مصنوعات کی تفصیل
مصنوعات کی تفصیل
This gearbox is designed for plastic extrusion machine. It meet JB/T9040-1999 standard. The gear is made of high-strength alloy steel and hardened by carburizing and quenching. The accuracy of grinding teeth is higher than Level 6 and the hardness is HRC 54-62. In the front of output shaft,we assemble a thrust bearing with high safety factor to bear the extrusion pressure of screw.
Detailed Photos
| Loading capacity sheet of CHINAMFG and ZSYJ reduction gearboxes | ||||||||||||||||||||
| Type | ZLYJ | ZSYJ | ||||||||||||||||||
| Spec | △ | △ | △ | △ | △ | △ | * | * | * | * | * | * | * | * | * | * | * | * | ||
| 112 | 133 | 146 | 173 | 200 | 225 | 250 | 280 | 315 | 330 | 375 | 395 | 420 | 450 | 500 | 560 | 630 | 450 | 560 | 530 | |
| -8 | -8 | -10 | -12.5 | -12.5 | -16 | -16 | -16 | -16 | -16 | -16 | -16 | -16 | -12 | -20 | -20 | -20 | -32 | -57 | -44 | |
| Normal input power(kw) n=1500rpm | ||||||||||||||||||||
| Ordinary reliable | 15 | 22 | 30.8 | 39 | 55 | 75 | 82.5 | 116 | 171 | _ | 260 | 300 | 315 | 332 | 450 | 600 | 825 | 240 | 240 | 370 |
| High reliable | 10 | 15 | 18.3 | 30.8 | 45 | 60 | 67 | 75 | 116 | 207 | 207 | 240 | 250 | 266 | 350 | 550 | 675 | 200 | 220 | 315 |
| Allowable output torque(N.m) | ||||||||||||||||||||
| Ordinary reliable | 800 | 1165 | 1962 | 2484 | 4379 | 6568 | 7643 | 11822 | 17427 | _ | 26497 | 3571 | 32102 | 38599 | 5571 | 76433 | 105095 | 48917 | 87134 | 103694 |
| High reliable | 525 | 764 | 1165 | 1962 | 3583 | 5334 | 6306 | 7643 | 11822 | 21000 | 21096 | 24380 | 25478 | 33885 | 44566 | 70063 | 85978 | 40764 | 79873 | 88280 |
| Recommended parameters of single-screw extruder machine reduction gearbox(Optional) | ||||||||
| Type | Spec. | Power/Kw | Speed-Input | Speed-Output | Load torque/N.m | Axial force/KN | Screw diameter | Length-Diameter Ratio |
| ZLYJ | 112-8 | 5.5 | 800 | 100 | 525 | 35 | less than 35 | 25:1 |
| 113-8 | 6 | 800 | 100 | 764 | 39 | 50 | 25:1 | |
| 146-10 | 11 | 1000 | 100 | 1050 | 54 | 55 | 25:1 | |
| 173-10 | 18.5 | 900 | 90 | 1962 | 110 | 65 | 25:1 | |
| 200-12.5 | 30 | 1000 | 80 | 3581 | 155 | 75 | 25:1 | |
| 225-12.5 | 45 | 1000 | 80 | 5371 | 180 | 90 | 25:1 | |
| 250-16 | 55 | 1120 | 70 | 7503 | 192 | 105 | 25:1 | |
| 280-16 | 75 | 960 | 60 | 7643 | 258 | 110 | 25:1 | |
| 315-16 | 85 | 960 | 60 | 13528 | 287 | 120 | 25:1 | |
| 330-16 | 110 | 960 | 60 | 17528 | 360 | 135 | 25:1 | |
| 375-16 | 132 | 960 | 60 | 21008 | 390 | 150 | 25:1 | |
| 395-16 | 185 | 960 | 60 | 29442 | 400 | 160 | 25:1 | |
| 420-16 | 160/220 | 960 | 60 | 31831 | 430 | 160/170 | ||
| 450-20 | 213 | 1000 | 60 | 40640 | 500 | 180 | 25:1 | |
| 500-20 | 220 | 1000 | 50 | 42571 | 550 | 180 | 25:1 | |
| 560-17 | 440 | 1000 | 50 | 84034 | 700 | 200 | 25:1 | |
| 630-10 | 540 | 1000 | 50 | 15712 | 770 | 250 | 25:1 | |
| ZSYJ | 450-32 | 200 | 1500 | 47 | 4 0571 | 500 | 165 | 25:1 |
| 560-57 | 220 | 1500 | 26 | 80802 | 700 | 190 | 25:1 | |
Company Profile
Zhe jiang yifan gear box group CO., LTD was set up in 1970. It specializes in developing and producing small and medium-sized marine gearboxes, plastic extruder slowdown bins, Z4 DC motors,generators and so on.There are mainly 300 moreproduction equipments,including more than60 big,fine and expensive ones. The area of our company is 110, 000 square meters.There are 350 staff,and 25%of the total number are the middle and senior technical members. Since the venture,we commit toresearching and developing new products,and keeping improving the technology. We pay great attention to the after-salesservice. All of these efforts increase the developing footsteps of our company. We have strong technical strength , sophisticatedprocessing equipments,advanced products detection equipments,and own a complete security system including productsdesigned,mechanical processing,unit assembly,testing before coming out from the factory and after-sales service. Ourproducts have passed the ISO9001 Quality System Certification.
