Descrizione del prodotto
Description
HDM De-clutchable wormgear offers simple and reliable manual positioning of the valves, dampers and other quarter-turn devices when overriding existing pneumatic, electric or hydraulic quarter-turn actuators. All unit are suitable for both indoor and outdoor installation. The modular design is to provide the most efficient and effective solution to a full range of manual overriding requirements.
Main Product features
To engage manual operation, first pull out the lock handle and then rotate the clutch lever in anti-clockwise direction until engagement takes place. To return to automatic mode, first pull out the lock handle and then rotate the clutch lever in clockwise.
Remark:The bottom center of the HDM-4 is either F10/F14 or F10/F12
| New Manual Override | Countershaft | Valve Connection | Actuator Connection | ||||||||||
| b1 | N | b2 | M | D1 | 4-M1 | D2 | 4-M2 | E | D3 | 4-Φ1 | D4 | 4-Φ2 | |
| HDM-1 | 14 | 22 | 14 | 16 | Φ50 | 4-M6 | Φ70 | 4-M8 | 70*70 | Φ50 | 4-Φ6.5 | Φ70 | 4-Φ8.5 |
| HDM-2 | 17 | 22 | 17 | 18 | Φ70 | 4-M8 | Φ102 | 4-M10 | 95*95 | Φ70 | 4-Φ8.5 | Φ102 | 4-Φ10.5 |
| HDM-3 | 22 | 28 | 22 | 22 | Φ102 | 4-M10 | Φ125 | 4-M12 | 114*114 | Φ102 | 4-Φ10.5 | Φ125 | 4-Φ12.5 |
| HDM-4 | 27 | 32 | 27 | 30 | Φ102 | 4-M10 | Φ125 | 4-M12 | 129*129 | Φ125 | 4-Φ12.5 | Φ140 | 4-Φ16.5 |
| HDM-5 | 36 | 45 | 36 | 38 | Φ140 | 4-M16 | / | / | 156*156 | Φ140 | 4-Φ17 | Φ165 | 4-Φ21 |
| HDM-6 | 46 | 50 | 46 | 48 | Φ165 | 4-M20 | / | / | 160*160 | Φ165 | 4-Φ22 | / | / |
| New Manual Override | A | B | ΦC | F | T | Y | H | S | K | Rapporto | Rated Input | Rated Onput |
| HDM-1 | 90 | 55 | Φ88 | 115 | 44 | 145 | 120 | 53 | 10 | 26:1 | Nm | 250Nm |
| HDM-2 | 125 | 64 | Φ110 | 135 | 62.5 | 178 | 133 | 56.5 | 13 | 28:1 | Nm | 450Nm |
| HDM-3 | 140 | 71 | Φ129 | 166 | 70 | 212 | 180 | 68.7 | 12.5 | 38:1 | Nm | 700Nm |
| HDM-4 | 188.5 | 93 | Φ174 | 202 | 94 | 280 | 195 | 84 | 15 | 54:1 | Nm | 1200Nm |
| HDM-5 | 222 | 110 | Φ205 | 245 | 110 | 315 | 225 | 92 | 15 | 80:1 | Nm | 2000Nm |
| HDM-6 | 252 | 120 | Φ275 | 280 | 125 | 320 | 252 | 102 | 15 | 78:1 | Nm | 3000Nm |
1. Question:What is your main products?
Answer:Our main products are Pneumatic Actuators, Electric Actuators, Actuated Valves And Valve actuators Accessories..
2. Question:Are you a trader or manufacturer ?
Answer: We are the pneumatic actuators and electric actuators manufacturer , we have ability to do the customization products with experienced team, And we have own factory and production line.
3. Question:How do your make the quality guarantee for actuators?
Answer:We have our own quality control system for incoming and outgoing of the materials, every product will be under controlled and tested before delivery to our customer , and we also provide 18 months guarantee ,beside we provide technical supporting .
4. Question:When can I receive the Price of valve actuators ?
Answer:We will give the Quotation Within 24 hours after we get your inquiry .Or Your can call or message us if it’s quite urgently.
