Penerangan Produk
Penerangan Produk
This gearbox is designed for plastic extrusion machine. It meet JB/T9040-1999 standard. The gear is made of high-strength alloy steel and hardened by carburizing and quenching. The accuracy of grinding teeth is higher than Level 6 and the hardness is HRC 54-62. In the front of output shaft,we assemble a thrust bearing with high safety factor to bear the extrusion pressure of screw.
Detailed Photos
| Loading capacity sheet of CHINAMFG and ZSYJ reduction gearboxes | ||||||||||||||||||||
| Type | ZLYJ | ZSYJ | ||||||||||||||||||
| Spec | △ | △ | △ | △ | △ | △ | * | * | * | * | * | * | * | * | * | * | * | * | ||
| 112 | 133 | 146 | 173 | 200 | 225 | 250 | 280 | 315 | 330 | 375 | 395 | 420 | 450 | 500 | 560 | 630 | 450 | 560 | 530 | |
| -8 | -8 | -10 | -12.5 | -12.5 | -16 | -16 | -16 | -16 | -16 | -16 | -16 | -16 | -12 | -20 | -20 | -20 | -32 | -57 | -44 | |
| Normal input power(kw) n=1500rpm | ||||||||||||||||||||
| Ordinary reliable | 15 | 22 | 30.8 | 39 | 55 | 75 | 82.5 | 116 | 171 | _ | 260 | 300 | 315 | 332 | 450 | 600 | 825 | 240 | 240 | 370 |
| High reliable | 10 | 15 | 18.3 | 30.8 | 45 | 60 | 67 | 75 | 116 | 207 | 207 | 240 | 250 | 266 | 350 | 550 | 675 | 200 | 220 | 315 |
| Allowable output torque(N.m) | ||||||||||||||||||||
| Ordinary reliable | 800 | 1165 | 1962 | 2484 | 4379 | 6568 | 7643 | 11822 | 17427 | _ | 26497 | 3571 | 32102 | 38599 | 5571 | 76433 | 105095 | 48917 | 87134 | 103694 |
| High reliable | 525 | 764 | 1165 | 1962 | 3583 | 5334 | 6306 | 7643 | 11822 | 21000 | 21096 | 24380 | 25478 | 33885 | 44566 | 70063 | 85978 | 40764 | 79873 | 88280 |
| Recommended parameters of single-screw extruder machine reduction gearbox(Optional) | ||||||||
| Type | Spec. | Power/Kw | Speed-Input | Speed-Output | Load torque/N.m | Axial force/KN | Screw diameter | Length-Diameter Ratio |
| ZLYJ | 112-8 | 5.5 | 800 | 100 | 525 | 35 | less than 35 | 25:1 |
| 113-8 | 6 | 800 | 100 | 764 | 39 | 50 | 25:1 | |
| 146-10 | 11 | 1000 | 100 | 1050 | 54 | 55 | 25:1 | |
| 173-10 | 18.5 | 900 | 90 | 1962 | 110 | 65 | 25:1 | |
| 200-12.5 | 30 | 1000 | 80 | 3581 | 155 | 75 | 25:1 | |
| 225-12.5 | 45 | 1000 | 80 | 5371 | 180 | 90 | 25:1 | |
| 250-16 | 55 | 1120 | 70 | 7503 | 192 | 105 | 25:1 | |
| 280-16 | 75 | 960 | 60 | 7643 | 258 | 110 | 25:1 | |
| 315-16 | 85 | 960 | 60 | 13528 | 287 | 120 | 25:1 | |
| 330-16 | 110 | 960 | 60 | 17528 | 360 | 135 | 25:1 | |
| 375-16 | 132 | 960 | 60 | 21008 | 390 | 150 | 25:1 | |
| 395-16 | 185 | 960 | 60 | 29442 | 400 | 160 | 25:1 | |
| 420-16 | 160/220 | 960 | 60 | 31831 | 430 | 160/170 | ||
| 450-20 | 213 | 1000 | 60 | 40640 | 500 | 180 | 25:1 | |
| 500-20 | 220 | 1000 | 50 | 42571 | 550 | 180 | 25:1 | |
| 560-17 | 440 | 1000 | 50 | 84034 | 700 | 200 | 25:1 | |
| 630-10 | 540 | 1000 | 50 | 15712 | 770 | 250 | 25:1 | |
| ZSYJ | 450-32 | 200 | 1500 | 47 | 4 0571 | 500 | 165 | 25:1 |
| 560-57 | 220 | 1500 | 26 | 80802 | 700 | 190 | 25:1 | |
Profil Syarikat
Zhe jiang yifan gear box group CO., LTD was set up in 1970. It specializes in developing and producing small and medium-sized marine gearboxes, plastic extruder slowdown bins, Z4 DC motors,generators and so on.There are mainly 300 moreproduction equipments,including more than60 big,fine and expensive ones. The area of our company is 110, 000 square meters.There are 350 staff,and 25%of the total number are the middle and senior technical members. Since the venture,we commit toresearching and developing new products,and keeping improving the technology. We pay great attention to the after-salesservice. All of these efforts increase the developing footsteps of our company. We have strong technical strength , sophisticatedprocessing equipments,advanced products detection equipments,and own a complete security system including productsdesigned,mechanical processing,unit assembly,testing before coming out from the factory and after-sales service. Ourproducts have passed the ISO9001 Quality System Certification.