سرٹیفیکیشنز
Our Advantages
1: High transmission efficiency
2: Smooth operation and low noise
3: Small size and high carrying capacity.
4: Easy to disassemble and easy to install.
FAQ
Q: Are you trading company or manufacturer?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock.
Q: Can we buy 1 pc of each item for quality testing?
A: Yes, we are glad to accept trial order for quality testing.
| درخواست: | Machinery |
|---|---|
| فنکشن: | Speed Reduction |
| لے آؤٹ: | سماکشی |
| سختی: | سخت دانت کی سطح |
| تنصیب: | افقی قسم |
| مرحلہ: | Double-Step |
| نمونے: | US$ 500/Piece 1 ٹکڑا (کم سے کم آرڈر) | |
|---|
Common Problems and Troubleshooting for Worm Gearboxes
Worm gearboxes, like any mechanical component, can experience various issues over time. Here are some common problems that may arise and possible troubleshooting steps:
- Overheating: Overheating can occur due to factors such as inadequate lubrication, excessive loads, or high operating temperatures. Check lubrication levels, ensure proper ventilation, and reduce loads if necessary.
- Noise and Vibration: Excessive noise and vibration may result from misalignment, worn gears, or improper meshing. Check for misalignment, inspect gear teeth for wear, and ensure proper gear meshing.
- Leakage: Oil leakage can be caused by damaged seals or gaskets. Inspect seals and gaskets, and replace them if necessary.
- Reduced Efficiency: Efficiency loss can occur due to friction, wear, or misalignment. Regularly monitor gearbox performance, ensure proper lubrication, and address any wear or misalignment issues.
- Backlash: Excessive backlash can affect precision and accuracy. Adjust gear meshing and reduce backlash to improve performance.
- Seizure or Binding: Seizure or binding can result from inadequate lubrication, debris, or misalignment. Clean the gearbox, ensure proper lubrication, and address misalignment issues.
- Worn Gears: Worn gear teeth can lead to poor performance. Regularly inspect gears for signs of wear, and replace worn gears as needed.
- Seal Wear: Seals can wear over time, leading to leakage and contamination. Inspect seals regularly and replace them if necessary.
If you encounter any of these problems, it’s important to address them promptly to prevent further damage and maintain the performance of your worm gearbox. Regular maintenance, proper lubrication, and addressing issues early can help extend the lifespan and reliability of the gearbox.
روبوٹکس اور آٹومیشن میں ورم گیئر باکس ایپلی کیشنز
ورم گیئر باکس اپنی منفرد خصوصیات اور فوائد کی وجہ سے مختلف روبوٹکس اور آٹومیشن ایپلی کیشنز میں اہم کردار ادا کرتے ہیں۔ یہاں کچھ عام ایپلی کیشنز ہیں جہاں کیڑا گیئر باکس استعمال کیا جاتا ہے:
- روبوٹک بازو کی حرکت: Worm gearboxes are employed in robotic arms to provide precise and controlled movement. The self-locking property of worm gearboxes helps maintain the arm’s position without requiring additional brakes.
