Deskripsi Produk
Coresun Drive slewing drive gear motor worm drive for horizontal single-axis solar tracking system. For horizontal single-axis solar tracking system, the main shaft of solar panel will adjust the angle to precisely track the declination angle. This kind of slewing drive is only applied for low latitudes area.
Slew Drive is a new type of slewing product, usually called slewing ring, which is usually composed of worm, slewing ring, housing, motor and other components. Since the core components are slewing bearings, they can simultaneously withstand axial forces, radial forces, and overturning moments. Compared with traditional rotary products, the new slewing drive features easy installation, easy maintenance and a greater degree of installation space.
Slew Drive are widely used in PV,CPV,STP solar tracking systems and construction applications including truck cranes, manlifts, turntables, port machinery, modular vehicles, small wind power systems and satellite communications.
Glossary
Tilting Moment Torque: Torque is the load multiplied by distance between the position of load and the center of slewing bearing. If the qorque generated by load and distance is greater than the rated tilting moment torque, slewing drive will be overturned.
Radial load: Load vertical to the axis of slewing bearing
Axial load: Load parallel to the axis of slewing bearing
Holding torque:It is the reverse torque.When the drive is rotating reversely, and parts are not damaged,The maximum torque achieved is called holding torque.
Self-locking: Only when loaded, the slewing drive is not able to reverse rotate and thus called self-loc
| Model | VH9 | Place of Origin | HangZhou,China |
| Brand | Coresun Drive | Jenis | Vertical |
| Bahan | 42CrMo,50Mn | Torsi Keluaran | 6405N.m |
| Tilting Moment Torque | 12KN.m | Holding Torque | 56KN.m |
| Static Axial Rating | 350KN | Static Radial Rating | 120KN |
| Dynamic Axial Rating | 168KN | Dynamic Radial Rating | 65KN |
| Rasio Gigi | 61:1 | Efisiensi | 40% |
Tentang Kami
CHINAMFG – Practical Slewing Drive & Slewing Bearing Promoter.
We are committed to researching, developing and applying high quality, precision transmission equipment products,who provides reliable mechanical actuator for horizonal single axis, dual-axis photovoltaic tracking system, CSP,CPV solar tracking design.Our professional and high-quality products will be also applied well as a steady solution on aerial working platform, truck crane, timber grab, drilling rig, spray equipment, hydraulic module vehicle,automated assembly lines, wind yaw systems,etc.
1. Our company’s worm gear reducer (slewing drive device) adopts the transmission mode of plane secondary enveloping ring surface worm combined with slewing support, which can realize multi-tooth meshing.
2. On the premise of not affecting the performance of the whole device, we improved and optimized it, and its overall thickness became thinner and weight became lighter.
3. The rotary device at the center is a through hole for the customer to use. The original product is solid.
4. The worm material is 42CrMo, the secondary nitride treatment, the slewing bearing material is 50Mn, the teeth are quenched, and its wear resistance is good.
Why choose us
1. We are a manufacturer of producing slewing drive and bearing for more than 10 years.
2. We have advanced mechanical equipment and strict quality control team.
3. Efficient production speed and on-time delivery service.
4. Accept standard and non-standard production.
Products Photo
Application
Photovoltaic power generation is an important application field of rotary drive, using slewing drive VH9 as a rotating component of solar photovoltaic modules, according to the position of the sun in a day to the host of the angle and elevation of accurate adjustment, time is the solar panel for better reception angle, can make greater efficiency of power generation.
Horizontal Single Axis PV solar tracker system. The slewing drive VH9 is available for 60-150 square meter solar tracker design.
Products Certificate
Coresun Drive slewing drive gear motor have arroved by CE and ISO2001 certificate.
CONTACT US
It is sincerely looking CHINAMFG to cooperating with you for and providing you the best quality product & service with all of our heart!
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Feature: | Corrosion-Resistant |
|---|---|
| Melangkah: | Langkah Ganda |
| Openness: | Closed |
| Instalasi: | Vertical |
| Transmission Form: | Cacing |
| Jenis: | Single-Row Ball |
| Kustomisasi: | Tersedia | Permintaan Khusus |
|---|
Tips Perawatan untuk Memperpanjang Umur Pakai Gearbox Cacing
Perawatan yang tepat sangat penting untuk memastikan umur panjang dan kinerja yang andal dari gearbox cacing. Berikut beberapa tips perawatan yang perlu dipertimbangkan:
- Pelumasan: Periksa dan tambahkan pelumas pada gearbox secara berkala. Gunakan jenis dan jumlah pelumas yang direkomendasikan oleh pabrikan.
- Jadwal Pelumasan: Ikuti jadwal pelumasan berdasarkan kondisi pengoperasian dan rekomendasi pabrikan. Pelumasan secara teratur mencegah gesekan, mengurangi keausan, dan menghilangkan panas.
- Pemantauan Suhu: Perhatikan suhu operasional gearbox. Panas berlebih dapat merusak pelumas dan komponen.
- Kebersihan: Jaga kebersihan gearbox dan area sekitarnya dari kotoran dan kontaminan. Periksa dan bersihkan bagian luar gearbox secara teratur.
