WPAWPSWPXWPO 60100 Ratio worm gear speed reducer

Tổng quan

Thông tin nhanh

Nơi xuất xứ:

Chiết Giang, Trung Quốc

Tên thương hiệu:

EPT

Mã số sản phẩm:

WPA

Công suất định mức:

0.06-15KW

Cơ cấu bánh răng:

Sâu

Mô-men xoắn đầu ra:

2.6-1195N.M

Tốc độ đầu vào:

1450 Rpm

Tốc độ đầu ra:

14-280r/min

The quality of:

High quality roller chain,

Product Keywords:

boston gear spur gear

Khả năng cung ứng

Khả năng cung ứng:

10000 Piece/Pieces per Month

Đóng gói & Giao hàng

Chi tiết đóng gói

The cartons

Cảng

shanghai

Tùy chỉnh trực tuyến

Mô tả sản phẩm

WPA/WPS/WPX/WPO 60/100 Ratio worm gear speed reducer

WP series reducer, the worm is made of 45# high quality steel after heat treatment, the worm wheel is cast with tin bronze, the wear-resisting performance is good, especially on the bearing capacity is more obvious, mainly applicable to plastic, metallurgy, beverage, mine, lifting transportation, chemical construction and other mechanical equipment speed reduction drive.

A.Features:

1. Stable transmission, low vibration, impact and noise, large reduction ratio, wide versatility and suitable for use with various mechanical equipment.

2. Large transmission ratio can be obtained by single-stage transmission, with compact structure. Most reducers have good self-locking property, and can save the brake device for mechanical equipment with brake requirements.

3. The meshing friction loss between worm screw teeth and worm gear surface is relatively large, so the transmission efficiency is lower than that of gear, and it is easy to be heated and the temperature is higher.

4. Higher requirements for lubrication and cooling.

5. Good interfitting. The worm and worm are manufactured in accordance with national standards.

B.Operating conditions:

1. The speed of worm reducer should not exceed 1500r/min.,

2.working environment temperature for -40 ℃ to + 40 ℃, when working environment temperature is lower than 0 ℃, lubricating oil must be heated before starting to more than 0 ℃, when working environment temperature is higher than 40 ℃, the cooling measures must be taken.

3. The feeding shaft of the worm gear reducer can rotate positively or negatively.

C.Notice:

1. The worm gear shaft must not be used as input shaft.

2. The machine does not pump oil at the factory. Sufficient mechanical oil must be added before operation.

3. The supporting motor (i.e. power) shall not exceed the value specified in the sign.

4. If the user wants to change the direction of entering the shaft, remove the lower end cover of the shaft, take out the worm shaft and adjust 180.Load it.Press install not hard knock, can slowly drive the two shafts, make it mesh.

Producet structure

Size table

Technology Data

Kiểu:		WP gearbox
Người mẫu:		WP 40-250
Tỷ lệ:		1:10,15,20,25,30,40,50,60,200,300,400,500,600,800,900,1200,1500,1800,2400,2500,3000,3600
Màu sắc:		Xanh lam/Bạc hoặc theo yêu cầu của khách hàng
Vật liệu:		Housing: Die-Cast Iron cast
		Worm Gear-Copper-10-3#
		Worm-20CrMn Ti with carburizing and quenching, surface harness is 56-62HRC
		Shaft-chromium steel-45#
Đóng gói:		Thùng carton và hộp gỗ
Vòng bi:		Vòng bi C&U
Niêm phong:		NAK SKF
Bảo hành:		one year
Input Power:		0.06KW,0.09KW,1.1KW,1.5KW 2.2KW,3KW,4KW,5.5KW,7.5KW
Cách sử dụng:		Industrial Machine: Food Stuff, Ceramics,CHEMICAL,Packing,Dyeing,Woodworking,Glass.
IEC Flange:		56B14, 63B14, 63B5, 63B5, 71B14,80B14 AND SO ON

Product show

Sản phẩm liên quan

Câu hỏi thường gặp

Hỏi: Bạn là công ty thương mại hay nhà sản xuất?

A: We are factory.

Hỏi: Thời gian giao hàng của bạn là bao lâu?

A: Generally it is 7-15 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it will depend on order quantity.

Hỏi: Các bạn có cung cấp mẫu thử không? Mẫu thử miễn phí hay tính phí?

A: Yes, we could offer the sample, need to charge sample cost and freight charge.

Hỏi: Điều khoản thanh toán của bạn là gì?

A: Thanh toán = 1000 USD, 30% T/T trả trước, số dư thanh toán trước khi giao hàng.

Nếu bạn có bất kỳ câu hỏi nào khác, vui lòng liên hệ với chúng tôi theo thông tin bên dưới: