Descrizione del prodotto
Descrizione del prodotto
Main Materials:
1)housing:aluminium alloy ADC12(size 571-090); die cast iron HT200(size 110-150);
2)Worm:20Cr, ZI Involute profile; carbonize&quencher heat treatment make gear surface hardness up to 56-62 HRC; After precision grinding, carburization layer’s thickness between 0.3-0.5mm.
3)Worm Wheel:wearable stannum alloy CuSn10-1
Foto dettagliate
Combination Options:
Input:with input shaft, With square flange,With IEC standard input flange
Output:with torque arm, output flange, single output shaft, double output shaft, plastic cover
Worm reducers are available with diffferent combinations: NMRV+NMRV, NMRV+NRV, NMRV+PC, NMRV+UDL, NMRV+MOTORS
Exploded View:
Parametri del prodotto
| Old Model | New Model | Rapporto | Center Distance | Power | Input Dia. | Output Dia. | Coppia in uscita | Weight |
| RV571 | 7.5~100 | 25mm | 0.06KW~0.12KW | Φ9 | Φ11 | 21N.m | 0.7kgs | |
| RV030 | RW030 | 7.5~100 | 30mm | 0.06KW~0.25KW | Φ9(Φ11) | Φ14 | 45N.m | 1.2kgs |
| RV040 | RW040 | 7.5~100 | 40mm | 0.09KW~0.55KW | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84N.m | 2.3kgs |
| RV050 | RW050 | 7.5~100 | 50mm | 0.12KW~1.5KW | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160N.m | 3.5kgs |
| RV063 | RW063 | 7.5~100 | 63mm | 0.18KW~2.2KW | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230N.m | 6.2kgs |
| RV075 | RW075 | 7.5~100 | 75mm | 0.25KW~4.0KW | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410N.m | 9.0kgs |
| RV090 | RW090 | 7.5~100 | 90mm | 0.37KW~4.0KW | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725N.m | 13.0kgs |
| RV110 | RW110 | 7.5~100 | 110mm | 0.55KW~7.5KW | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050N.m | 35.0kgs |
| RV130 | RW130 | 7.5~100 | 130mm | 0.75KW~7.5KW | Φ24(Φ28,Φ38) | Φ45 | 1550N.m | 48.0kgs |
| RV150 | RW150 | 7.5~100 | 150mm | 2.2KW~15KW | Φ28(Φ38,Φ42) | Φ50 | 84.0kgs |
GMRV Outline Dimension:
| GMRV | A | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | I | M | N | O | P | Q | R | S | T | BL | β | b | t | V |
| 030 | 80 | 97 | 54 | 44 | 14 | 55 | 32 | 56 | 63 | 65 | 29 | 55 | 40 | 57 | 30 | 75 | 44 | 6.5 | 21 | 5.5 | M6*10(n=4) | 0° | 5 | 16.3 | 27 |
| 040 | 100 | 121.5 | 70 | 60 | 18(19) | 60 | 43 | 71 | 78 | 75 | 36.5 | 70 | 50 | 71.5 | 40 | 87 | 55 | 6.5 | 26 | 6.5 | M6*10(n=4) | 45° | 6 | 20.8(21.8) | 35 |
| 050 | 120 | 144 | 80 | 70 | 25(24) | 70 | 49 | 85 | 92 | 85 | 43.5 | 80 | 60 | 84 | 50 | 100 | 64 | 8.5 | 30 | 7 | M8*12(n=4) | 45° | 8 | 28.3(27.3) | 40 |
| 063 | 144 | 174 | 100 | 85 | 25(28) | 80 | 67 | 103 | 112 | 95 | 53 | 95 | 72 | 102 | 63 | 110 | 80 | 8.5 | 36 | 8 | M8*12(n=8) | 45° | 8 | 28.3(31.3) | 50 |
| 075 | 172 | 205 | 120 | 90 | 28(35) | 95 | 72 | 112 | 120 | 115 | 57 | 112.5 | 86 | 119 | 75 | 140 | 93 | 11 | 40 | 10 | M8*14(n=8) | 45° | 8(10) | 31.3(38.3) | 60 |
| 090 | 206 | 238 | 140 | 100 | 35(38) | 110 | 74 | 130 | 140 | 130 | 67 | 129.5 | 103 | 135 | 90 | 160 | 102 | 13 | 45 | 11 | M10*16(n=8) | 45° | 10 | 38.3(41.3) | 70 |
| 110 | 255 | 295 | 170 | 115 | 42 | 130 | – | 144 | 155 | 165 | 74 | 160 | 127.5 | 167.5 | 110 | 200 | 125 | 14 | 50 | 14 | M10*18(n=8) | 45° | 12 | 45.3 | 85 |
| 130 | 293 | 335 | 200 | 120 | 45 | 180 | – | 155 | 170 | 215 | 81 | 179 | 146.5 | 187.5 | 130 | 250 | 140 | 16 | 60 | 15 | M12*20(n=8) | 45° | 14 | 48.8 | 100 |
| 150 | 340 | 400 | 240 | 145 | 50 | 180 | – | 185 | 200 | 215 | 96 | 210 | 170 | 230 | 150 | 250 | 180 | 18 | 72.5 | 18 | M12*22(n=8) | 45° | 14 | 53.8 | 120 |
Profilo Aziendale
About CHINAMFG Transmission:
We are a professional reducer manufacturer located in HangZhou, ZHangZhoug province.
