Descrição do produto
Reliability
DT14 adopts a fully helical gear and planetary gearbox structure, with low noise and strong load-bearing capacity;
The pressure resistance and overheating resistance of the friction material of the synchronizer are leading domestically, and the lifespan of the synchronizer has been extended to match that of the gearbox assembly;
The DT14 assembly has undergone 2 million kilometers of road validation, and the B10 has a lifespan of 1.6 million kilometers. The entire series can be equipped with hydraulic retarders to ensure driving safety.
Convenience
Single H control of the top cover and front and rear auxiliary box pneumatic shift mode, achieving step-by-step gear shifting and jumping operation, with clear gear positions and convenient operation;
Self enhancing double cone synchronizer reduces shifting force by 2-3 times compared to synchronizers of the same level, making shifting more lightweight and giving a sedan like feel;
The ultra long oil change cycle of 300000 kilometers is at the leading level in the industry, making it easier for users to use.
High efficiency
Adopting a dual lubrication method of active lubrication and splash lubrication to lubricate key components such as bearings, synchronizers, and gears, providing more complete lubrication and lower friction losses;
By using an independent external oil cooling system, the problem of high temperature of the gearbox assembly in special road conditions (climbing long slopes) is avoided, ensuring stable operation of components, higher transmission efficiency, and prolonging oil change HangZhouage and gearbox service life.
| Transmission product characteristic parameters | |
| Torque (N · m) | 2000-3200 |
| Transmission efficiency | 97.4% |
| Noise (dB) | 86 |
| Net weight (kg) | 302 |
| Oil change HangZhouage (km) | 300 thousand |
| Speed ratio | DD/OD(DD:1-16.41,3.22-15.06 OD:0.8-13.16,2.58-12.09) |
| B10 Durability (km) | 1 million 200 thousand |
Here’s why our products stand out:
1. Extensive Product Range: We offer a diverse selection of buses, school buses, andspecial purpose vehicles to cater to various transportation needs. Whether yourequire standard buses for public transport, specialized school buses withenhanced safety features, or custom-built special purpose vehicles for specificapplications, we have a solution to meet your requirements.
2. Superior Quality and Reliability: Our vehicles are manufactured to the highestindustry standards, ensuring exceptional quality, reliability, and longevity. Wecollaborate with reputable manufacturers and conduct rigorous quality controlchecks to deliver products that exceed customer expectations. Our commitmentto CHINAMFG is reflected in every vehicle we offer.
3. Cutting-Edge Technology: We incorporate advanced technologies andinnovations into our vehicles to enhance performance, efficiency, and safety.From fuel-efficient engines and intelligent control systems to state-of-the-art
safety features and eco-friendly designs, our products are at the forefront ofautomotive technology.
4. Customization Options: We understand that every client has unique needs ancpreferences, Therefore, we provide customization options to tailor our vehiclesaccording to specific requirements. Whether it’s seating capacity, interiorconfigurations, accessibility features, or branding elements, we work closely withour clients to deliver personalized solutions.
5. Focus on Safety: Safety is our top priority. Our school buses are designed withcomprehensive safety features, including reinforced structures, advanced brakincsystems, and integrated safety technologies. We prioritize passenger and driversafety to provide peace of mind for both educational institutions and parents.
6. Exceptional After-Sales Service: Our commitment to customer satisfactionextends beyond the purchase. We provide reliable after-sales service andsupport, including spare parts availability, technical assistance, and maintenanceguidance. Our dedicated team ensures that our customers receive prompt andefficient service throughout the ownership lifecycle.
Perguntas frequentes
1.What do you need to provide a quote?
Please kindly send us the drawing of your product. Details below should be included,
A.Materials B. Surface Finish C. Tolerance D. Quantity
(Please be noted that these are essential for our quoting. We couldn’t quote the specific
price without any of them.).
2.When can I get the price?
Our professional sales team will feedback your RFQ within 12hours, and give you the Quotation within 48hours max. if the drawing and specification is all in details.
3.How can I get the sample to check your quality?
After price confirmation, you can require for samples to check our product’s quality. If you just need a blank sample to check the manufacturing quality, we will provide you sample after the sample order confirmed.
4.What’s the lead time for Mould and samples ?
For normal project, we can complete Mould and supply the 1st article sample within 30 to 40days.
For urgently project, we can complete the Mould and Sample within 20days max.
5.What’s the payment terms for Order ?
For Mould/tooling and sample : 50% deposit pay by Order, rest 50% pay after sample approval.
For production Order for new Customers : we request 30% down payment, rest 70% pay by copy of Original B/L copy. For long lasting regular customer, we can give better payment terms, such as 100% pay after delivery or by B/L copy.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | 1 Year |
|---|---|
| Warranty: | 1 Year |
| Certification: | TUV, GS |
| Torque (N · M): | 2000-3200 |
| Transmission Efficiency: | 97.4% |
| Noise (dB): | 86 |
| Personalização: | Disponível | Solicitação personalizada |
|---|
Maintenance Tips for Prolonging the Life of a Worm Gearbox
Proper maintenance is essential to ensure the longevity and reliable performance of a worm gearbox. Here are some maintenance tips to consider:
- Lubrificação: Regularly check and replenish the lubricant in the gearbox. Use the recommended lubricant type and quantity specified by the manufacturer.