Pensijilan
Our Advantages
1: High transmission efficiency
2: Smooth operation and low noise
3: Small size and high carrying capacity.
4: Easy to disassemble and easy to install.
Soalan Lazim
Q: Are you trading company or manufacturer?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock.
Q: Can we buy 1 pc of each item for quality testing?
A: Yes, we are glad to accept trial order for quality testing.
| Permohonan: | Machinery |
|---|---|
| Fungsi: | Speed Reduction |
| Susun atur: | Coaxial |
| Kekerasan: | Permukaan Gigi yang Mengeras |
| Pemasangan: | Horizontal Type |
| Langkah: | Langkah Berganda |
| Sampel: | US$ 500/Keping 1 Keping (Pesanan Minimum) | |
|---|
Common Problems and Troubleshooting for Worm Gearboxes
Worm gearboxes, like any mechanical component, can experience various issues over time. Here are some common problems that may arise and possible troubleshooting steps:
- Overheating: Overheating can occur due to factors such as inadequate lubrication, excessive loads, or high operating temperatures. Check lubrication levels, ensure proper ventilation, and reduce loads if necessary.
- Bunyi dan Getaran: Excessive noise and vibration may result from misalignment, worn gears, or improper meshing. Check for misalignment, inspect gear teeth for wear, and ensure proper gear meshing.
- Leakage: Oil leakage can be caused by damaged seals or gaskets. Inspect seals and gaskets, and replace them if necessary.
- Reduced Efficiency: Efficiency loss can occur due to friction, wear, or misalignment. Regularly monitor gearbox performance, ensure proper lubrication, and address any wear or misalignment issues.
- Tindak balas: Excessive backlash can affect precision and accuracy. Adjust gear meshing and reduce backlash to improve performance.
- Seizure or Binding: Seizure or binding can result from inadequate lubrication, debris, or misalignment. Clean the gearbox, ensure proper lubrication, and address misalignment issues.
- Worn Gears: Worn gear teeth can lead to poor performance. Regularly inspect gears for signs of wear, and replace worn gears as needed.
- Seal Wear: Seals can wear over time, leading to leakage and contamination. Inspect seals regularly and replace them if necessary.
If you encounter any of these problems, it’s important to address them promptly to prevent further damage and maintain the performance of your worm gearbox. Regular maintenance, proper lubrication, and addressing issues early can help extend the lifespan and reliability of the gearbox.
Aplikasi Kotak Gear Cacing dalam Robotik dan Automasi
Kotak gear cacing memainkan peranan penting dalam pelbagai aplikasi robotik dan automasi kerana ciri dan faedah uniknya. Berikut adalah beberapa aplikasi biasa di mana kotak gear cacing digunakan:
- Pergerakan Lengan Robotik: Worm gearboxes are employed in robotic arms to provide precise and controlled movement. The self-locking property of worm gearboxes helps maintain the arm’s position without requiring additional brakes.