Our leading products is full range of RV571-150 worm reducers , also supplied GKM hypoid helical gearbox, GRC inline helical gearbox, PC units, UDL Variators and AC Motors, G3 helical gear motor.
Products are widely used for applications such as: foodstuffs, ceramics, packing, chemicals, pharmacy, plastics, paper-making, construction machinery, metallurgic mine, environmental protection engineering, and all kinds of automatic lines, and assembly lines.
With fast delivery, superior after-sales service, advanced producing facility, our products sell well both at home and abroad. We have exported our reducers to Southeast Asia, Eastern Europe and Middle East and so on.Our aim is to develop and innovate on basis of high quality, and create a good reputation for reducers.
Packing information:Plastic Bags+Cartons+Wooden Cases , or on request
We participate Germany Hannver Exhibition-ZheJiang PTC Fair-Turkey Win Eurasia
Logistics
After Sales Service
1.Maintenance Time and Warranty:Within 1 year after receiving goods.
2.Other Service: Including modeling selection guide, installation guide, and problem resolution guide, etc.
FAQ
1.Q:Can you make as per customer drawing?
A: Yes, we offer customized service for customers accordingly. We can use customer’s nameplate for gearboxes.
2.Q:What is your terms of payment ?
A: 30% deposit before production,balance T/T before delivery.
3.Q:Are you a trading company or manufacturer?
A:We are a manufacurer with advanced equipment and experienced workers.
4.Q:What’s your production capacity?
A:8000-9000 PCS/MONTH
5.Q:Free sample is available or not?
A:Yes, we can supply free sample if customer agree to pay for the courier cost
6.Q:Do you have any certificate?
A:Yes, we have CE certificate and SGS certificate report.
Contact information:
Ms Lingel Pan
For any questions just feel free ton contact me. Many thanks for your kind attention to our company!
| Applicazione: | Motor, Machinery, Marine, Agricultural Machinery, Industry |
|---|---|
| Durezza: | Superficie del dente indurita |
| Installazione: | Tipo orizzontale |
| Disposizione: | Right Angle |
| Forma dell'ingranaggio: | Worm Gear |
| Fare un passo: | Doppio passo |
| Esempi: | US$ 30/Piece 1 pezzo (ordine minimo) | |
|---|
| Personalizzazione: | Disponibile | Richiesta personalizzata |
|---|
Maintenance Tips for Prolonging the Life of a Worm Gearbox
Proper maintenance is essential to ensure the longevity and reliable performance of a worm gearbox. Here are some maintenance tips to consider:
- Lubrificazione: Regularly check and replenish the lubricant in the gearbox. Use the recommended lubricant type and quantity specified by the manufacturer.
- Lubrication Schedule: Follow a lubrication schedule based on the operating conditions and manufacturer recommendations. Regular lubrication prevents friction, reduces wear, and dissipates heat.
- Temperature Monitoring: Keep an eye on the operating temperature of the gearbox. Excessive heat can degrade the lubricant and damage components.
- Cleanliness: Keep the gearbox and surrounding area clean from debris and contaminants. Regularly inspect and clean the gearbox exterior.
- Seal Inspection: Check for any leaks or damage to seals and gaskets. Replace them promptly to prevent lubricant leaks and contamination.
- Alignment: Ensure proper alignment between the worm and worm wheel. Misalignment can lead to increased wear and reduced efficiency.
- Torque Monitoring: Monitor the torque levels during operation. Excessive torque can cause overloading and premature wear.
- Regular Inspections: Periodically inspect all components for signs of wear, damage, or unusual noise. Replace worn or damaged parts promptly.
- Proper Usage: Operate the gearbox within its specified limits, including load, speed, and temperature. Avoid overloading or sudden changes in operating conditions.
- Expert Maintenance: If major maintenance or repairs are needed, consult the manufacturer’s guidelines or seek the assistance of qualified technicians.
By following these maintenance tips and adhering to the manufacturer’s recommendations, you can extend the lifespan of your worm gearbox and ensure its optimal performance over time.