- Inspeksi Segel: Periksa apakah ada kebocoran atau kerusakan pada segel dan gasket. Segera ganti untuk mencegah kebocoran pelumas dan kontaminasi.
- Penyelarasan: Pastikan penyelarasan yang tepat antara ulir cacing dan roda gigi cacing. Ketidakselarasan dapat menyebabkan peningkatan keausan dan penurunan efisiensi.
- Pemantauan Torsi: Pantau tingkat torsi selama pengoperasian. Torsi yang berlebihan dapat menyebabkan beban berlebih dan keausan dini.
- Inspeksi Rutin: Periksa semua komponen secara berkala untuk mengetahui tanda-tanda keausan, kerusakan, atau suara yang tidak biasa. Segera ganti komponen yang aus atau rusak.
- Cara Penggunaan yang Tepat: Operasikan gearbox sesuai dengan batas yang ditentukan, termasuk beban, kecepatan, dan suhu. Hindari kelebihan beban atau perubahan mendadak pada kondisi pengoperasian.
- Perawatan Ahli: If major maintenance or repairs are needed, consult the manufacturer’s guidelines or seek the assistance of qualified technicians.
By following these maintenance tips and adhering to the manufacturer’s recommendations, you can extend the lifespan of your worm gearbox and ensure its optimal performance over time.
Apakah Reduksi Cacing Membutuhkan Perawatan Rutin?
Reducer cacing umumnya membutuhkan perawatan yang lebih jarang dibandingkan dengan beberapa jenis gearbox lainnya karena desain dan karakteristik operasinya. Namun, perawatan tetap penting untuk memastikan kinerja optimal dan umur pakai yang panjang. Berikut beberapa poin penting yang perlu dipertimbangkan:
- Pelumasan: Pelumasan yang tepat sangat penting untuk gearbox cacing. Periksa level dan kualitas pelumas secara teratur untuk mencegah keausan dan panas berlebih. Pelumas harus diganti sesuai rekomendasi pabrikan.
- Inspeksi: Periksa gearbox secara berkala untuk melihat tanda-tanda keausan, kerusakan, atau kebocoran oli. Periksa apakah ada suara, getaran, atau perubahan kinerja yang tidak biasa yang dapat mengindikasikan adanya masalah.
- Pengencangan dan Penyelarasan: Periksa dan kencangkan semua baut yang longgar dan pastikan gearbox terpasang dengan benar. Ketidaksejajaran dapat menyebabkan peningkatan keausan dan penurunan efisiensi.
- Perawatan Segel: Periksa dan rawat seal untuk mencegah kebocoran oli dan masuknya kontaminan ke dalam gearbox.
- Pembersihan: Jaga kebersihan gearbox dari kotoran dan kontaminan yang dapat memengaruhi kinerjanya. Pembersihan rutin dapat mencegah keausan dan kerusakan dini.
- Beban dan Kecepatan: Pastikan gearbox beroperasi sesuai dengan batas beban dan kecepatan yang ditentukan. Melebihi batas ini dapat menyebabkan keausan yang lebih cepat dan potensi kerusakan.
- Kondisi Lingkungan: Consider the operating environment of the gearbox. Extreme temperatures, humidity, and other factors can impact the gearbox’s performance and longevity.
While worm gearboxes are known for their durability and self-locking feature, neglecting maintenance can lead to premature wear, reduced efficiency, and potential breakdowns. Following the manufacturer’s recommendations for maintenance intervals and procedures is essential to keep the worm reducer in optimal condition.
Lubrication Requirements for a Worm Gearbox
Lubrication is crucial for maintaining the performance and longevity of a worm gearbox. Here are the key considerations for lubricating a worm gearbox:
- Type of Lubricant: Use a high-quality, high-viscosity lubricant specifically designed for worm gearboxes. Worm gearboxes require lubricants with additives that provide proper lubrication and prevent wear.
- Lubrication Interval: Follow the manufacturer’s recommendations for lubrication intervals. Regularly check the gearbox’s temperature and oil condition to determine the optimal frequency of lubrication.
- Oil Level: Maintain the proper oil level to ensure effective lubrication. Too little oil can lead to insufficient lubrication, while too much oil can cause overheating and foaming.
- Lubrication Points: Identify all the lubrication points on the gearbox, including the worm and wheel gear surfaces. Apply the lubricant evenly to ensure complete coverage.
- Temperature: Consider the operating temperature of the gearbox. Some lubricants have temperature limits, and extreme temperatures can affect lubricant viscosity and performance.
- Kebersihan: Keep the gearbox and the surrounding area clean to prevent contaminants from entering the lubricant. Use proper filtration and seals to maintain a clean environment.
- Monitoring: Regularly monitor the gearbox’s temperature, noise level, and vibration to detect any signs of inadequate lubrication or other issues.
Proper lubrication will reduce friction, wear, and heat generation, ensuring smooth and efficient operation of the worm gearbox. Always refer to the manufacturer’s guidelines for lubrication specifications and intervals.
editor by CX 2024-03-09