WPAWPSWPXWPO 60100 Ratio worm gear speed reducer

Шолу

Жылдам мәліметтер

Шыққан жері:

Чжэцзян, Қытай

Бренд атауы:

EPT

Модель нөмірі:

WPA

Номиналды қуат:

0,06-15 кВт

Беріліс қорабының орналасуы:

Құрт

Шығыс моменті:

2.6-1195N.M

Енгізу жылдамдығы:

1450 Rpm

Шығыс жылдамдығы:

14-280r/min

The quality of:

High quality roller chain,

Product Keywords:

boston gear spur gear

Жеткізу мүмкіндігі

Жеткізу мүмкіндігі:

Айына 10000 дана/дана

Қаптама және жеткізу

Қаптаманың егжей-тегжейлері

The cartons

Порт

shanghai

Онлайн теңшеу

Өнім сипаттамасы

WPA/WPS/WPX/WPO 60/100 Ratio worm gear speed reducer

WP series reducer, the worm is made of 45# high quality steel after heat treatment, the worm wheel is cast with tin bronze, the wear-resisting performance is good, especially on the bearing capacity is more obvious, mainly applicable to plastic, metallurgy, beverage, mine, lifting transportation, chemical construction and other mechanical equipment speed reduction drive.

A.Features:

1. Stable transmission, low vibration, impact and noise, large reduction ratio, wide versatility and suitable for use with various mechanical equipment.

2. Large transmission ratio can be obtained by single-stage transmission, with compact structure. Most reducers have good self-locking property, and can save the brake device for mechanical equipment with brake requirements.

3. The meshing friction loss between worm screw teeth and worm gear surface is relatively large, so the transmission efficiency is lower than that of gear, and it is easy to be heated and the temperature is higher.

4. Higher requirements for lubrication and cooling.

5. Good interfitting. The worm and worm are manufactured in accordance with national standards.

B.Operating conditions:

1. The speed of worm reducer should not exceed 1500r/min.,

2.working environment temperature for -40 ℃ to + 40 ℃, when working environment temperature is lower than 0 ℃, lubricating oil must be heated before starting to more than 0 ℃, when working environment temperature is higher than 40 ℃, the cooling measures must be taken.

3. The feeding shaft of the worm gear reducer can rotate positively or negatively.

C.Notice:

1. The worm gear shaft must not be used as input shaft.

2. The machine does not pump oil at the factory. Sufficient mechanical oil must be added before operation.

3. The supporting motor (i.e. power) shall not exceed the value specified in the sign.

4. If the user wants to change the direction of entering the shaft, remove the lower end cover of the shaft, take out the worm shaft and adjust 180.Load it.Press install not hard knock, can slowly drive the two shafts, make it mesh.

Producet structure

Size table

Technology Data

Түрі:		WP gearbox
Модель:		WP 40-250
Қатынас:		1:10,15,20,25,30,40,50,60,200,300,400,500,600,800,900,1200,1500,1800,2400,2500,3000,3600
Түсі:		Blue/Silver Or On Customer Request
Материал:		Housing: Die-Cast Iron cast
		Worm Gear-Copper-10-3#
		Worm-20CrMn Ti карбюраторлау және сөндірумен, беткі сым 56-62HRC
		Білік-хромды болат-45#
Қаптама:		Картон және ағаш қорап
Мойынтірек:		C&U мойынтірегі
Мөр:		NAK SKF
Кепілдік:		one year
Кіріс қуаты:		0.06KW,0.09KW,1.1KW,1.5KW 2.2KW,3KW,4KW,5.5KW,7.5KW
Қолданылуы:		Industrial Machine: Food Stuff, Ceramics,CHEMICAL,Packing,Dyeing,Woodworking,Glass.
IEC фланеці:		56B14, 63B14, 63B5, 63B5, 71B14,80B14 AND SO ON

Product show

Ұқсас өнімдер

Жиі қойылатын сұрақтар

С: Сіз сауда компаниясы немесе өндірушісіз бе?

A: Біз зауытпыз.

С: Жеткізу мерзімі қанша?

A: Generally it is 7-15 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it will depend on order quantity.

С: Сіз үлгілерді ұсынасыз ба? тегін бе, әлде қосымша ма?

A: Yes, we could offer the sample, need to charge sample cost and freight charge.

С: Сіздің төлем шарттарыңыз қандай?

A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.

If you have another question, pls feel free to contact us as below: