제품 설명
제품 설명
This gearbox is designed for plastic extrusion machine. It meet JB/T9040-1999 standard. The gear is made of high-strength alloy steel and hardened by carburizing and quenching. The accuracy of grinding teeth is higher than Level 6 and the hardness is HRC 54-62. In the front of output shaft,we assemble a thrust bearing with high safety factor to bear the extrusion pressure of screw.
Detailed Photos
| Loading capacity sheet of CHINAMFG and ZSYJ reduction gearboxes | ||||||||||||||||||||
| Type | ZLYJ | ZSYJ | ||||||||||||||||||
| Spec | △ | △ | △ | △ | △ | △ | * | * | * | * | * | * | * | * | * | * | * | * | ||
| 112 | 133 | 146 | 173 | 200 | 225 | 250 | 280 | 315 | 330 | 375 | 395 | 420 | 450 | 500 | 560 | 630 | 450 | 560 | 530 | |
| -8 | -8 | -10 | -12.5 | -12.5 | -16 | -16 | -16 | -16 | -16 | -16 | -16 | -16 | -12 | -20 | -20 | -20 | -32 | -57 | -44 | |
| Normal input power(kw) n=1500rpm | ||||||||||||||||||||
| Ordinary reliable | 15 | 22 | 30.8 | 39 | 55 | 75 | 82.5 | 116 | 171 | _ | 260 | 300 | 315 | 332 | 450 | 600 | 825 | 240 | 240 | 370 |
| High reliable | 10 | 15 | 18.3 | 30.8 | 45 | 60 | 67 | 75 | 116 | 207 | 207 | 240 | 250 | 266 | 350 | 550 | 675 | 200 | 220 | 315 |
| Allowable output torque(N.m) | ||||||||||||||||||||
| Ordinary reliable | 800 | 1165 | 1962 | 2484 | 4379 | 6568 | 7643 | 11822 | 17427 | _ | 26497 | 3571 | 32102 | 38599 | 5571 | 76433 | 105095 | 48917 | 87134 | 103694 |
| High reliable | 525 | 764 | 1165 | 1962 | 3583 | 5334 | 6306 | 7643 | 11822 | 21000 | 21096 | 24380 | 25478 | 33885 | 44566 | 70063 | 85978 | 40764 | 79873 | 88280 |
| Recommended parameters of single-screw extruder machine reduction gearbox(Optional) | ||||||||
| Type | Spec. | Power/Kw | Speed-Input | Speed-Output | Load torque/N.m | Axial force/KN | Screw diameter | Length-Diameter Ratio |
| ZLYJ | 112-8 | 5.5 | 800 | 100 | 525 | 35 | less than 35 | 25:1 |
| 113-8 | 6 | 800 | 100 | 764 | 39 | 50 | 25:1 | |
| 146-10 | 11 | 1000 | 100 | 1050 | 54 | 55 | 25:1 | |
| 173-10 | 18.5 | 900 | 90 | 1962 | 110 | 65 | 25:1 | |
| 200-12.5 | 30 | 1000 | 80 | 3581 | 155 | 75 | 25:1 | |
| 225-12.5 | 45 | 1000 | 80 | 5371 | 180 | 90 | 25:1 | |
| 250-16 | 55 | 1120 | 70 | 7503 | 192 | 105 | 25:1 | |
| 280-16 | 75 | 960 | 60 | 7643 | 258 | 110 | 25:1 | |
| 315-16 | 85 | 960 | 60 | 13528 | 287 | 120 | 25:1 | |
| 330-16 | 110 | 960 | 60 | 17528 | 360 | 135 | 25:1 | |
| 375-16 | 132 | 960 | 60 | 21008 | 390 | 150 | 25:1 | |
| 395-16 | 185 | 960 | 60 | 29442 | 400 | 160 | 25:1 | |
| 420-16 | 160/220 | 960 | 60 | 31831 | 430 | 160/170 | ||
| 450-20 | 213 | 1000 | 60 | 40640 | 500 | 180 | 25:1 | |
| 500-20 | 220 | 1000 | 50 | 42571 | 550 | 180 | 25:1 | |
| 560-17 | 440 | 1000 | 50 | 84034 | 700 | 200 | 25:1 | |
| 630-10 | 540 | 1000 | 50 | 15712 | 770 | 250 | 25:1 | |
| ZSYJ | 450-32 | 200 | 1500 | 47 | 4 0571 | 500 | 165 | 25:1 |
| 560-57 | 220 | 1500 | 26 | 80802 | 700 | 190 | 25:1 | |
Company Profile
