worm motor
A robust worm-get gearbox powered by an MM28 motor. Ideal applications where an easy to match, high torque productivity is required. Ideal for student based tasks which includes robots and buggies.
The unit has been designed so that the output shaft could be ‘clicked’ in and out for modification. Electronic.g. reducing to size. The engine is snap installed into its cradle to engage the apparatus and worm.
Details
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
General dimensions of box + motor: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the engine isn’t turning. The high gear ratios of 216:1 or 336:1 make this gearbox appropriate for small walking robots, lifting mechanisms, and various other applications where high torque is desired.
The low-voltage motors in the worm gearbox run on 1.5-4.5 volts and draw up to a few amps, making them ideal applicants for the DRV8833 motor driver carrier. Motor overheating can be caused by excessive stalling, also at very low voltages. We recommend that you utilize stall-detection sensors, or just watch your robot, to make sure that it doesn\u2019t stall for more than a few seconds at a time.
This gearbox has a 4 mm diameter, round output shaft, which works together with the wheels that are appropriate for Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also suits on small threaded end of the shaft, though it is not specifically intended to work with this type of shaft (the hub\u2019s set screw could damage the thread on the shaft).
Ever-Power gear motors will be economical, right-angle, worm-geared motors that install easily found in the tightest applications. Economical correct angle worm geared motors set new standards for reliability, effectiveness and economy with unparalleled features including hollow shafts in the smallest sizes. An inverter friendly design provides for easy integration right now and a really future proof option. The Ever-Power gear motor offers total flexibility in mounting choices includes shaft, base, face, and flange alternatives. The motor terminal box could be mounted in alternative positions rotated in 90\u00ba steps around the engine frame providing for unparalleled integration possibilities.
Ever-Power gear motors comply with North American and International standards, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a true total remedy for our global clients.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dirt tight and hose proof,and can be used outdoors or in wet and dusty conditions without the use of additional enclosures. Full rated output is available at the result shaft of the machine.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change initial after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50\/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Connect connectors.
With built-in inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm gear motors are the solution for applications requiring a corner turn, optional dual result, or an inability for the motor to be back driven. The DC right angle gear motors are designed for constant and intermittent duty operation. Our right angle equipment reducers were created with a number of mounting plate options, making them perfect for a variety of DC motor based applications. We offer 12 ratios which range from 5:1 to 100:1.
10309
FEATURES
1\/43 to 3\/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Standard brush life of 2000+ hours (varies by application)
EP Products Worm Gear Motors are designed to generate high torque in a little package size. Worm Equipment Motors are excellent for applications that want a personal- locking or breaking characteristic since the result shaft can\u2019t rotate when there\u2019s no power applied. Also, Worm Gearheads can transfer motion in 90 degrees. With various reduction ratios, precision cut gears, voltages and sizes, EP Items has a DC Worm Equipment Motor solution for the application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking \/ Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Equipment Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Security Door Locks \/ Industrial Conveying Systems \/ Security Gates \/ Dental care Chair \/ Ambulance Cots & Stretchers Quite a few DC Motors can be complimented with one of our Worm Gearheads. EP Products will continue to work with you to create and produce a Worm Gear Electric motor that will optimize the performance of your specific application.
Built to your unique requirements
Engine Type: Brushed \/ Brushless \/ Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Trim \/ Round \/ Splined \/ Other)
General Size Parameters (L, W, H)
Encoder Type: Optical \/ Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm engine uses a metal gear box for sturdiness and a higher torque output. Due to the special mechanical structure of the worm travel the engine output shaft can be self locking and may not be rotated.
This part runs on the two wire connection and supports direction control and also PWM speed control. Rated voltage is 12v and can attain 40RPM, with a torque of 8kg\/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg\/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear systems from EP DRIVESYSTEMS especially display their strength in applications where superior gear ratios are essential. Our worm geared motors will be as a result optimally suited for use in intralogistics, packaging technology and the food & beverage industry.
Four great known reasons for EP worm geared motors:
Rugged
Our worm geared motors have a high overload capacity
Maintenance Friendly
Washdown versions enable simple and effective cleaning of the drive system.
Corrosion protection
![](\"http:\/\/gearboxes-worm.xyz\/wp-content\/uploads\/2020\/03\/worm-motor.jpg\")
The NSD tupH sealed surface area conversion is exceptionally chemical, corrosion and abrasion resistant.Flexibility
Our modular design give users optimum freedom.
The modular system for optimum flexibility: Our EP worm gear units
There are many applications that require drive systems, and each one of these has its unique requirements. The EP series worm gear motors could be quickly and efficiently adapted to meet your needs.
Worm gear units impress with their large power density and compact style. If required, we can also supply them with the highly effective nsd tupH surface area treatment.
In addition to the basic EP casing, we offer an extensive type of bolt-on components to customize the product including torque arms, shaft covers and output flanges. These can be easily field set up, but we may also be happy to assemble the average person components for you.
Discover more about the modular SI worm geared motors!
Find out more
Smooth and Tidy: The EP worm equipment unit SMI
SMI worm gear models feature a soft, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface area conversion makes the product preferably suited for severe and demanding industries like meals processing and pharmaceuticals.
Versatile input designs such as NEMA, IEC or immediate motor mounts in extra foot or flange mounted housing designs.
Worm geared motors
Worm geared motors for little power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared electric motor program. The units have on all sides diverse repairing possibilities and enable a simple assembling for the client.
Additional drive configurationscan be created by use of built-about add-ons (e.g. torque arm and result flanges). The housings are created in light weight structure out of aluminium die cast. Engine attachment is realised generally by means of IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly\/installation:uniblock, flange, torque arm
Buy Worm Drive Gearbox with Motor – incorporating the next features: 1 to 6V voltage ranking, 17100 rpm no load velocity, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm extensive, 40mm high, a good robust worm drive gearbox powered by an MM28 engine (included), most suitable for applications where an easy to match, high torque outcome is required, nylon housing and gear, requires light oil or perhaps silicon grease lubrication, perfect for student based projects including robots and buggies.
Most ideal for applications where an easy to fit, high torque output is required
Ideal for student based projects including robots and buggies
Reversible Large torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Reversible Huge torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Features:
The engine is Gear DC electric motor with micro-turbine worm, you can transform the wiring-connection to change motor rotation.
Turbo worm geared motor with self-lock, that is, in the case of motor without electrical, the productivity axis can be fixed, self-lock.
The reducer output shaft arranged vertically with the engine shaft, whole motor output shaft relatively-short than general gear motor, widely used to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r\/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the window, door, Mini winch. Ect.
In sumo robot or combat robot competition where substantial holding torque’s motor is essential to avoid your robot being pushed by your opponent robot. The worm gear is definitely an improved option when compared to spur gear motor. Why is worm gear so unique? Take a look wiki out: Worm Drive.
“Unlike with ordinary equipment trains, the direction of transmission (insight shaft vs output shaft) isn’t reversible when using large reduction ratios, due to the greater friction involved between the worm and worm-wheel, when usually a single start (1 spiral) worm is used. This is normally a advantage when it’s desired to get rid of any likelihood of the output driving the input.”
In other terms, it is hard to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g<\/p>\n