- Lubrication Schedule: Follow a lubrication schedule based on the operating conditions and manufacturer recommendations. Regular lubrication prevents friction, reduces wear, and dissipates heat.
- Temperature Monitoring: Keep an eye on the operating temperature of the gearbox. Excessive heat can degrade the lubricant and damage components.
- Cleanliness: Keep the gearbox and surrounding area clean from debris and contaminants. Regularly inspect and clean the gearbox exterior.
- Seal Inspection: Check for any leaks or damage to seals and gaskets. Replace them promptly to prevent lubricant leaks and contamination.
- Alignment: Ensure proper alignment between the worm and worm wheel. Misalignment can lead to increased wear and reduced efficiency.
- Torque Monitoring: Monitor the torque levels during operation. Excessive torque can cause overloading and premature wear.
- Regular Inspections: Periodically inspect all components for signs of wear, damage, or unusual noise. Replace worn or damaged parts promptly.
- Proper Usage: Operate the gearbox within its specified limits, including load, speed, and temperature. Avoid overloading or sudden changes in operating conditions.
- Expert Maintenance: If major maintenance or repairs are needed, consult the manufacturer’s guidelines or seek the assistance of qualified technicians.
By following these maintenance tips and adhering to the manufacturer’s recommendations, you can extend the lifespan of your worm gearbox and ensure its optimal performance over time.
Materials Used for Worm Gears
Worm gears are manufactured using a variety of materials to meet different application requirements. Some commonly used materials for worm gears include:
- Steel: Steel is a popular choice for worm gears due to its strength, durability, and wear resistance. It can handle heavy loads and is often used in industrial applications.
- Bronze: Bronze offers good lubricity and is commonly used for the worm gear (worm) component. It provides effective wear resistance and works well in applications where quiet operation is essential.
- Cast Iron: Cast iron is known for its high strength and durability. It’s often used for worm gears in applications where shock loads or heavy-duty conditions are expected.
- Aluminum: Aluminum worm gears are lightweight and corrosion-resistant, making them suitable for applications where weight reduction is important.
- Plastic: Some worm gears are made from plastic materials such as nylon or acetal. These materials are often chosen for their self-lubricating properties and quiet operation.
- Composite Materials: Composite materials can offer a combination of properties, such as lightweight construction and corrosion resistance. They can be suitable for specific applications.
The choice of material depends on factors such as the application’s load, speed, operating environment, and required performance characteristics. It’s important to consider these factors when selecting the appropriate material for worm gears to ensure optimal performance and longevity.
Vantagens de usar um redutor de rosca sem-fim em sistemas mecânicos
Os redutores de rosca sem-fim oferecem diversas vantagens que os tornam adequados para vários sistemas mecânicos:
- Relação de redução de engrenagem alta: As caixas de engrenagens helicoidais proporcionam uma redução de velocidade significativa, tornando-as ideais para aplicações que exigem uma alta relação de redução de engrenagem sem a necessidade de múltiplas engrenagens.
- Design compacto: Os redutores de rosca sem-fim possuem um design compacto e que economiza espaço, permitindo sua utilização em aplicações com espaço limitado.
- Travamento automático: As caixas de engrenagens helicoidais apresentam propriedades de travamento automático, o que significa que o parafuso sem-fim pode impedir que a roda helicoidal inverta seu movimento. Isso é benéfico para aplicações em que a caixa de engrenagens precisa manter uma carga no lugar sem mecanismos de frenagem externos.
- Funcionamento suave e silencioso: As caixas de engrenagens helicoidais funcionam com um movimento deslizante entre os dentes, resultando em um funcionamento mais suave e silencioso em comparação com outros tipos de caixas de engrenagens.
- Transmissão de Alto Torque: As caixas de engrenagens helicoidais podem transmitir altos níveis de torque, tornando-as adequadas para aplicações que exigem uma saída de torque potente.
- Dissipação de calor: O movimento deslizante entre o parafuso sem-fim e a roda dentada contribui para a dissipação de calor, o que pode ser vantajoso em aplicações que geram calor durante a operação.
- Desempenho estável: Os redutores de rosca sem-fim oferecem desempenho estável e confiável, tornando-os adequados para operação contínua em diversos sistemas industriais e mecânicos.
Despite these advantages, it’s important to note that worm gearboxes also have limitations, such as lower efficiency compared to other gear types due to the sliding motion and potential for higher heat generation. Therefore, selecting the appropriate type of gearbox depends on the specific requirements and constraints of the application.
editor by CX 2024-04-22