Zhe jiang yifan gear box group CO., LTD was set up in 1970. It specializes in developing and producing small and medium-sized marine gearboxes, plastic extruder slowdown bins, Z4 DC motors,generators and so on.There are mainly 300 moreproduction equipments,including more than60 big,fine and expensive ones. The area of our company is 110, 000 square meters.There are 350 staff,and 25%of the total number are the middle and senior technical members. Since the venture,we commit toresearching and developing new products,and keeping improving the technology. We pay great attention to the after-salesservice. All of these efforts increase the developing footsteps of our company. We have strong technical strength , sophisticatedprocessing equipments,advanced products detection equipments,and own a complete security system including productsdesigned,mechanical processing,unit assembly,testing before coming out from the factory and after-sales service. Ourproducts have passed the ISO9001 Quality System Certification.
인증
Our Advantages
1: High transmission efficiency
2: Smooth operation and low noise
3: Small size and high carrying capacity.
4: Easy to disassemble and easy to install.
자주 묻는 질문
Q: Are you trading company or manufacturer?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock.
Q: Can we buy 1 pc of each item for quality testing?
A: Yes, we are glad to accept trial order for quality testing.
| 애플리케이션: | 기계 |
|---|---|
| 기능: | 속도 감소 |
| 공들여 나열한 것: | 같은 축의 |
| 경도: | 경화된 치아 표면 |
| 설치: | 수평형 |
| 단계: | 더블 스텝 |
| Samples: | US$ 500/Piece 1 Piece(Min.Order) | |
|---|
Common Problems and Troubleshooting for Worm Gearboxes
Worm gearboxes, like any mechanical component, can experience various issues over time. Here are some common problems that may arise and possible troubleshooting steps:
- Overheating: Overheating can occur due to factors such as inadequate lubrication, excessive loads, or high operating temperatures. Check lubrication levels, ensure proper ventilation, and reduce loads if necessary.
- Noise and Vibration: Excessive noise and vibration may result from misalignment, worn gears, or improper meshing. Check for misalignment, inspect gear teeth for wear, and ensure proper gear meshing.
- Leakage: Oil leakage can be caused by damaged seals or gaskets. Inspect seals and gaskets, and replace them if necessary.
- Reduced Efficiency: Efficiency loss can occur due to friction, wear, or misalignment. Regularly monitor gearbox performance, ensure proper lubrication, and address any wear or misalignment issues.
- 백래시: Excessive backlash can affect precision and accuracy. Adjust gear meshing and reduce backlash to improve performance.
- Seizure or Binding: Seizure or binding can result from inadequate lubrication, debris, or misalignment. Clean the gearbox, ensure proper lubrication, and address misalignment issues.
- Worn Gears: Worn gear teeth can lead to poor performance. Regularly inspect gears for signs of wear, and replace worn gears as needed.
- Seal Wear: Seals can wear over time, leading to leakage and contamination. Inspect seals regularly and replace them if necessary.
If you encounter any of these problems, it’s important to address them promptly to prevent further damage and maintain the performance of your worm gearbox. Regular maintenance, proper lubrication, and addressing issues early can help extend the lifespan and reliability of the gearbox.
Worm Gearbox Applications in Robotics and Automation
Worm gearboxes play a crucial role in various robotics and automation applications due to their unique characteristics and benefits. Here are some common applications where worm gearboxes are used:
- Robotic Arm Movement: Worm gearboxes are employed in robotic arms to provide precise and controlled movement. The self-locking property of worm gearboxes helps maintain the arm’s position without requiring additional brakes.