Applicazioni dei riduttori a vite senza fine nella robotica e nell'automazione
I riduttori a vite senza fine svolgono un ruolo cruciale in diverse applicazioni di robotica e automazione grazie alle loro caratteristiche e ai loro vantaggi unici. Ecco alcune applicazioni comuni in cui vengono utilizzati i riduttori a vite senza fine:
- Movimento del braccio robotico: Worm gearboxes are employed in robotic arms to provide precise and controlled movement. The self-locking property of worm gearboxes helps maintain the arm’s position without requiring additional brakes.
- Sistemi di trasporto: Nelle linee di produzione automatizzate, i riduttori a vite senza fine vengono utilizzati per azionare i nastri trasportatori e spostare materiali o prodotti lungo le linee di assemblaggio con precisione.
- Posizionamento di precisione: I riduttori a vite senza fine sono utilizzati nei sistemi di posizionamento di precisione, come quelli presenti nei robot di prelievo e posizionamento e nelle macchine CNC. Garantiscono movimenti accurati e ripetibili.
- Meccanismi di panoramica e inclinazione: I riduttori a vite senza fine sono utilizzati nei meccanismi di panoramica e inclinazione di telecamere di sorveglianza, telecamere robotizzate e sensori. La funzione di autobloccaggio contribuisce a stabilizzare e mantenere l'angolazione desiderata.
- Cancelli e porte automatizzati: I riduttori a vite senza fine vengono utilizzati nei sistemi automatizzati di cancelli e porte per controllarne i movimenti di apertura e chiusura in modo fluido e sicuro.
- Movimentazione dei materiali: Nei magazzini e nei centri di distribuzione, i robot utilizzano riduttori a vite senza fine per manipolare e sollevare oggetti, migliorando l'efficienza nella movimentazione dei materiali.
- Robotica medica: I riduttori a vite senza fine sono impiegati nei robot medicali per procedure chirurgiche, apparecchiature diagnostiche e dispositivi di riabilitazione, garantendo movimenti precisi e controllati.
- Robot industriali: I robot industriali si affidano a riduttori a vite senza fine per svolgere diverse attività, tra cui saldatura, verniciatura, assemblaggio e confezionamento, dove i movimenti precisi sono essenziali.
- Apparecchiature di collaudo automatizzate: Nelle applicazioni di collaudo e ispezione, i riduttori a vite senza fine forniscono il movimento e il posizionamento necessari per test e misurazioni accurati.
- Industria alimentare e delle bevande: I riduttori a vite senza fine vengono utilizzati nei sistemi automatizzati di lavorazione e confezionamento degli alimenti, garantendo un movimento igienico e preciso dei prodotti.
In queste applicazioni, i riduttori a vite senza fine sono preferiti per le loro dimensioni compatte, l'elevata coppia erogata, la funzione di autobloccaggio e la capacità di fornire una trasmissione ad angolo retto. Tuttavia, la scelta del riduttore più adatto richiede la considerazione di fattori quali carico, velocità, efficienza e condizioni ambientali.
Prevenire il gioco in un riduttore a vite senza fine
Il gioco in un riduttore a vite senza fine può causare una riduzione della precisione, errori di posizionamento e una diminuzione dell'efficienza complessiva. Ecco alcuni passaggi per prevenire o ridurre al minimo il gioco:
- Componenti di alta qualità: Utilizzate ingranaggi e ruote elicoidali di alta qualità con tolleranze di fabbricazione ristrette. I componenti di precisione contribuiranno a ridurre il gioco.
- Corretta creazione della mesh: Assicurarsi che la vite senza fine e la ruota elicoidale siano correttamente allineate e ingranate. Un ingranamento errato può causare un aumento del gioco.
- Precaricato: Applicare un piccolo precarico alla vite senza fine può contribuire a ridurre il gioco. Tuttavia, un precarico eccessivo può aumentare l'attrito e l'usura.
- Meccanismi anti-contraccolpo: Valutare l'utilizzo di meccanismi anti-gioco, come sistemi a molla o spessori regolabili, per compensare eventuali giochi intrinseci.
- Lubrificazione: Una lubrificazione adeguata può ridurre l'attrito e contribuire a minimizzare il gioco. Utilizzare un lubrificante che garantisca una buona resistenza del film lubrificante e riduca l'usura.
- Manutenzione: Ispezionare e sottoporre a regolare manutenzione il riduttore per identificare e correggere eventuali variazioni del gioco nel tempo.
It’s important to strike a balance between reducing backlash and maintaining smooth operation. Consulting with gearbox experts and following manufacturer guidelines will help you optimize your worm gearbox’s performance while minimizing backlash.
editor by CX 2023-09-27