- کنویئر سسٹمز: خودکار پروڈکشن لائنوں میں، ورم گیئر باکسز کو کنویئر بیلٹ چلانے اور مواد یا مصنوعات کو درستگی کے ساتھ اسمبلی لائنوں کے ساتھ منتقل کرنے کے لیے استعمال کیا جاتا ہے۔
- درستگی پوزیشننگ: ورم گیئر باکس درست پوزیشننگ سسٹمز میں استعمال ہوتے ہیں، جیسے کہ پک اینڈ پلیس روبوٹس اور CNC مشینوں میں پائے جاتے ہیں۔ وہ درست اور دوبارہ قابل نقل حرکت کو یقینی بناتے ہیں۔
- پین اور جھکاؤ میکانزم: ورم گیئر باکسز کو پین اور ٹائل میکانزم میں سرویلنس کیمروں، روبوٹک کیمروں اور سینسروں میں استعمال کیا جاتا ہے۔ سیلف لاکنگ فیچر مطلوبہ زاویہ کو مستحکم اور برقرار رکھنے میں مدد کرتا ہے۔
- خودکار دروازے اور دروازے: ورم گیئر باکسز کو خودکار گیٹ اور ڈور سسٹم میں استعمال کیا جاتا ہے تاکہ ان کے کھلنے اور بند ہونے کی نقل و حرکت کو آسانی سے اور محفوظ طریقے سے کنٹرول کیا جا سکے۔
- مواد کی ہینڈلنگ: گوداموں اور تقسیم کے مراکز میں روبوٹ اشیاء کو ہیرا پھیری اور اٹھانے کے لیے ورم گیئر باکس کا استعمال کرتے ہیں، جس سے مواد کو سنبھالنے میں کارکردگی میں اضافہ ہوتا ہے۔
- میڈیکل روبوٹکس: جراحی کے طریقہ کار، تشخیصی آلات، اور بحالی کے آلات کے لیے طبی روبوٹس میں ورم گیئر باکس استعمال کیے جاتے ہیں، جو درست اور کنٹرول شدہ حرکات کو یقینی بناتے ہیں۔
- صنعتی روبوٹ: صنعتی روبوٹ مختلف کاموں کے لیے کیڑے کے گیئر باکسز پر انحصار کرتے ہیں، بشمول ویلڈنگ، پینٹنگ، اسمبلی، اور پیکیجنگ، جہاں درست حرکت ضروری ہے۔
- خودکار جانچ کا سامان: جانچ اور معائنہ کی ایپلی کیشنز میں، کیڑا گیئر باکس درست جانچ اور پیمائش کے لیے ضروری حرکت اور پوزیشننگ فراہم کرتے ہیں۔
- خوراک اور مشروبات کی صنعت: ورم گیئر باکسز خودکار فوڈ پروسیسنگ اور پیکیجنگ سسٹم میں استعمال ہوتے ہیں، جو مصنوعات کی صحت مند اور درست نقل و حرکت کو یقینی بناتے ہیں۔
ان ایپلی کیشنز میں ورم گیئر باکسز کو ان کے کمپیکٹ سائز، زیادہ ٹارک آؤٹ پٹ، سیلف لاکنگ فیچر، اور رائٹ اینگل ڈرائیو فراہم کرنے کی صلاحیت کی وجہ سے ترجیح دی جاتی ہے۔ تاہم، صحیح گیئر باکس کو منتخب کرنے کے لیے بوجھ، رفتار، کارکردگی، اور ماحولیاتی حالات جیسے عوامل پر غور کرنے کی ضرورت ہے۔
How to Select the Right Worm Gearbox for Your Application
Selecting the right worm gearbox for your application involves careful consideration of various factors:
- Load Requirements: Determine the torque and load requirements of your application to ensure the selected gearbox can handle the load without compromising performance.
- Speed Reduction: Calculate the required gear reduction ratio to achieve the desired output speed. Worm gearboxes are known for high reduction ratios.
- Efficiency: Consider the gearbox’s efficiency, as worm gearboxes typically have lower efficiency due to the sliding action. Evaluate whether the efficiency meets your application’s needs.
- Space Constraints: Assess the available space for the gearbox. Worm gearboxes have a compact design, making them suitable for applications with limited space.
- Mounting Options: Determine the mounting orientation and configuration that best suits your application.
- Operating Environment: Consider factors such as temperature, humidity, and exposure to contaminants. Choose a gearbox with appropriate seals and materials to withstand the environment.
- Backlash: Evaluate the acceptable level of backlash in your application. Worm gearboxes may exhibit more backlash compared to other gear types.
- Self-Locking: If self-locking capability is required, confirm that the selected gearbox can prevent reverse motion without the need for external braking mechanisms.
- Maintenance: Consider the maintenance requirements of the gearbox. Some worm gearboxes require periodic lubrication and maintenance to ensure proper functioning.
- Cost: Balance the features and performance of the gearbox with the overall cost to ensure it aligns with your budget.
Consult with gearbox manufacturers or experts to get recommendations tailored to your specific application. Testing and simulations can also help validate the suitability of a particular gearbox for your needs.
editor by CX 2023-09-22