उत्पाद वर्णन
JWB Series Speed Variator
1. Features:
JWB-X type
- Sizes: ≥04
- Power up to 1.5 kW or more
- Cases in RAL 5571 blue cast iron
- Shafts: case hardened and tempered steel.
- Internal components: heat-treated steel
- Output speed with 4 pole(1400r/min) motors: 2-10r/min;4.7-23.5r/min;15-75r/min;20-100r/min, 28-140r/min, 30-150r/min;40-200r/min;60-300r/min;80-400r/min;100-500r/min;190-950r/min.
- Output Torque value max 1002Nm
- Silent, vibration-free running
- Bidirectional rotation
- Control handwheel positionable on either side
- Slipping speed to max load at 5%
- Regulation sensibility: 0,5 rpm
- Painted with blue epoxy-polyester powder
JWB-X B type
- Sizes:01,02,03 and 04
- Power up to 1.5 kW or less
- Cases in die-cast aluminium alloy
- Shafts: case hardened and tempered steel.
- Internal components: heat-treated steel
- Output speed with 4 pole(1400r/min) motors: 2r/min-20r/min;4.7r/min-23.5r/min;6.5-32.5r/min, 8-40r/min, 9-45r/min, 13-65r/min, 15r/min-75r/min;18-90r/min, 25-125r/min, 28r/min-140r/min;40r/min-200r/min;60r/min-300r/min;80r/min-400r/min;100r/min-500r/min;190r/min-950r/min.
- Output Torque value max 795 Nm
- Silent, vibration-free running
- Bidirectional rotation
- Control hand wheel positionable on either side
- Slipping speed to max load at 5%
- Regulation sensibility: 0,5 rpm
- Painted with blue epoxy-polyester powder
2. Technical parameters
| Type | Output Torque | Output Shaft Dia. | Output Speed Range | 2rpm-950rpm | |
| SWB01 | 2.6-1.6N.m | φ11 | Applicable Motor Power | 0.18kW-7.5kW | |
| SWB02 | 258-1.8N.m | φ14,φ24,φ28,φ32 | |||
| SWB03 | 426-4N.m | φ24,φ28,φ38 | Input Options | With Inline AC Motor | |
| SWB04 | 795-8N.m | φ28,φ38,φ42 | With IEC Motor | ||
| SWB05 | 535-16N.m | φ38,φ48,φ55 | With Input Shaft | ||
| SWB06 | 1002-40N.m | φ42,φ55,φ70 | With Input Flange | ||
हमारे बारे में
ZheJiang CHINAMFG Drive Co.,Ltd,the predecessor was a state-owned military mould enterprise, was established in 1965. CHINAMFG specializes in the complete power transmission solution for high-end equipment manufacturing industries based on the aim of “Platform Product, Application Design and Professional Service”.
Starshine have a strong technical force with over 350 employees at present, including over 30 engineering technicians, 30 quality inspectors, covering an area of 80000 square CHINAMFG and kinds of advanced processing machines and testing equipments. We have a good foundation for the industry application development and service of high-end speed reducers & variators owning to the provincial engineering technology research center,the lab of gear speed reducers, and the base of modern R&D.
Our Team
Quality Control
Quality:Insist on Improvement,Strive for Excellence With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission
Quality View:Continuous Improvement , pursuit of excellence
Quality Philosophy:Quality creates value
3. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective
measures to prevent recurrence.
4. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend;
found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state.
5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of
customer expectations and needs.
6. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the
product is a product inspection to determine the qualified products.
7. Certification.
Packing
Delivery
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Machinery, Agricultural Machinery, Ceramic |
|---|---|
| कठोरता: | कठोर दांत की सतह |
| स्थापना: | Vertical or Horizotal Type |
| लेआउट: | समाक्षीय |
| गियर का आकार: | Worm Gearbox |
| कदम: | Single-Step |
| अनुकूलन: | उपलब्ध | अनुकूलित अनुरोध |
|---|
वर्म रिड्यूसर को सही तरीके से कैसे स्थापित और संरेखित करें
वर्म रिड्यूसर की इष्टतम कार्यक्षमता और दीर्घायु सुनिश्चित करने के लिए उसका सही इंस्टॉलेशन और अलाइनमेंट अत्यंत महत्वपूर्ण है। वर्म रिड्यूसर को इंस्टॉल और अलाइन करने के लिए इन चरणों का पालन करें:
- तैयारी: स्थापना प्रक्रिया शुरू करने से पहले सभी आवश्यक उपकरण, सामग्री और सुरक्षा उपकरण एकत्र कर लें।
- स्थिति निर्धारण: वर्म रिड्यूसर को इच्छित स्थान पर रखें और सुनिश्चित करें कि यह एक स्थिर सतह पर मजबूती से लगा हुआ है। आवश्यकतानुसार उपयुक्त फास्टनर और माउंटिंग ब्रैकेट का उपयोग करें।
- शाफ्ट संरेखण: इनपुट और आउटपुट शाफ्टों की संरेखण की जाँच करें। यह सुनिश्चित करने के लिए सटीक माप उपकरणों का उपयोग करें कि शाफ्ट समानांतर और एक दूसरे के साथ सीधी रेखा में हैं।
- बेस प्लेट संरेखण: रिड्यूसर की बेस प्लेट को नींव या माउंटिंग सतह के साथ संरेखित करें। इसे लगाने से पहले सुनिश्चित करें कि बेस प्लेट समतल और सही ढंग से संरेखित है।