- Sistem Penghantar: Dalam barisan pengeluaran automatik, kotak gear cacing digunakan untuk memacu tali sawat dan menggerakkan bahan atau produk di sepanjang barisan pemasangan dengan tepat.
- Kedudukan Ketepatan: Kotak gear cacing digunakan dalam sistem kedudukan tepat, seperti yang terdapat dalam robot pilih dan letakkan dan mesin CNC. Ia memastikan pergerakan yang tepat dan boleh diulang.
- Mekanisme Pan dan Condong: Kotak gear cacing digunakan dalam mekanisme pan dan tilt kamera pengawasan, kamera robotik dan sensor. Ciri mengunci sendiri membantu menstabilkan dan mengekalkan sudut yang diingini.
- Pintu dan Pagar Automatik: Kotak gear cacing digunakan dalam sistem pintu dan pintu automatik untuk mengawal pergerakan pembukaan dan penutupannya dengan lancar dan selamat.
- Pengendalian Bahan: Robot di gudang dan pusat pengedaran menggunakan kotak gear cacing untuk memanipulasi dan mengangkat objek, meningkatkan kecekapan dalam pengendalian bahan.
- Robotik Perubatan: Kotak gear cacing digunakan dalam robot perubatan untuk prosedur pembedahan, peralatan diagnostik dan peranti pemulihan, memastikan pergerakan yang tepat dan terkawal.
- Robot Perindustrian: Robot industri bergantung pada kotak gear cacing untuk pelbagai tugas, termasuk kimpalan, pengecatan, pemasangan dan pembungkusan, di mana pergerakan yang tepat adalah penting.
- Peralatan Ujian Automatik: Dalam aplikasi pengujian dan pemeriksaan, kotak gear cacing menyediakan pergerakan dan kedudukan yang diperlukan untuk pengujian dan pengukuran yang tepat.
- Industri Makanan dan Minuman: Kotak gear cacing digunakan dalam sistem pemprosesan dan pembungkusan makanan automatik, memastikan pergerakan produk yang bersih dan tepat.
Kotak gear cacing lebih digemari dalam aplikasi ini kerana saiznya yang padat, output tork yang tinggi, ciri penguncian kendiri dan keupayaan untuk menyediakan pemacu sudut kanan. Walau bagaimanapun, memilih kotak gear yang betul memerlukan pertimbangan faktor seperti beban, kelajuan, kecekapan dan keadaan persekitaran.
How to Select the Right Worm Gearbox for Your Application
Selecting the right worm gearbox for your application involves careful consideration of various factors:
- Load Requirements: Determine the torque and load requirements of your application to ensure the selected gearbox can handle the load without compromising performance.
- Speed Reduction: Calculate the required gear reduction ratio to achieve the desired output speed. Worm gearboxes are known for high reduction ratios.
- Kecekapan: Consider the gearbox’s efficiency, as worm gearboxes typically have lower efficiency due to the sliding action. Evaluate whether the efficiency meets your application’s needs.
- Space Constraints: Assess the available space for the gearbox. Worm gearboxes have a compact design, making them suitable for applications with limited space.
- Mounting Options: Determine the mounting orientation and configuration that best suits your application.
- Operating Environment: Consider factors such as temperature, humidity, and exposure to contaminants. Choose a gearbox with appropriate seals and materials to withstand the environment.
- Tindak balas: Evaluate the acceptable level of backlash in your application. Worm gearboxes may exhibit more backlash compared to other gear types.
- Self-Locking: If self-locking capability is required, confirm that the selected gearbox can prevent reverse motion without the need for external braking mechanisms.
- Maintenance: Consider the maintenance requirements of the gearbox. Some worm gearboxes require periodic lubrication and maintenance to ensure proper functioning.
- Cost: Balance the features and performance of the gearbox with the overall cost to ensure it aligns with your budget.
Consult with gearbox manufacturers or experts to get recommendations tailored to your specific application. Testing and simulations can also help validate the suitability of a particular gearbox for your needs.
editor by CX 2023-09-22