- Conveyor Systems: In automated production lines, worm gearboxes are used to drive conveyor belts and move materials or products along assembly lines with accuracy.
- Precision Positioning: Worm gearboxes are used in precision positioning systems, such as those found in pick-and-place robots and CNC machines. They ensure accurate and repeatable movements.
- Pan and Tilt Mechanisms: Worm gearboxes are utilized in pan and tilt mechanisms of surveillance cameras, robotic cameras, and sensors. The self-locking feature helps stabilize and maintain the desired angle.
- Automated Gates and Doors: Worm gearboxes are used in automated gate and door systems to control their opening and closing movements smoothly and safely.
- Material Handling: Robots in warehouses and distribution centers use worm gearboxes to manipulate and lift objects, enhancing efficiency in material handling.
- Medical Robotics: Worm gearboxes are employed in medical robots for surgical procedures, diagnostic equipment, and rehabilitation devices, ensuring precise and controlled movements.
- Industrial Robots: Industrial robots rely on worm gearboxes for various tasks, including welding, painting, assembly, and packaging, where precise movements are essential.
- Automated Testing Equipment: In testing and inspection applications, worm gearboxes provide the necessary movement and positioning for accurate testing and measurements.
- Food and Beverage Industry: Worm gearboxes are used in automated food processing and packaging systems, ensuring hygienic and precise movement of products.
Worm gearboxes are preferred in these applications due to their compact size, high torque output, self-locking feature, and ability to provide a right-angle drive. However, selecting the right gearbox requires considering factors such as load, speed, efficiency, and environmental conditions.
용도에 맞는 웜 기어박스 선택 방법
용도에 맞는 웜 기어박스를 선택하려면 다양한 요소를 신중하게 고려해야 합니다.
- 부하 요구 사항: 선택한 기어박스가 성능 저하 없이 부하를 처리할 수 있도록 애플리케이션의 토크 및 부하 요구 사항을 파악하십시오.
- 속도 감소: 원하는 출력 속도를 얻기 위해 필요한 감속비를 계산하십시오. 웜 기어박스는 높은 감속비로 잘 알려져 있습니다.
- 능률: 기어박스의 효율을 고려하십시오. 웜 기어박스는 일반적으로 슬라이딩 동작으로 인해 효율이 낮습니다. 효율이 사용 목적에 필요한 수준을 충족하는지 평가하십시오.
- 공간 제약: 기어박스를 설치할 수 있는 공간을 평가하십시오. 웜 기어박스는 컴팩트한 설계로 공간이 제한적인 환경에 적합합니다.
- 설치 옵션: 사용 환경에 가장 적합한 장착 방향 및 구성을 결정하십시오.
- 운영 환경: 온도, 습도, 오염 물질 노출 등의 요소를 고려하십시오. 환경에 견딜 수 있도록 적절한 밀봉재와 재질을 갖춘 기어박스를 선택하십시오.
- 백래시: 사용 환경에서 허용 가능한 백래시 수준을 평가하십시오. 웜 기어박스는 다른 기어 유형에 비해 백래시가 더 클 수 있습니다.
- 자동 잠금 기능: 자체 잠금 기능이 필요한 경우, 선택한 변속기가 외부 제동 장치 없이 역회전을 방지할 수 있는지 확인하십시오.
- 유지: 기어박스의 유지보수 요구 사항을 고려하십시오. 일부 웜 기어박스는 적절한 작동을 보장하기 위해 주기적인 윤활 및 유지보수가 필요합니다.
- 비용: 변속기의 기능과 성능을 전체적인 비용과 비교하여 예산에 맞는 제품을 선택하세요.
변속기 제조업체 또는 전문가와 상담하여 특정 용도에 맞는 권장 사항을 받으십시오. 테스트 및 시뮬레이션을 통해 특정 변속기가 요구 사항에 적합한지 검증할 수도 있습니다.
editor by CX 2023-09-22