The Australian food processing and packaging industry operates under some of the world’s strictest hygiene regulations. Film wrapping machines — producing shrink-wrapped meat trays, stretch-wrapped produce, and sealed beverage multipacks — require drive systems that combine quiet operation, smooth motion, and wash-down compatibility. A stainless steel ウォームギアボックス meets every one of these requirements, delivering whisper-quiet power transmission in a fully sealed enclosure rated for high-pressure sanitary washdown.
Film wrapping machines operate at high speed with precise tension control. Heat-shrink tunnels, stretch-wrap turntables, and flow-wrap sealers all require motors to drive rollers, conveyors, and sealing bars at accurately controlled speeds. The worm gear reducer converts the motor output to the correct roller or conveyor speed, with the inherently smooth torque delivery preventing film stretch marks, wrinkling, or seal misalignment.
In food processing environments, the worm gearbox must withstand daily high-pressure, high-temperature washdown using caustic cleaning chemicals. Standard painted cast iron housings corrode rapidly under these conditions. Stainless steel worm gearboxes with IP69K ratings are specifically designed for the food industry, withstanding 80°C water jets at 100 bar pressure without moisture ingress.
The right-angle compact configuration of worm gear units is perfectly suited to the tight packaging line layouts where floor space is at a premium. A worm reducer mounts directly beneath a conveyor section or beside a wrapping mandrel, occupying far less space than an inline helical gearbox with equivalent reduction ratio.
Worm shafts are stainless steel 304/316 rated for acid and alkaline cleaning agents. Food-grade phosphor bronze or POM (polyoxymethylene) worm wheels provide safe, low-friction contact. Stainless steel housings carry IP69K high-pressure washdown certification, meeting the most demanding food safety requirements.
| パラメータ | 仕様 |
|---|---|
| ギア比範囲 | 5:1 – 50:1 |
| 出力トルク範囲 | 20 – 800 Nm |
| 入力軸径 | Ø 9 mm – Ø 28 mm |
| 出力軸径 | Ø 14 mm – Ø 50 mm |
| ハウジング材 | Stainless Steel 304/316, IP69K |
| 取り付けオプション | 脚部取り付け／フランジ取り付け／シャフト取り付け |
Packaging line speeds define the required output shaft speed and torque. Apply a サービス係数（SF） of 1.25 for steady film transport and 1.5 for machines with frequent start-stop indexing. In food environments, food-grade synthetic lubricant (NSF H1 registered) is mandatory to eliminate contamination risk. Select stainless steel 316 construction for lines processing acidic products (tomato, citrus) where chemical exposure is more aggressive. The noise level specification is critical in food packaging halls where workers operate in close proximity — worm gears typically produce 55–65 dB(A) at 1 m, well below regulatory limits.
ISO 9001:2015 — Quality management system certified across all manufacturing and assembly processes.
CE認証 — Full compliance with European Machinery Directive 2006/42/EC for global market access.
IEC規格インターフェース — Motor input flanges and shaft dimensions conform to IEC 60072 汎用モーターとの互換性を確保。
NEMA規格オプション — NEMA C面 また、北米向けモーター統合用のフットマウント構成も利用可能です。
IP65 / IP66 保護等級 — Ingress protection rated for complete dust exclusion and resistance to powerful water jets, ensuring reliable operation in harsh outdoor and industrial environments.
🍰 Meat Processing – Queensland
Equipment: Tray Shrink-Wrap Line (200 trays/min)
チャレンジ： Helical gearbox noise exceeded 78 dB(A), violating workplace noise regulations and requiring staff to wear hearing protection in the wrapping area.
解決： Stainless steel worm reducer operating at 58 dB(A). Sliding worm-wheel contact generates far less noise than meshing helical teeth.
結果： Hearing protection requirement removed for wrapping area; worker satisfaction survey scores improved significantly.
🍓 Fresh Produce Packing – South Australia
Equipment: Flow-Wrap Machine (Lettuce)
チャレンジ： Painted gearbox housing corroded after 4 months of daily caustic washdown, requiring replacement 3 times per year.
解決： Stainless steel 316 worm gearbox with IP69K rating designed specifically for high-pressure sanitary washdown environments.
結果： Gearbox has operated for 3 years without corrosion or seal failure; replacement cycle eliminated entirely.
🍾 Beverage Packaging – Victoria
Equipment: Multipack Stretch-Wrapper
チャレンジ： Inconsistent film tension from belt-drive system caused loose wraps that fell apart during pallet stacking.
解決： Positive-drive worm gearbox eliminated belt slip, providing constant output speed and consistent film tension.
結果： Wrap quality defects reduced by 92%; customer returns for damaged multipacks dropped to near zero.
業界経験
Over 20 years of worm gearbox manufacturing expertise serving the food & packaging sector and dozens of other industries worldwide.
リモートテクニカルサポート
オーストラリア全タイムゾーンに対応し、ビデオ通話、メール、電話によるリモートトラブルシューティング、CADモデルの提供、アプリケーションに関するコンサルティングを行う専任エンジニアリングチームが待機しています。
OEM/ODMカスタムデザイン
カスタムシャフト構成、特殊な取り付けブラケット、変更されたギア比、特注のハウジング材料など、用途に応じた厳密な要件を満たすための、完全な非標準設計能力を備えています。
抜群の価値
中間業者を介さない工場直販価格。プロジェクトベースの調達向けに、柔軟な最小発注数量（MOQ）とボリュームディスカウントプログラムをご用意しています。
グローバルロジスティクス
オーストラリアの主要港すべてへの確立された輸送ルートがあり、シドニーとメルボルンには保税倉庫のオプションがあり、迅速な国内配送が可能です。
Yes. Stainless steel 304/316 worm gearboxes with food-grade NSF H1 lubricant are specifically designed for food processing environments and comply with HACCP requirements for equipment used in food-contact areas.
IP69K is the gold standard for food processing equipment that undergoes high-pressure, high-temperature (80°C) sanitary washdown. IP65 is the minimum for dry food packaging areas not subject to washdown.
Worm gearboxes typically operate 10–20 dB(A) quieter than helical gearboxes at equivalent power. Noise levels of 55–65 dB(A) at 1 m are typical, well below most workplace noise regulations.
Absolutely. When paired with a variable frequency drive, worm gear reducers deliver smooth, infinitely adjustable output speed with no cogging or speed ripple. This is ideal for maintaining consistent film tension across varying wrapping speeds.
Food-grade worm gearboxes are largely maintenance-free. Synthetic NSF H1 lubricant change intervals are typically 10,000 hours. External stainless steel construction requires no painting or coating maintenance. The primary check is periodic seal inspection.
Have questions about worm reducer selection for film wrapping machines? Our technical support team provides free consultation, 3D CAD models, and rapid quotation for standard and custom configurations.
当サイトをご覧ください 完全な製品ラインナップ または詳細をご覧ください 当社について.
Quiet Worm Gear Reducers for Automatic Door and Parking Barrier Systems From the sliding glass…
Safety-Critical Worm Gear Reducers for Industrial Elevator and Hoist Systems Industrial elevators and hoisting equipment…
Worm Gear Drives for Automated Case Packing and Turntable Positioning Systems Modern food and consumer…
Worm Gear Reducers in Wind Turbine Blade Pitch Control Applications Wind energy is the fastest-growing…
Precision Worm Gear Drives for Solar Panel Tracking Systems Australia receives some of the highest…
Worm Gearbox Solutions for Wastewater Aeration Basin Mixing Systems Wastewater treatment is a 24/7 operation,…