产品描述
产品描述
Main Features:
1) Made of high quality aluminum alloy, light weight and non-rusting
2) Large output torque and high radiating efficiency
3) Smooth running and low noise, can work long time in dreadful condition
4) Good-looking appearance, durable service life and small volume
5) Suitable for omnibearing installation
Main Materials:
1)housing:aluminium alloy ADC12(size 571-090); die cast iron HT200(size 110-150);
2)Worm:20Cr, ZI Involute profile; carbonize&quencher heat treatment make gear surface hardness up to 56-62 HRC; After precision grinding, carburization layer’s thickness between 0.3-0.5mm.
3)Worm Wheel:wearable stannum alloy CuSn10-1
Combination Options:
Input:with input shaft, With square flange,With IEC standard input flange
Output:with torque arm, output flange, single output shaft, double output shaft, plastic cover
Worm reducers are available with diffferent combinations: NMRV+NMRV, NMRV+NRV, NMRV+PC, NMRV+UDL, NMRV+MOTORS
详细照片
产品参数
| Old Model | New Model | 比率 | Center Distance | 力量 | Input Dia. | Output Dia. | 输出扭矩 | 重量 |
| RV571 | 7.5~100 | 25mm | 0.06KW~0.12KW | Φ9 | Φ11 | 21N.m | 0.7kgs | |
| RV030 | RW030 | 7.5~100 | 30mm | 0.06KW~0.25KW | Φ9(Φ11) | Φ14 | 45N.m | 1.2kgs |
| RV040 | RW040 | 7.5~100 | 40毫米 | 0.09KW~0.55KW | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84N.m | 2.3kgs |
| RV050 | RW050 | 7.5~100 | 50mm | 0.12KW~1.5KW | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160N.m | 3.5kgs |
| RV063 | RW063 | 7.5~100 | 63mm | 0.18KW~2.2KW | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230N.m | 6.2kgs |
| RV075 | RW075 | 7.5~100 | 75mm | 0.25KW~4.0KW | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410N.m | 9.0kgs |
| RV090 | RW090 | 7.5~100 | 90mm | 0.37KW~4.0KW | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725N.m | 13.0kgs |
| RV110 | RW110 | 7.5~100 | 110mm | 0.55KW~7.5KW | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050N.m | 35.0kgs |
| RV130 | RW130 | 7.5~100 | 130mm | 0.75KW~7.5KW | Φ24(Φ28,Φ38) | Φ45 | 1550N.m | 48.0kgs |
| RV150 | RW150 | 7.5~100 | 150mm | 2.2KW~15KW | Φ28(Φ38,Φ42) | Φ50 | 84.0kgs |
Exploded View:
GMRV Outline Dimension:
| GMRV | 一个 | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | I | M | N | O | P | Q | R | S | T | BL | β | b | t | V |
| 030 | 80 | 97 | 54 | 44 | 14 | 55 | 32 | 56 | 63 | 65 | 29 | 55 | 40 | 57 | 30 | 75 | 44 | 6.5 | 21 | 5.5 | M6*10(n=4) | 0° | 5 | 16.3 | 27 |
| 040 | 100 | 121.5 | 70 | 60 | 18(19) | 60 | 43 | 71 | 78 | 75 | 36.5 | 70 | 50 | 71.5 | 40 | 87 | 55 | 6.5 | 26 | 6.5 | M6*10(n=4) | 45° | 6 | 20.8(21.8) | 35 |
| 050 | 120 | 144 | 80 | 70 | 25(24) | 70 | 49 | 85 | 92 | 85 | 43.5 | 80 | 60 | 84 | 50 | 100 | 64 | 8.5 | 30 | 7 | M8*12(n=4) | 45° | 8 | 28.3(27.3) | 40 |
| 063 | 144 | 174 | 100 | 85 | 25(28) | 80 | 67 | 103 | 112 | 95 | 53 | 95 | 72 | 102 | 63 | 110 | 80 | 8.5 | 36 | 8 | M8*12(n=8) | 45° | 8 | 28.3(31.3) | 50 |
| 075 | 172 | 205 | 120 | 90 | 28(35) | 95 | 72 | 112 | 120 | 115 | 57 | 112.5 | 86 | 119 | 75 | 140 | 93 | 11 | 40 | 10 | M8*14(n=8) | 45° | 8(10) | 31.3(38.3) | 60 |
| 090 | 206 | 238 | 140 | 100 | 35(38) | 110 | 74 | 130 | 140 | 130 | 67 | 129.5 | 103 | 135 | 90 | 160 | 102 | 13 | 45 | 11 | M10*16(n=8) | 45° | 10 | 38.3(41.3) | 70 |
| 110 | 255 | 295 | 170 | 115 | 42 | 130 | – | 144 | 155 | 165 | 74 | 160 | 127.5 | 167.5 | 110 | 200 | 125 | 14 | 50 | 14 | M10*18(n=8) | 45° | 12 | 45.3 | 85 |
| 130 | 293 | 335 | 200 | 120 | 45 | 180 | – | 155 | 170 | 215 | 81 | 179 | 146.5 | 187.5 | 130 | 250 | 140 | 16 | 60 | 15 | M12*20(n=8) | 45° | 14 | 48.8 | 100 |
| 150 | 340 | 400 | 240 | 145 | 50 | 180 | – | 185 | 200 | 215 | 96 | 210 | 170 | 230 | 150 | 250 | 180 | 18 | 72.5 | 18 | M12*22(n=8) | 45° | 14 | 53.8 | 120 |
公司简介
About CHINAMFG Transmission:
We are a professional reducer manufacturer located in HangZhou, ZHangZhoug province.