- बोल्ट कसना: निर्माता के निर्देशों के अनुसार माउंटिंग बोल्ट को धीरे-धीरे और समान रूप से कसें। इससे रिड्यूसर और माउंटिंग सतह के बीच उचित संपर्क सुनिश्चित होता है।
- मंजूरी की जांच करें: सुनिश्चित करें कि संचालन के दौरान घूमने वाले किसी भी पुर्जे या घटक के लिए पर्याप्त जगह हो। किसी भी प्रकार की रुकावट से बचें जिससे क्षति या प्रदर्शन संबंधी समस्याएँ उत्पन्न हो सकती हैं।
- स्नेहन: निर्माता के निर्देशों के अनुसार वर्म रिड्यूसर पर अनुशंसित लुब्रिकेंट लगाएं। सुचारू संचालन और घर्षण को कम करने के लिए उचित लुब्रिकेशन आवश्यक है।
- संरेखण परीक्षण: स्थापना के बाद, किसी भी असामान्य शोर, कंपन या संरेखण संबंधी समस्याओं की जांच करने के लिए वर्म रिड्यूसर को बिना लोड के थोड़ी देर के लिए चलाएं।
- लोड टेस्टिंग: वर्म रिड्यूसर पर धीरे-धीरे इच्छित भार डालें और इसके प्रदर्शन की निगरानी करें। सुनिश्चित करें कि रिड्यूसर भार की स्थिति में सुचारू रूप से और कुशलतापूर्वक कार्य करता है।
अपने वर्म रिड्यूसर मॉडल के लिए निर्माता के इंस्टॉलेशन दिशानिर्देशों और विशिष्टताओं को देखना महत्वपूर्ण है। सही इंस्टॉलेशन और अलाइनमेंट गियरबॉक्स की विश्वसनीयता, दक्षता और समग्र कार्यक्षमता में योगदान देगा।
Diagnosing and Fixing Oil Leakage in a Worm Gearbox
Oil leakage in a worm gearbox can lead to reduced lubrication, increased friction, and potential damage to the gearbox components. Here’s a step-by-step process to diagnose and fix oil leakage:
- Inspect the Gearbox: Perform a visual inspection of the gearbox to identify the source of the leakage. Check for oil stains, wet spots, or oil pooling around the gearbox.
- Check Seals and Gaskets: Inspect the seals, gaskets, and O-rings for any signs of wear, cracks, or damage. These components are common points of leakage.
- Tighten Bolts and Fasteners: Ensure that all bolts, screws, and fasteners are properly tightened. Loose fasteners can create gaps that allow oil to escape.
- Replace Damaged Seals: If you find damaged seals or gaskets, replace them with new ones. Use seals that are compatible with the operating conditions and lubricant.
- Check Breather Vent: A clogged or malfunctioning breather vent can cause pressure buildup inside the gearbox, leading to leakage. Clean or replace the breather vent if necessary.
- Examine Shaft Seals: Check the shaft seals for wear or damage. If they’re worn out, replace them with seals of the appropriate size and material.
- Use Proper Lubricant: Ensure that you’re using the correct lubricant recommended for the gearbox. Using the wrong type of lubricant can cause leaks.
- Apply Sealants: In some cases, applying a suitable sealant to the joints and connections can help prevent leaks. Follow the manufacturer’s instructions for proper application.
- Monitor Leakage: After addressing the issues, monitor the gearbox for any signs of continued leakage. If leakage persists, further investigation may be required.
- Regular Maintenance: Implement a regular maintenance schedule that includes checking seals, gaskets, and other potential leakage points. Timely maintenance can prevent future leakage issues.
If you’re unsure about diagnosing or fixing oil leakage in a worm gearbox, consider consulting with a professional or gearbox manufacturer to ensure proper resolution.
How Does a Worm Gearbox Compare to Other Types of Gearboxes?
Worm gearboxes offer unique advantages and characteristics that set them apart from other types of gearboxes. Here’s a comparison between worm gearboxes and some other common types:
- Helical Gearbox: Worm gearboxes have higher torque multiplication, making them suitable for heavy-load applications, while helical gearboxes are more efficient and offer smoother operation.
- Bevel Gearbox: Worm gearboxes are compact and can transmit motion at right angles, similar to bevel gearboxes, but worm gearboxes have self-locking capabilities.
- Planetary Gearbox: Worm gearboxes provide high torque output and are cost-effective for applications with high reduction ratios, whereas planetary gearboxes offer higher efficiency and can handle higher input speeds.
- Spur Gearbox: Worm gearboxes have better shock load resistance due to their sliding motion, while spur gearboxes are more efficient and suitable for lower torque applications.
- Cycloidal Gearbox: Cycloidal gearboxes have high shock load capacity and compact design, but worm gearboxes are more cost-effective and can handle higher reduction ratios.
While worm gearboxes have advantages such as high torque output, compact design, and self-locking capability, the choice between gearbox types depends on the specific requirements of the application, including torque, efficiency, speed, and space limitations.
editor by CX 2024-04-16