Produktbeskrivning
Description
HDM De-clutchable wormgear offers simple and reliable manual positioning of the valves, dampers and other quarter-turn devices when overriding existing pneumatic, electric or hydraulic quarter-turn actuators. All unit are suitable for both indoor and outdoor installation. The modular design is to provide the most efficient and effective solution to a full range of manual overriding requirements.
Main Product features
To engage manual operation, first pull out the lock handle and then rotate the clutch lever in anti-clockwise direction until engagement takes place. To return to automatic mode, first pull out the lock handle and then rotate the clutch lever in clockwise.
Remark:The bottom center of the HDM-4 is either F10/F14 or F10/F12
| New Manual Override | Countershaft | Valve Connection | Actuator Connection | ||||||||||
| b1 | N | b2 | M | D1 | 4-M1 | D2 | 4-M2 | E | D3 | 4-Φ1 | D4 | 4-Φ2 | |
| HDM-1 | 14 | 22 | 14 | 16 | Φ50 | 4-M6 | Φ70 | 4-M8 | 70*70 | Φ50 | 4-Φ6.5 | Φ70 | 4-Φ8.5 |
| HDM-2 | 17 | 22 | 17 | 18 | Φ70 | 4-M8 | Φ102 | 4-M10 | 95*95 | Φ70 | 4-Φ8.5 | Φ102 | 4-Φ10.5 |
| HDM-3 | 22 | 28 | 22 | 22 | Φ102 | 4-M10 | Φ125 | 4-M12 | 114*114 | Φ102 | 4-Φ10.5 | Φ125 | 4-Φ12.5 |
| HDM-4 | 27 | 32 | 27 | 30 | Φ102 | 4-M10 | Φ125 | 4-M12 | 129*129 | Φ125 | 4-Φ12.5 | Φ140 | 4-Φ16.5 |
| HDM-5 | 36 | 45 | 36 | 38 | Φ140 | 4-M16 | / | / | 156*156 | Φ140 | 4-Φ17 | Φ165 | 4-Φ21 |
| HDM-6 | 46 | 50 | 46 | 48 | Φ165 | 4-M20 | / | / | 160*160 | Φ165 | 4-Φ22 | / | / |
| New Manual Override | A | B | ΦC | F | T | Y | H | S | K | Förhållande | Rated Input | Rated Onput |
| HDM-1 | 90 | 55 | Φ88 | 115 | 44 | 145 | 120 | 53 | 10 | 26:1 | Nm | 250Nm |
| HDM-2 | 125 | 64 | Φ110 | 135 | 62.5 | 178 | 133 | 56.5 | 13 | 28:1 | Nm | 450Nm |
| HDM-3 | 140 | 71 | Φ129 | 166 | 70 | 212 | 180 | 68.7 | 12.5 | 38:1 | Nm | 700Nm |
| HDM-4 | 188.5 | 93 | Φ174 | 202 | 94 | 280 | 195 | 84 | 15 | 54:1 | Nm | 1200Nm |
| HDM-5 | 222 | 110 | Φ205 | 245 | 110 | 315 | 225 | 92 | 15 | 80:1 | Nm | 2000Nm |
| HDM-6 | 252 | 120 | Φ275 | 280 | 125 | 320 | 252 | 102 | 15 | 78:1 | Nm | 3000Nm |
1. Question:What is your main products?
Answer:Our main products are Pneumatic Actuators, Electric Actuators, Actuated Valves And Valve actuators Accessories..
2. Question:Are you a trader or manufacturer ?
Answer: We are the pneumatic actuators and electric actuators manufacturer , we have ability to do the customization products with experienced team, And we have own factory and production line.
3. Question:How do your make the quality guarantee for actuators?
Answer:We have our own quality control system for incoming and outgoing of the materials, every product will be under controlled and tested before delivery to our customer , and we also provide 18 months guarantee ,beside we provide technical supporting .
4. Question:When can I receive the Price of valve actuators ?
Answer:We will give the Quotation Within 24 hours after we get your inquiry .Or Your can call or message us if it’s quite urgently.
5. Question:How to order our pneumatic actuators and electric actuators ?
Answer:Please send us your inquiry by Email, , etc. we need to know the following informations before giving the formal Quotation.
1) Product information in details, Quantity, Other requirements
2) Delivery time required
6. Question:How can I get a sample to check your quality?
Answer:Contact with our sales expert to arrange the sample delivery. Please send us the details of the sample before placing the order.
7. Question:Shall we pay the sample cost and transportation cost ?
Answer:We will provide the sample by free of charge. Your will bear the freight cost.
8. Question:How long to prepare the sample ?
Answer:Most of our products are under regular production and some of them we keep in stocks.
9. Question:How to delivery the sample to our place?
Answer:Your can provide your forwarders contacts if any, or we will arrange it for you.
10. Question:What about the delivery date if we place the formal order ?
Answer:Usually it takes 15~20days on the production .We know that on-time delivery is very crucial to our customers to meet dead-lines.
We monitor and expedite our supply chain to ensure that we delivery our products to our customers on-time all the time. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Ansökan: | Motor |
|---|---|
| Fungera: | Change Drive Direction, Speed Changing |
| Layout: | Koaxial |
| Hårdhet: | Soft Tooth Surface |
| Installation: | Torque Arm Type |
| Steg: | Dubbelsteg |
| Prover: | US$ 50/Piece 1 styck (minsta beställning) | |
|---|
| Anpassning: | Tillgänglig | Anpassad förfrågan |
|---|
Maintenance Tips for Prolonging the Life of a Worm Gearbox
Proper maintenance is essential to ensure the longevity and reliable performance of a worm gearbox. Here are some maintenance tips to consider:
- Smörjning: Regularly check and replenish the lubricant in the gearbox. Use the recommended lubricant type and quantity specified by the manufacturer.