Our leading products is full range of RV571-150 worm reducers , also supplied GKM hypoid helical gearbox, GRC inline helical gearbox, PC units, UDL Variators and AC Motors, G3 helical gear motor.
Products are widely used for applications such as: foodstuffs, ceramics, packing, chemicals, pharmacy, plastics, paper-making, construction machinery, metallurgic mine, environmental protection engineering, and all kinds of automatic lines, and assembly lines.
With fast delivery, superior after-sales service, advanced producing facility, our products sell well both at home and abroad. We have exported our reducers to Southeast Asia, Eastern Europe and the Middle East and so on.Our aim is to develop and innovate on the basis of high quality, and create a good reputation for reducers.
Workshop:
Exhibitions:
We participate Germany Hannver Exhibition-ZheJiang PTC Fair-Turkey Win Eurasia
包装和运输
Packing information:Plastic Bags+Cartons+Wooden Cases , or on request
安装说明
To install the reducer, it is necessary to note the following issues:
1)Check the correct rotation direction of output shaft before fitting reducer to machines.
2)Before mounting, pls check shaft diameter, bore diameter, key and keyway, to be sure their dimension are not deviation; In order to keep good performance, also pls avoid assembling too tight or too loose.
3)Reducer must be mounted to machines stably to avoid vibration.
4)Whenever possible,protect the reducer against solar radiation and bad weather.
5)In the case of particularly lengthy period of storage(4-6 months), if the oil seal is not immersed in lubricant inside the unit, it is recommended to change it since the rubber could stick to the shaft or may even have lost the elasticity.
6)Painting must definitely not go over rubber parts and the holes on breather plug if any.
7)When connect with hollow or CHINAMFG shaft, pls grease the joint to avoid lock or oxidation.
8)Check the correct lubricant level through indicator if there is one.
9)Starting must take place gradually, without immediately applying the maximum load.
10)When using various of motors to match reducer directly, supporting unit is required if motor is too heavy.
11)Ensure good heat dissipation by keeping good ventilation near the motor fan.
12)In the case of ambient temperature40ºC, pls call the technical department.
After Sales Service
1.Maintenance Time and Warranty:Within 1 year after receiving goods.
2.Other Service: Including modeling selection guide, installation guide, and problem resolution guide, etc.
常问问题
1.Q:Can you make as per customer drawing?
A: Yes, we offer customized service for customers accordingly. We can use customer’s nameplate for gearboxes.
2.Q:What is your terms of payment ?
A: 30% deposit before production,balance T/T before delivery.
3.Q:Are you a trading company or manufacturer?
A:We are a manufacurer with advanced equipment and experienced workers.
4.Q:What’s your production capacity?
A:8000-9000 PCS/MONTH
5.Q:Free sample is available or not?
A:Yes, we can supply free sample if customer agree to pay for the courier cost
6.Q:Do you have any certificate?
A:Yes, we have CE certificate and SGS certificate report.
