China high quality Nmrv Series Aluminum&Cast Iron Worm Gearbox bevel gearbox

产品描述

High Rpm RV series Aluminum Alloy Worm Gear box NMRV 571-150 Reducer Variable Wheel Drive Speed Reduction Worm Gearbox

产品参数

规格

Type	Worm Gearbox/Worm Gear Speed Reducer
模型	NMRV:571,030,040,050,063,075,090,110,130,150
Center distance	25-150mm
比率	5,7.5,10,15,20,25,30,40,50,60,80,100
Torque	1.8-1800Nm
Motor	2 pole, 4 pole, 6 pole
Mounting position	Omnidirectional
颜色	Blue/Silver grey Or On request
材料	NMRV571~090:Aluminum alloy; NMRV110~150 Cast iron

细节

Multiple inputs and outputs

Feature
1. Mad of high-quality aluminum alloy,light weight and non-rusting
2. Large output torque
3. Smooth in running and low in noise,can work long time in dreadful conditions.
4. High in radiating efficiency.
5. Good-looking in appearance,durable in service life and small in volume.
6. Suitable for omnibearing installation.

contact-info.html

模型	NMRV571, NMRV030, NMRV040, NMRV050, NMRV063, NMRV075, NMRV090, NMRV110, NMRV130, NMRV150
比率	5,7.5,10,15,20,25,30,40,50,60,80,100
输出扭矩	1.8-1760Nm
Application	Machinery Industry
Input Speed	900-2800RPM
Output Speed	10-250RPM
材料	Housing: Size 25-110 Is Aluminum Alloy, Size 110-150 Is Cast-Iron
	Worm Wheel: ZCuSn10Pb1
	Worm:20Cr
	Pinion:Tin Bronze
	Output Shaft: Steel-45#
IEC Flange	IEC Standard Flange Or On Customer Request

详细照片

硬度：	硬化的牙面
安装：	90度
布局：	扩张
齿轮形状：	锥齿轮
步：	单步
类型：	齿轮减速器

示例：	Maintenance Tips for Prolonging the Life of a Worm Gearbox Proper maintenance is essential to ensure the longevity and reliable performance of a worm gearbox. Here are some maintenance tips to consider: 润滑： Regularly check and replenish the lubricant in the gearbox. Use the recommended lubricant type and quantity specified by the manufacturer. Lubrication Schedule: Follow a lubrication schedule based on the operating conditions and manufacturer recommendations. Regular lubrication prevents friction, reduces wear, and dissipates heat. Temperature Monitoring: Keep an eye on the operating temperature of the gearbox. Excessive heat can degrade the lubricant and damage components. 清洁度： Keep the gearbox and surrounding area clean from debris and contaminants. Regularly inspect and clean the gearbox exterior. Seal Inspection: Check for any leaks or damage to seals and gaskets. Replace them promptly to prevent lubricant leaks and contamination. Alignment: Ensure proper alignment between the worm and worm wheel. Misalignment can lead to increased wear and reduced efficiency. Torque Monitoring: Monitor the torque levels during operation. Excessive torque can cause overloading and premature wear. Regular Inspections: Periodically inspect all components for signs of wear, damage, or unusual noise. Replace worn or damaged parts promptly. Proper Usage: Operate the gearbox within its specified limits, including load, speed, and temperature. Avoid overloading or sudden changes in operating conditions. Expert Maintenance: If major maintenance or repairs are needed, consult the manufacturer’s guidelines or seek the assistance of qualified technicians. By following these maintenance tips and adhering to the manufacturer’s recommendations, you can extend the lifespan of your worm gearbox and ensure its optimal performance over time. US$ 30/Piece 1 件（最低订购量） \| 索取样品

示例：

Maintenance Tips for Prolonging the Life of a Worm Gearbox

Proper maintenance is essential to ensure the longevity and reliable performance of a worm gearbox. Here are some maintenance tips to consider:

