{"id":1097,"date":"2020-02-25T06:21:08","date_gmt":"2020-02-25T06:21:08","guid":{"rendered":"http:\/\/reducers-worm.xyz\/?p=1097"},"modified":"2022-12-14T02:23:44","modified_gmt":"2022-12-14T02:23:44","slug":"helical-speed-reducer","status":"publish","type":"post","link":"https:\/\/reducers-worm.xyz\/ja\/helical-speed-reducer\/","title":{"rendered":"helical speed reducer"},"content":{"rendered":"

\u201cEP series\u201d inline helical equipment reducers include a HP selection of \u00bc-100 HP, 37-147 mm box sizes, 2:1-120:1 speed ratios and a cast iron casing for unquestioned strength and reliability. Offered in a number of NEMA C-face quill style motor insight flange configurations, the \u201cEP\u201d series allows users to quickly locate off-the-shelf NEMA motors instead of custom gear motors with special 1st pinion gears. EP\u2019s bolt hole pattern, base to center line elevation, result shaft diameter and usable shaft duration match the \u201cR\u201d group of the inline market head making plant retrofitting a breeze.
Product Features
2:1 – 120:1 ratios (other ratios obtainable as custom orders)
Box sizes 37 – 147
Built for high effectiveness, high strength, and low noise
All cast iron housings for unquestioned strength and reliability
Wide variety of ratios from 2:1 to 120:1
Horsepower range from 1\/4 HP to 100 HP
Gears are precision floor for better rotation and quieter operation
Gearbox flanges are created to accept NEMA C-Face electrical motors
Drop-in for some major European-produced Inline reducer brands
2-year warranty
The precision planetary gear units of the EP series with floor helical gearing and preloaded double taper roller bearings make certain low-noise synchronism because of their immense load holding capacity and rigidity even under high load circumstances. The one-piece world carrier and the built-in needle roller bearings allow the transmission of high torques. The excess shaft sealing band ensures maximum safety against dust and splash water relative to protection class IP65.
Design
The selection of an appropriate planetary gear for your
individual application.
Short delivery time
Small quantities available on short notice. Delivery
time for larger amounts or special requests has to be
checked individually
CAD drawings
Drawings for all series can be found on request
Flexibility
For customized solutions we draw from a huge range of
single components. Depending on demand they might be
combined for you personally in a flexible way
EP isn’t just known because of its comprehensive manufacturing
expertise. Our clients also revere us as experienced partners in
drive technology. This knowledge is the foundation of our planetary gear
series.
We place great importance on your flexibility in the configuration and
program of our planetary gears. Being faithful to your motto customer
satisfaction is always important.
Quality
Our high quality standards apply to almost all our planetary gearbox series.
These include especially high gearing quality, low backlash and long
service life.
Innovation
Fast response to customer requests and continuous additional development of our planetary gears is our driving force.
Close grained cast iron housing and flanges
Hardened metal helical gearing for long life
Anti-friction bearings
Double lip seals protect from oil leakage
Optional steel bolt-on base
Double bearing design on input and output shaft
EP Gear’s 800 Series contains a focused selection of compact, durable helical gear drives that offer long-lifestyle performance and simplified maintenance. A broad selection of reduction ratios fit a straight broader range of specifications, while a number of insight shaft configurations maximize versatility. In addition, the number of products that complement this series of equipment drives make it an ideal choice for today’s commercial distributor.
The 800 Series offers a functional interchange for ep and other European manufacturers’ helical gear drives,rendering it uniquely practical for substitute applications.
Four basic sizes 1\/6 – 10 HP
Over 40 different ratios 1.5:1 – 71:1 double-reduction ratios 36:1 – 250:1 triple-reduction ratios
Non-flanged and NEMA c-face input styles
Base-mount and output flange-mount models available
Output-shaft diameters from 3\/4″ to at least one 1 5\/8″
The typical NEMA C-face design will accept any standard NEMA engine, which makes it exceptionally versatile.