Contact information:
Ms Lingel Pan
For any questions just feel free ton contact me. Many thanks for your kind attention to our company!
| 应用： | Motor, Machinery, Marine, Agricultural Machinery, Industry |
|---|---|
| 硬度： | 硬化的牙面 |
| 安装： | 横版 |
| 布局： | Right Angle |
| 齿轮形状： | Worm Gear |
| 步： | 双步 |
| 示例： | US$ 15/Piece 1 件（最低订购量） | |
|---|
| 定制化： | 可用的 | 定制请求 |
|---|
蜗轮蜗杆变速箱可以反转运转方向吗？
是的，可以通过改变输入轴或输出轴的方向来改变蜗轮蜗杆传动箱的运转方向。但是，改变蜗轮蜗杆传动箱的运转方向可能会带来一些需要考虑的影响：
- 效率： 改变蜗轮蜗杆传动装置的旋转方向可能会影响其效率。由于蜗杆和蜗轮的设计，蜗轮蜗杆传动装置通常在一个旋转方向上效率更高。
- 反弹： 反转旋转方向可能会导致变速箱齿隙或间隙增大，从而影响精度和运行平稳性。
- 润滑： Depending on the gearbox’s design, reversing the direction could affect lubrication distribution and lead to uneven wear on the gear teeth.
- 加载： Reversing the direction might also impact the gearbox’s load-carrying capacity, especially if it’s designed for predominantly one-way operation.
- 噪声和振动： 由于齿轮啮合方式和啮合行为的变化，方向反转有时会导致噪音和振动增加。
If you need to reverse the direction of a worm gearbox, it’s advisable to consult the gearbox manufacturer’s guidelines and recommendations. They can provide insights into whether the specific gearbox model is suitable for reversible operation and any precautions or adjustments needed to ensure proper functioning.
输送系统中的蜗轮蜗杆减速机：优势与注意事项
蜗轮减速机在输送系统中发挥着至关重要的作用，其有效集成具有诸多优势和需要考虑的因素：
- 空间利用率： 蜗轮减速机结构紧凑，适用于空间有限的应用，例如输送系统。
- 高还原率： 蜗轮减速器可以在单级内实现较高的减速比，从而在不牺牲扭矩的情况下降低输送机的速度。
- 自锁式： 蜗轮减速器具有固有的自锁特性，当电机不主动驱动时，可防止传送带移动。
- 方向控制： 蜗轮减速器便于进行方向控制，使传送带能够根据需要向前或向后移动。
- 低噪音： 与其他类型的齿轮箱相比，蜗轮减速机通常噪音较低，有助于提高输送机的运行噪音。
然而，在输送系统中使用蜗轮减速器时，也需要考虑一些因素：
- 效率： 与其他一些齿轮箱类型相比，蜗轮减速机的机械效率可能较低，从而导致能量损失。
- 产热量： 由于蜗杆和齿轮之间的滑动接触，蜗轮蜗杆变速箱会产生更多热量，因此需要适当的冷却机制。
- 润滑： 适当的润滑对于防止磨损和确保高效运行至关重要。需要定期维护以监测润滑液位。
- 负载和速度： 蜗轮减速器非常适合扭矩大、速度要求中低的应用场合。但它们可能并非高速输送机的最佳选择。
Before integrating a worm gearbox into a conveyor system, it’s important to carefully consider the specific requirements of the application, including load, speed, space constraints, and efficiency needs. Consulting with gearbox experts and manufacturers can help ensure the right choice for the conveyor’s performance and longevity.
蜗轮蜗杆减速器能提供高扭矩输出吗？
是的，蜗轮蜗杆减速器凭借其独特的设计和工作原理，能够提供高扭矩输出。蜗轮蜗杆以其强大的扭矩倍增能力而闻名，使其适用于需要大扭矩传递的应用。
蜗轮蜗杆减速器的扭矩输出受以下几个因素影响：
- 前掠角： 蜗杆的导程角会影响齿轮系统的机械优势。较大的导程角可以产生更高的扭矩输出。
- 蠕虫直径： 直径较大的蜗杆可以提供更大的扭矩输出，因为它与齿轮的接触面积更大。
- 齿轮比： 蜗轮蜗杆与齿轮之间的传动比决定了扭矩放大倍数。传动比越高，扭矩输出越大。
- 润滑： 适当的润滑对于减少摩擦和确保有效的扭矩传递至关重要。
- 材质和质量： High-quality materials and precision manufacturing contribute to the gearbox’s ability to handle high torque loads.
由于蜗轮减速器能够在紧凑的外形尺寸内提供高扭矩输出，因此常用于各种工业应用中，包括重型机械、建筑设备、输送系统等。
editor by CX 2023-10-08