润滑： Regularly check and replenish the lubricant in the gearbox. Use the recommended lubricant type and quantity specified by the manufacturer.
Lubrication Schedule: Follow a lubrication schedule based on the operating conditions and manufacturer recommendations. Regular lubrication prevents friction, reduces wear, and dissipates heat.
Temperature Monitoring: Keep an eye on the operating temperature of the gearbox. Excessive heat can degrade the lubricant and damage components.
清洁度： Keep the gearbox and surrounding area clean from debris and contaminants. Regularly inspect and clean the gearbox exterior.
Seal Inspection: Check for any leaks or damage to seals and gaskets. Replace them promptly to prevent lubricant leaks and contamination.
Alignment: Ensure proper alignment between the worm and worm wheel. Misalignment can lead to increased wear and reduced efficiency.
Torque Monitoring: Monitor the torque levels during operation. Excessive torque can cause overloading and premature wear.
Regular Inspections: Periodically inspect all components for signs of wear, damage, or unusual noise. Replace worn or damaged parts promptly.
Proper Usage: Operate the gearbox within its specified limits, including load, speed, and temperature. Avoid overloading or sudden changes in operating conditions.
Expert Maintenance: If major maintenance or repairs are needed, consult the manufacturer’s guidelines or seek the assistance of qualified technicians.

By following these maintenance tips and adhering to the manufacturer’s recommendations, you can extend the lifespan of your worm gearbox and ensure its optimal performance over time.

US$ 30/Piece
1 件（最低订购量）

|
索取样品

蜗轮蜗杆减速器能提供高扭矩输出吗？

是的，蜗轮蜗杆减速器凭借其独特的设计和工作原理，能够提供高扭矩输出。蜗轮蜗杆以其强大的扭矩倍增能力而闻名，使其适用于需要大扭矩传递的应用。

蜗轮蜗杆减速器的扭矩输出受以下几个因素影响：

前掠角： 蜗杆的导程角会影响齿轮系统的机械优势。较大的导程角可以产生更高的扭矩输出。
蠕虫直径： 直径较大的蜗杆可以提供更大的扭矩输出，因为它与齿轮的接触面积更大。
齿轮比： 蜗轮蜗杆与齿轮之间的传动比决定了扭矩放大倍数。传动比越高，扭矩输出越大。
润滑： 适当的润滑对于减少摩擦和确保有效的扭矩传递至关重要。
材质和质量： High-quality materials and precision manufacturing contribute to the gearbox’s ability to handle high torque loads.

Due to their ability to provide high torque output in a compact form factor, worm gearboxes are commonly used in various industr

蜗轮减速器在机器人和自动化领域的应用

蜗轮减速器因其独特的特性和优势，在各种机器人和自动化应用中发挥着至关重要的作用。以下是一些蜗轮减速器的常见应用：

机械臂运动： Worm gearboxes are employed in robotic arms to provide precise and controlled movement. The self-locking property of worm gearboxes helps maintain the arm’s position without requiring additional brakes.
输送系统： 在自动化生产线中，蜗轮减速器用于驱动传送带，并精确地沿着装配线移动物料或产品。
精确定位： 蜗轮蜗杆减速器用于精密定位系统，例如取放机器人和数控机床中的定位系统。它们能确保运动的精确性和可重复性。
云台机构： 蜗轮蜗杆减速器广泛应用于监控摄像机、机器人摄像机和传感器的云台机构中。其自锁功能有助于稳定并保持所需的角度。
自动门： 蜗轮蜗杆减速器用于自动门系统中，以平稳安全地控制其开启和关闭运动。
物料搬运： 仓库和配送中心的机器人使用蜗轮蜗杆箱来操作和提升物体，从而提高物料搬运效率。
医疗机器人： 蜗轮减速器被应用于医疗机器人的外科手术、诊断设备和康复设备中，以确保精确可控的运动。
工业机器人： 工业机器人依靠蜗轮减速器来完成各种任务，包括焊接、喷漆、装配和包装，在这些任务中，精确的运动至关重要。
自动化测试设备： 在测试和检验应用中，蜗轮蜗杆箱可提供必要的运动和定位，以实现精确的测试和测量。
食品饮料行业： 蜗轮减速器用于自动化食品加工和包装系统，确保产品卫生、精确地移动。