製品説明
製品パラメータ
S series geared motor speed reducer with 90 Degree Gear box
Components:
1. Housing: Cast Iron
2. Gears: Helical-worm Gears
3. Input Configurations: Equipped with Electric Motors
Solid Shaft Input, IEC-normalized Motor Flange
4. Applicable Motors:
Single Phase AC Motor, Three Phase AC Motor
Brake Motors, Inverter Motors
Multi-speed Motors, Explosion-proof Motor
Roller Motor
5. Output Configurations: CHINAMFG Shaft Output
Hollow Shaft Output.
Features:
1. Modular design, compact structure
2. Low noise
3. Hollow output shaft with keyed connection, shrink disk, or torque arm
4. Can be combined with other types of gearboxes (Such as R Series, UDL Series)
| Models | Output Shaft Dia. | Input Shaft Dia. | Power(kW) | 比率 | Max. Torque(Nm) | |
| Solid Shaft | Hollow Shaft | |||||
| S38 | 20mm | 20mm | 16mm | 0.18~0.75 | 10.27~152 | 90 |
| S48 | 25mm | 25/30mm | 16mm | 0.18~1.5 | 11.46~244.74 | 170 |
| S58 | 30mm | 30/35mm | 16mm | 0.18~3 | 10.78~196.21 | 295 |
| S68 | 35mm | 40/45mm | 19mm | 0.25~5.5 | 11.55~22 | 520 |
| S78 | 45mm | 50/60mm | 24mm | 0.55~7.5 | 9.96~241.09 | 1270 |
| S88 | 60mm | 60/70mm | 28mm | 0.75~15 | 11.83~222 | 2280 |
| S98 | 70mm | 70/90mm | 38mm | 1.5~22 | 12.75~230.48 | 4000 |
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| 硬度： | 硬化した歯面 |
|---|---|
| インストール: | 90度 |
| レイアウト: | 拡大 |
| ギア形状： | ベベルギア |
| ステップ： | シングルステップ |
| タイプ： | 減速機 |
| サンプル： | US$ 150/個 1個（最小注文数） | |
|---|
What are the Noise Levels Associated with Worm Gearboxes?
The noise levels associated with worm gearboxes can vary depending on several factors, including the design, quality, operating conditions, and maintenance of the gearbox. Here are some key points to consider:
- Design and Quality: Well-designed and high-quality worm gearboxes tend to produce lower noise levels. Factors such as gear tooth profile, precision manufacturing, and proper alignment can contribute to reduced noise.
- Gear Engagement: The way the worm and worm wheel engage and mesh with each other can impact noise levels. Proper tooth contact and alignment can help minimize noise during operation.
- 潤滑： Inadequate or improper lubrication can lead to increased friction and wear, resulting in higher noise levels. Using the recommended lubricant and maintaining proper lubrication levels are important for noise reduction.
- Operating Conditions: Operating the gearbox within its specified load and speed limits can help prevent excessive noise generation. Overloading or operating at high speeds beyond the gearbox’s capabilities can lead to increased noise.
- 反発： Excessive backlash or play between the gear teeth can lead to impact noise as the teeth engage. Proper backlash adjustment can help mitigate this issue.
- メンテナンス： Regular maintenance, including gear inspection, lubrication checks, and addressing any wear or damage, can help keep noise levels in check.
It’s important to note that while worm gearboxes can produce some noise due to the nature of gear meshing, proper design, maintenance, and operation can significantly reduce noise levels. If noise is a concern for your application, consulting with gearbox manufacturers and experts can provide insights into selecting the right gearbox type and implementing measures to minimize noise.
Energy Efficiency of a Worm Gearbox: What to Expect
The energy efficiency of a worm gearbox is an important factor to consider when evaluating its performance. Here’s what you can expect in terms of energy efficiency:
- Typical Efficiency Range: Worm gearboxes are known for their compact size and high gear reduction capabilities, but they can exhibit lower energy efficiency compared to other types of gearboxes. The efficiency of a worm gearbox typically falls in the range of 50% to 90%, depending on various factors such as design, manufacturing quality, lubrication, and load conditions.
- Inherent Losses: Worm gearboxes inherently involve sliding contact between the worm and worm wheel. This sliding contact generates friction, leading to energy losses in the form of heat. The sliding action also contributes to lower efficiency when compared to gearboxes with rolling contact.
- Helical-Worm Design: Some manufacturers offer helical-worm gearbox designs that combine elements of helical and worm gearing. These designs aim to improve efficiency by incorporating helical gears in the reduction stage, which can lead to higher efficiency compared to traditional worm gearboxes.
- 潤滑： Proper lubrication plays a significant role in minimizing friction and improving energy efficiency. Using high-quality lubricants and ensuring the gearbox is adequately lubricated can help reduce losses due to friction.
- Application Considerations: While worm gearboxes might have lower energy efficiency compared to other types of gearboxes, they still offer advantages in terms of compactness, high torque transmission, and simplicity. Therefore, the decision to use a worm gearbox should consider the specific requirements of the application, including the trade-off between energy efficiency and other performance factors.
When selecting a worm gearbox, it’s essential to consider the trade-offs between energy efficiency, torque transmission, gearbox size, and the specific needs of the application. Regular maintenance, proper lubrication, and selecting a well-designed gearbox can contribute to achieving the best possible energy efficiency within the limitations of worm gearbox technology.
ウォームギアボックスは高トルク出力を実現できますか？
はい、ウォームギアボックスは、その独自の設計と動作原理により、高いトルク出力を実現できます。ウォームギアは高いトルク増幅能力で知られており、大きなトルク伝達を必要とする用途に適しています。
ウォームギアボックスのトルク出力は、いくつかの要因によって影響を受けます。
- リードアングル： ウォームのリード角は、ギアシステムの機械的利点に影響を与える。リード角が大きいほど、トルク出力が高くなる。
- ワームの直径： 直径の大きいウォームは、ギアとの接触面積が大きくなるため、トルク出力を向上させることができる。
- ギア比： ウォームとギアのギア比によってトルク増幅率が決まります。ギア比が高いほど、トルク出力も高くなります。
- 潤滑： 摩擦を最小限に抑え、効率的なトルク伝達を確保するためには、適切な潤滑が不可欠です。
- 素材と品質： High-quality materials and precision manufacturing contribute to the gearbox’s ability to handle high torque loads.
ウォームギアボックスは、コンパクトな形状で高トルク出力を実現できるため、重機、建設機械、コンベアシステムなど、さまざまな産業用途で広く使用されています。
editor by CX 2024-03-13