Descrição do produto
Fotos detalhadas
Parâmetros do produto
R Series reducers are designed and manufactured on the basis of modular combination system.
There are a lot of motor combinations, installation forms and structural schemes. The transmission
ratio is classified and fine to meet different operating conditions, and the performance is superior.
Reinforced high rigid cast iron box; The hardened gear is made of high-quality alloy steel. Its surface
is carburized, quenched and hardened, and the gear is finely ground. It has stable transmission, low
noise, and large bearing capacity. Low temperature rise, long service life. It is widely used in metallurgy,1. Features: small offset output, compact structure, maximum use of box space, use of integral casting box, good stiffness, can improve the strength of the shaft and bearing life.
2. Installation type and output mode: bottom seated type and large and small flange type installation, CHINAMFG shaft output.
3. Input mode: direct motor, shaft input and connecting flange input.
4. Reduction ratio: secondary 5~24.8, tertiary 27.2~264, R/R combination up to 18125.
5. Average efficiency: Class II 96%, Class III 94%, R/R combination 85%.
6. The R series specially designed for mixing can bear large axial and radial forces.
Technical parameters:
Coaxial coaxial output
R reducer
Power: 0.12KW~160KW
Torque: 1.4N · m ~ 23200N · m
Output speed: 0.06 ~ 1090r/min
Model example:
R17-Y4-4P-32.40-M1-0°
R: Series code
F: Shaft extension flange installation
17: Machine model
Y: Three phase AC asynchronous motor
4: Motor power
4P: motor stage
32.40: Transmission ratio
M1: Installation type
0 °: junction box position (0 ° – 270 °)
R series helical gear hardened gear reducer
Basic model of R series reducer:
R17R27R37R47R57R67R77R87R97R107R137R147R167
RF17RF27RF37RF47RF57RF67RF77RF87RF97RF107RF137RF147RF167
RX37RX57RX67RX77RX87RX97RX107RX127RX157
RXF37RXF57RXF67RXF77RXF87RXF97RXF107RXF127RXF157
R series helical gear reducer with hard tooth surface features small size, light weight, high bearing capacity, high efficiency, long service life, convenient installation, wide motor power range, fine transmission ratio classification, etc. It can be widely used in equipment that needs to be decelerated in various industries.
sewage treatment, chemical industry, pharmacy and other industries.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Dureza: | Superfície dentária endurecida |
|---|---|
| Instalação: | Tipo horizontal |
| Layout: | Coaxial |
| Gear Shape: | Cylindrical Gear |
| Etapa: | Single-Step |
| Tipo: | Gear Reducer |
| Exemplos: | US$ 1780/Piece 1 unidade (pedido mínimo) | |
|---|
Calculating Gear Ratio in a Worm Reducer
The gear ratio in a worm reducer is determined by the number of teeth on the worm wheel (also known as the worm gear) and the number of threads on the worm shaft. The gear ratio formula for a worm reducer is:
Gear Ratio = Number of Teeth on Worm Wheel / Number of Threads on Worm Shaft
For example, if the worm wheel has 60 teeth and the worm shaft has a single thread, the gear ratio would be 60:1.
It’s important to note that worm reducers have an inherent self-locking property due to the angle of the worm threads. As a result, the gear ratio also affects the mechanical advantage and the system’s ability to resist backdriving.
When calculating the gear ratio, ensure that the worm reducer is properly designed and that the gear ratio aligns with the desired mechanical characteristics for your application. Additionally, consider factors such as efficiency, load capacity, and speed limitations when selecting a gear ratio for a worm reducer.
Eficiência energética de uma caixa de engrenagens helicoidais: o que esperar
The energy efficiency of a worm gearbox is an important factor to consider when evaluating its performance. Here’s what you can expect in terms of energy efficiency:
- Faixa de eficiência típica: As caixas de engrenagens helicoidais são conhecidas por seu tamanho compacto e alta capacidade de redução de engrenagens, mas podem apresentar menor eficiência energética em comparação com outros tipos de caixas de engrenagens. A eficiência de uma caixa de engrenagens helicoidais normalmente varia de 50% a 90%, dependendo de diversos fatores, como projeto, qualidade de fabricação, lubrificação e condições de carga.
- Perdas inerentes: As caixas de engrenagens helicoidais envolvem inerentemente contato deslizante entre o parafuso sem-fim e a coroa. Esse contato deslizante gera atrito, resultando em perdas de energia na forma de calor. A ação deslizante também contribui para uma menor eficiência quando comparada às caixas de engrenagens com contato rolante.
- Design em forma de serpentina helicoidal: Alguns fabricantes oferecem projetos de caixas de engrenagens helicoidais-sem-fim que combinam elementos de engrenagens helicoidais e sem-fim. Esses projetos visam melhorar a eficiência incorporando engrenagens helicoidais no estágio de redução, o que pode levar a uma maior eficiência em comparação com as caixas de engrenagens sem-fim tradicionais.
- Lubrificação: A lubrificação adequada desempenha um papel significativo na minimização do atrito e na melhoria da eficiência energética. O uso de lubrificantes de alta qualidade e a garantia de que a caixa de engrenagens esteja adequadamente lubrificada podem ajudar a reduzir as perdas por atrito.
- Considerações sobre a candidatura: Embora as caixas de engrenagens helicoidais possam ter menor eficiência energética em comparação com outros tipos de caixas de engrenagens, elas ainda oferecem vantagens em termos de compacidade, alta transmissão de torque e simplicidade. Portanto, a decisão de usar uma caixa de engrenagens helicoidais deve considerar os requisitos específicos da aplicação, incluindo o equilíbrio entre eficiência energética e outros fatores de desempenho.
When selecting a worm gearbox, it’s essential to consider the trade-offs between energy efficiency, torque transmission, gearbox size, and the specific needs of the application. Regular maintenance, proper lubrication, and selecting a well-designed gearbox can contribute to achieving the best possible energy efficiency within the limitations of worm gearbox technology.
How to Select the Right Worm Gearbox for Your Application
Selecting the right worm gearbox for your application involves careful consideration of various factors:
- Load Requirements: Determine the torque and load requirements of your application to ensure the selected gearbox can handle the load without compromising performance.
- Speed Reduction: Calculate the required gear reduction ratio to achieve the desired output speed. Worm gearboxes are known for high reduction ratios.
- Efficiency: Consider the gearbox’s efficiency, as worm gearboxes typically have lower efficiency due to the sliding action. Evaluate whether the efficiency meets your application’s needs.
- Space Constraints: Assess the available space for the gearbox. Worm gearboxes have a compact design, making them suitable for applications with limited space.
- Mounting Options: Determine the mounting orientation and configuration that best suits your application.
- Operating Environment: Consider factors such as temperature, humidity, and exposure to contaminants. Choose a gearbox with appropriate seals and materials to withstand the environment.
- Retaliação: Evaluate the acceptable level of backlash in your application. Worm gearboxes may exhibit more backlash compared to other gear types.
- Travamento automático: If self-locking capability is required, confirm that the selected gearbox can prevent reverse motion without the need for external braking mechanisms.
- Maintenance: Consider the maintenance requirements of the gearbox. Some worm gearboxes require periodic lubrication and maintenance to ensure proper functioning.
- Custo: Balance the features and performance of the gearbox with the overall cost to ensure it aligns with your budget.
Consult with gearbox manufacturers or experts to get recommendations tailored to your specific application. Testing and simulations can also help validate the suitability of a particular gearbox for your needs.
editor by CX 2024-03-04