- Lubrication Schedule: Follow a lubrication schedule based on the operating conditions and manufacturer recommendations. Regular lubrication prevents friction, reduces wear, and dissipates heat.
- Temperature Monitoring: Keep an eye on the operating temperature of the gearbox. Excessive heat can degrade the lubricant and damage components.
- Cleanliness: Keep the gearbox and surrounding area clean from debris and contaminants. Regularly inspect and clean the gearbox exterior.
- Seal Inspection: Check for any leaks or damage to seals and gaskets. Replace them promptly to prevent lubricant leaks and contamination.
- Alignment: Ensure proper alignment between the worm and worm wheel. Misalignment can lead to increased wear and reduced efficiency.
- Torque Monitoring: Monitor the torque levels during operation. Excessive torque can cause overloading and premature wear.
- Regular Inspections: Periodically inspect all components for signs of wear, damage, or unusual noise. Replace worn or damaged parts promptly.
- Proper Usage: Operate the gearbox within its specified limits, including load, speed, and temperature. Avoid overloading or sudden changes in operating conditions.
- Expert Maintenance: If major maintenance or repairs are needed, consult the manufacturer’s guidelines or seek the assistance of qualified technicians.
By following these maintenance tips and adhering to the manufacturer’s recommendations, you can extend the lifespan of your worm gearbox and ensure its optimal performance over time.
Snäckväxlar i transportbandssystem: Fördelar och överväganden
Snäckväxlar spelar en avgörande roll i transportörsystem och erbjuder flera fördelar och överväganden för deras effektiva integration:
- Rymdeffektivitet: Snäckväxlar har en kompakt design, vilket gör dem lämpliga för applikationer med begränsat utrymme, såsom transportbandssystem.
- Höga reduktionsförhållanden: Snäckväxellådan kan uppnå höga utväxlingsförhållanden i ett enda steg, vilket möjliggör lägre transportbandshastigheter utan att offra vridmomentet.
- Självlåsande: Snäckväxlar har inneboende självlåsande egenskaper, vilket förhindrar att transportbandet rör sig när motorn inte aktivt driver det.
- Riktningskontroll: Snäckväxlar underlättar riktningskontroll, vilket gör att transportbandet kan röra sig framåt eller bakåt efter behov.
- Lågt brus: Snäckväxlar producerar ofta lägre ljudnivåer jämfört med andra växellådstyper, vilket bidrar till tystare transportbandsdrift.
Det finns dock också saker att tänka på när man använder snäckväxlar i transportörsystem:
- Effektivitet: Snäckväxlar kan ha lägre mekanisk verkningsgrad jämfört med vissa andra växellådstyper, vilket leder till energiförluster.
- Värmegenerering: Snäckväxlar kan generera mer värme på grund av glidande kontakt mellan snäckan och växeln, vilket kräver lämpliga kylmekanismer.
- Smörjning: Korrekt smörjning är avgörande för att förhindra slitage och säkerställa effektiv drift. Regelbundet underhåll krävs för att övervaka smörjnivåerna.
- Belastning och hastighet: Snäckväxlar är väl lämpade för applikationer med högt vridmoment och låga till måttliga hastighetskrav. De är kanske inte optimala för höghastighetstransportörer.
Before integrating a worm gearbox into a conveyor system, it’s important to carefully consider the specific requirements of the application, including load, speed, space constraints, and efficiency needs. Consulting with gearbox experts and manufacturers can help ensure the right choice for the conveyor’s performance and longevity.
Hur man väljer rätt snäckväxel för din tillämpning
Att välja rätt snäckväxel för din tillämpning innebär noggrant övervägande av olika faktorer:
- Lastkrav: Bestäm vridmoment- och belastningskraven för din applikation för att säkerställa att den valda växellådan kan hantera belastningen utan att kompromissa med prestandan.
- Hastighetsreducering: Beräkna det erforderliga utväxlingsförhållandet för att uppnå önskad utgående hastighet. Snäckväxlar är kända för höga utväxlingsförhållanden.
- Effektivitet: Consider the gearbox’s efficiency, as worm gearboxes typically have lower efficiency due to the sliding action. Evaluate whether the efficiency meets your application’s needs.
- Utrymmesbegränsningar: Bedöm det tillgängliga utrymmet för växellådan. Snäckväxlar har en kompakt design, vilket gör dem lämpliga för applikationer med begränsat utrymme.
- Monteringsalternativ: Bestäm den monteringsorientering och konfiguration som bäst passar din tillämpning.
- Driftsmiljö: Tänk på faktorer som temperatur, luftfuktighet och exponering för föroreningar. Välj en växellåda med lämpliga tätningar och material för att motstå miljön.
- Glapp: Utvärdera den acceptabla nivån av glapp i din tillämpning. Snäckväxlar kan uppvisa mer glapp jämfört med andra kugghjulstyper.
- Självlåsande: Om självlåsande kapacitet krävs, bekräfta att den valda växellådan kan förhindra backning utan behov av externa bromsmekanismer.
- Underhåll: Tänk på växellådans underhållskrav. Vissa snäckväxlar kräver regelbunden smörjning och underhåll för att säkerställa korrekt funktion.
- Kosta: Balansera växellådans funktioner och prestanda med den totala kostnaden för att säkerställa att den överensstämmer med din budget.
Rådfråga växellådstillverkare eller experter för att få rekommendationer skräddarsydda för just din tillämpning. Testning och simuleringar kan också hjälpa till att validera en viss växellådas lämplighet för dina behov.
editor by CX 2024-03-01