5. Question:How to order our pneumatic actuators and electric actuators ?
Answer:Please send us your inquiry by Email, , etc. we need to know the following informations before giving the formal Quotation.
1) Product information in details, Quantity, Other requirements
2) Delivery time required
6. Question:How can I get a sample to check your quality?
Answer:Contact with our sales expert to arrange the sample delivery. Please send us the details of the sample before placing the order.
7. Question:Shall we pay the sample cost and transportation cost ?
Answer:We will provide the sample by free of charge. Your will bear the freight cost.
8. Question:How long to prepare the sample ?
Answer:Most of our products are under regular production and some of them we keep in stocks.
9. Question:How to delivery the sample to our place?
Answer:Your can provide your forwarders contacts if any, or we will arrange it for you.
10. Question:What about the delivery date if we place the formal order ?
Answer:Usually it takes 15~20days on the production .We know that on-time delivery is very crucial to our customers to meet dead-lines.
We monitor and expedite our supply chain to ensure that we delivery our products to our customers on-time all the time. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Applicazione: | Motor |
|---|---|
| Funzione: | Change Drive Direction, Speed Changing |
| Disposizione: | Coassiale |
| Durezza: | Soft Tooth Surface |
| Installazione: | Tipo di braccio di torsione |
| Fare un passo: | Doppio passo |
| Esempi: | US$ 50/Pezzo 1 pezzo (ordine minimo) | |
|---|
| Personalizzazione: | Disponibile | Richiesta personalizzata |
|---|
Maintenance Tips for Prolonging the Life of a Worm Gearbox
Proper maintenance is essential to ensure the longevity and reliable performance of a worm gearbox. Here are some maintenance tips to consider:
- Lubrificazione: Regularly check and replenish the lubricant in the gearbox. Use the recommended lubricant type and quantity specified by the manufacturer.
- Lubrication Schedule: Follow a lubrication schedule based on the operating conditions and manufacturer recommendations. Regular lubrication prevents friction, reduces wear, and dissipates heat.
- Temperature Monitoring: Keep an eye on the operating temperature of the gearbox. Excessive heat can degrade the lubricant and damage components.
- Cleanliness: Keep the gearbox and surrounding area clean from debris and contaminants. Regularly inspect and clean the gearbox exterior.
- Seal Inspection: Check for any leaks or damage to seals and gaskets. Replace them promptly to prevent lubricant leaks and contamination.
- Alignment: Ensure proper alignment between the worm and worm wheel. Misalignment can lead to increased wear and reduced efficiency.
- Torque Monitoring: Monitor the torque levels during operation. Excessive torque can cause overloading and premature wear.
- Regular Inspections: Periodically inspect all components for signs of wear, damage, or unusual noise. Replace worn or damaged parts promptly.
- Proper Usage: Operate the gearbox within its specified limits, including load, speed, and temperature. Avoid overloading or sudden changes in operating conditions.
- Expert Maintenance: If major maintenance or repairs are needed, consult the manufacturer’s guidelines or seek the assistance of qualified technicians.
By following these maintenance tips and adhering to the manufacturer’s recommendations, you can extend the lifespan of your worm gearbox and ensure its optimal performance over time.
Riduttori a vite senza fine nei sistemi di trasporto: vantaggi e considerazioni
I riduttori a vite senza fine svolgono un ruolo cruciale nei sistemi di trasporto, offrendo numerosi vantaggi e considerazioni per una loro efficace integrazione:
- Efficienza dello spazio: I riduttori a vite senza fine hanno un design compatto, che li rende adatti ad applicazioni con spazio limitato, come i sistemi di trasporto.
- Elevati rapporti di riduzione: I riduttori a vite senza fine possono raggiungere elevati rapporti di riduzione in un singolo stadio, consentendo velocità di trasporto inferiori senza sacrificare la coppia.
