
|---|
| سفارشی سازی: | موجود است | درخواست سفارشی |
|---|
Calculating Gear Ratio in a Worm Reducer
The gear ratio in a worm reducer is determined by the number of teeth on the worm wheel (also known as the worm gear) and the number of threads on the worm shaft. The gear ratio formula for a worm reducer is:
Gear Ratio = Number of Teeth on Worm Wheel / Number of Threads on Worm Shaft
For example, if the worm wheel has 60 teeth and the worm shaft has a single thread, the gear ratio would be 60:1.
It’s important to note that worm reducers have an inherent self-locking property due to the angle of the worm threads. As a result, the gear ratio also affects the mechanical advantage and the system’s ability to resist backdriving.
When calculating the gear ratio, ensure that the worm reducer is properly designed and that the gear ratio aligns with the desired mechanical characteristics for your application. Additionally, consider factors such as efficiency, load capacity, and speed limitations when selecting a gear ratio for a worm reducer.
Diagnosing and Fixing Oil Leakage in a Worm Gearbox
Oil leakage in a worm gearbox can lead to reduced lubrication, increased friction, and potential damage to the gearbox components. Here’s a step-by-step process to diagnose and fix oil leakage:
- Inspect the Gearbox: Perform a visual inspection of the gearbox to identify the source of the leakage. Check for oil stains, wet spots, or oil pooling around the gearbox.
- Check Seals and Gaskets: Inspect the seals, gaskets, and O-rings for any signs of wear, cracks, or damage. These components are common points of leakage.
- Tighten Bolts and Fasteners: Ensure that all bolts, screws, and fasteners are properly tightened. Loose fasteners can create gaps that allow oil to escape.
- Replace Damaged Seals: If you find damaged seals or gaskets, replace them with new ones. Use seals that are compatible with the operating conditions and lubricant.
- Check Breather Vent: A clogged or malfunctioning breather vent can cause pressure buildup inside the gearbox, leading to leakage. Clean or replace the breather vent if necessary.
- Examine Shaft Seals: Check the shaft seals for wear or damage. If they’re worn out, replace them with seals of the appropriate size and material.
- Use Proper Lubricant: Ensure that you’re using the correct lubricant recommended for the gearbox. Using the wrong type of lubricant can cause leaks.
- Apply Sealants: In some cases, applying a suitable sealant to the joints and connections can help prevent leaks. Follow the manufacturer’s instructions for proper application.
- Monitor Leakage: After addressing the issues, monitor the gearbox for any signs of continued leakage. If leakage persists, further investigation may be required.
- Regular Maintenance: Implement a regular maintenance schedule that includes checking seals, gaskets, and other potential leakage points. Timely maintenance can prevent future leakage issues.
If you’re unsure about diagnosing or fixing oil leakage in a worm gearbox, consider consulting with a professional or gearbox manufacturer to ensure proper resolution.
How to Select the Right Worm Gearbox for Your Application
Selecting the right worm gearbox for your application involves careful consideration of various factors:
- Load Requirements: Determine the torque and load requirements of your application to ensure the selected gearbox can handle the load without compromising performance.
- Speed Reduction: Calculate the required gear reduction ratio to achieve the desired output speed. Worm gearboxes are known for high reduction ratios.
- کارایی: Consider the gearbox’s efficiency, as worm gearboxes typically have lower efficiency due to the sliding action. Evaluate whether the efficiency meets your application’s needs.
- Space Constraints: Assess the available space for the gearbox. Worm gearboxes have a compact design, making them suitable for applications with limited space.
- Mounting Options: Determine the mounting orientation and configuration that best suits your application.
- Operating Environment: Consider factors such as temperature, humidity, and exposure to contaminants. Choose a gearbox with appropriate seals and materials to withstand the environment.
- واکنش معکوس: Evaluate the acceptable level of backlash in your application. Worm gearboxes may exhibit more backlash compared to other gear types.
- خود قفل شونده: If self-locking capability is required, confirm that the selected gearbox can prevent reverse motion without the need for external braking mechanisms.
- تعمیر و نگهداری: Consider the maintenance requirements of the gearbox. Some worm gearboxes require periodic lubrication and maintenance to ensure proper functioning.
- Cost: Balance the features and performance of the gearbox with the overall cost to ensure it aligns with your budget.
Consult with gearbox manufacturers or experts to get recommendations tailored to your specific application. Testing and simulations can also help validate the suitability of a particular gearbox for your needs.
editor by CX 2023-10-07