Ratios up to 70:1 in just two levels means increased effectiveness and reduced case size.
Accessible oil seals simplify schedule product maintenance.
All units could be double sealed on both input and output to withstand the rigors of also the most demanding applications.
800 Series drives come pre-filled with synthetic lubrication for your unique mounting position.
Sizes 3 and 4 are lubricated for life which promotes trouble-free procedure.
Washdown duty units in white-colored or stainless steel epoxy coatings make these gear drives perfect for the most severe Washdown.
Correct angle bevel speed reducers decrease speed and increase torque from the driver end to the driven end in a drive system. They have a beveled gear which allows the reducer to rotate in both directions and operate with low sound and vibration. They are typically crafted from durable, corrosion-resistant materials like stainless steel.
Features
Wide variety of accessories and nonstandard designs
Single piece casing with high structural stiffness
Benefits
Easy and functional shaft-mounting design
Minimum maintenance requirements
High, reliable and tested performance
Suitable for the heaviest duties
This economical aluminum body helical speed reducer<\/a> provides highly reliable power transmission for general purpose applications. These gearboxes offer cost effective operation and superior performance over similar products.
5 sizes with aluminum housings
Torque capacity from 200-6000 inlbs
Ratios from 2.5:1 to 600:1
Output shafts in in . or metric dimensions
Insight adapters for NEMA and IEC motors
Mounting via foot, encounter or bolt-on flange
The exclusive utilization of the involute helicoid thread form on the worm and gear provides for high efficiencies and long service existence on draglines and shovels. The hardened,ground and polished alloy steel worm develops a even, work hardened surface area on the bronze gear. Because of this, the worm gears use in and improve with extented service while other gears are wearing out.
Hardened, shaved or floor helical gears
Hollow & solid output shafts
Vertical & horizontal mountings
Fan cooled (standard)
Motor mounts
Cast iron or steel housings available<\/p>","protected":false},"excerpt":{"rendered":"

\u201cEP series\u201d inline helical equipment reducers include a HP selection of \u00bc-100 HP, 37-147 mm box sizes, 2:1-120:1 speed ratios and a cast iron casing for unquestioned strength and reliability. Offered in a number of NEMA C-face quill style motor insight flange configurations, the \u201cEP\u201d series allows users to quickly locate off-the-shelf NEMA motors instead of custom gear motors with special 1st pinion gears. EP\u2019s bolt hole pattern, base to center line elevation, result shaft diameter and usable shaft duration match the \u201cR\u201d group of the inline market head making plant retrofitting a breeze.Product Features2:1 – 120:1 ratios (other ratios obtainable as custom orders)Box sizes 37 – 147Built for high […]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[1],"tags":[],"class_list":["post-1097","post","type-post","status-publish","format-standard","hentry","category-reducers-worm"],"_links":{"self":[{"href":"https:\/\/reducers-worm.xyz\/ja\/wp-json\/wp\/v2\/posts\/1097","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/reducers-worm.xyz\/ja\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/reducers-worm.xyz\/ja\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/reducers-worm.xyz\/ja\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/reducers-worm.xyz\/ja\/wp-json\/wp\/v2\/comments?post=1097"}],"version-history":[{"count":1,"href":"https:\/\/reducers-worm.xyz\/ja\/wp-json\/wp\/v2\/posts\/1097\/revisions"}],"predecessor-version":[{"id":1098,"href":"https:\/\/reducers-worm.xyz\/ja\/wp-json\/wp\/v2\/posts\/1097\/revisions\/1098"}],"wp:attachment":[{"href":"https:\/\/reducers-worm.xyz\/ja\/wp-json\/wp\/v2\/media?parent=1097"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/reducers-worm.xyz\/ja\/wp-json\/wp\/v2\/categories?post=1097"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/reducers-worm.xyz\/ja\/wp-json\/wp\/v2\/tags?post=1097"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}