- Autobloccante: I riduttori a vite senza fine possiedono intrinseche proprietà di autobloccaggio, che impediscono al nastro trasportatore di muoversi quando il motore non lo aziona attivamente.
- Controllo direzionale: I riduttori a vite senza fine facilitano il controllo direzionale, consentendo al nastro trasportatore di muoversi in avanti o indietro a seconda delle necessità.
- Basso rumore: I riduttori a vite senza fine spesso producono livelli di rumorosità inferiori rispetto ad altri tipi di riduttori, contribuendo a un funzionamento più silenzioso del nastro trasportatore.
Tuttavia, è necessario tenere a mente anche alcuni aspetti da considerare quando si utilizzano riduttori a vite senza fine nei sistemi di trasporto:
- Efficienza: I riduttori a vite senza fine possono avere un'efficienza meccanica inferiore rispetto ad altri tipi di riduttori, con conseguenti perdite di energia.
- Generazione di calore: I riduttori a vite senza fine possono generare più calore a causa del contatto di scorrimento tra la vite senza fine e l'ingranaggio, rendendo necessari adeguati meccanismi di raffreddamento.
- Lubrificazione: Una lubrificazione adeguata è fondamentale per prevenire l'usura e garantire un funzionamento efficiente. È necessaria una manutenzione regolare per monitorare i livelli di lubrificazione.
- Carico e velocità: I riduttori a vite senza fine sono adatti per applicazioni con coppia elevata e velocità da basse a moderate. Potrebbero non essere ottimali per nastri trasportatori ad alta velocità.
Before integrating a worm gearbox into a conveyor system, it’s important to carefully consider the specific requirements of the application, including load, speed, space constraints, and efficiency needs. Consulting with gearbox experts and manufacturers can help ensure the right choice for the conveyor’s performance and longevity.
Come scegliere il riduttore a vite senza fine più adatto alla propria applicazione
La scelta del riduttore a vite senza fine più adatto alla propria applicazione richiede un'attenta valutazione di diversi fattori:
- Requisiti di carico: Determina i requisiti di coppia e carico della tua applicazione per assicurarti che il riduttore selezionato sia in grado di gestire il carico senza compromettere le prestazioni.
- Riduzione della velocità: Calcola il rapporto di riduzione necessario per ottenere la velocità di uscita desiderata. I riduttori a vite senza fine sono noti per gli elevati rapporti di riduzione.
- Efficienza: Consider the gearbox’s efficiency, as worm gearboxes typically have lower efficiency due to the sliding action. Evaluate whether the efficiency meets your application’s needs.
- Vincoli di spazio: Valutare lo spazio disponibile per il riduttore. I riduttori a vite senza fine hanno un design compatto, che li rende adatti ad applicazioni con spazio limitato.
- Opzioni di montaggio: Determina l'orientamento e la configurazione di montaggio più adatti alla tua applicazione.
- Ambiente operativo: Considera fattori quali temperatura, umidità ed esposizione a contaminanti. Scegli un riduttore con guarnizioni e materiali adeguati a resistere all'ambiente.
- Gioco: Valutate il livello di gioco accettabile nella vostra applicazione. I riduttori a vite senza fine possono presentare un gioco maggiore rispetto ad altri tipi di ingranaggi.
- Autobloccante: Se è richiesta la funzionalità di autobloccaggio, verificare che il cambio selezionato sia in grado di impedire la retromarcia senza bisogno di meccanismi di frenatura esterni.
- Manutenzione: Considera le esigenze di manutenzione del riduttore. Alcuni riduttori a vite senza fine richiedono lubrificazione e manutenzione periodiche per garantire un funzionamento corretto.
- Costo: Valuta attentamente le caratteristiche e le prestazioni del cambio, tenendo conto del costo complessivo, per assicurarti che rientri nel tuo budget.
Consultate i produttori di riduttori o esperti per ottenere raccomandazioni specifiche per la vostra applicazione. Anche test e simulazioni possono contribuire a verificare l'idoneità di un determinato riduttore alle vostre esigenze.
editor by CX 2024-03-01