Opis
EP-NMRV075 Heavy Medium-Duty Aluminium Worm Reducer
Ten EP-NMRV075 takes the NMRV aluminium worm reducer series into serious medium-duty territory – delivering up to 233 Nm output torque at input powers up to 3 kW. At 9 kg with 75 mm centre distance, it remains significantly lighter than cast iron equivalents which typically weigh 15-20 kg while handling conveyor head drives, industrial agitator mechanisms, and processing equipment that the smaller NMRV063 cannot cover. The output shaft upgrades to Ø28 mm standard with optional Ø35 mm for heavier shaft loads – matching the shaft standards used in medium-duty Australian industrial drives. IEC motor frames from 56 to 112 connect directly via B5 or B14 flange, accommodating motors from 0.25 kW to 3 kW without adaptor plates. Compatible with PC071 and PC080 helical pre-stages for extended ratio ranges with higher efficiency than equivalent double-worm combinations.
EP-NMRV075 Technical Specifications
| Parametr | Wartość |
|---|---|
| Model | EP-NMRV075 |
| Odległość między środkami | 75 mm |
| Waga (bez silnika) | 9 kg |
| Wał wyjściowy | Ø28 mm h6 (optional Ø35 mm) |
| Wpust wyjściowy | b=8mm, t=31.3mm (38.3 for 35mm) |
| Zakres współczynnika | 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100 |
| Moc wejściowa | 0.25 – 3 kW |
| Mieszkania | Odlew aluminiowy ze stopu aluminium |
| Ramy silników IEC | 56/63/71/80/90/100/112 B5 and B14 |
| Stopień ochrony IP | IP54 |
| Kołnierze wyjściowe | FA, FB |
| Montowanie | B3, B6, B7, B8, V5, V6 |
| Wstępne stopnie śrubowe | PC071, PC080 |
Performance Data at P1 = 0.75 kW (n1 = 1400 rpm)
| Stosunek | n2 (obr./min) | Moment obrotowy (Nm) | Współczynnik usług | Fr2 (N) |
|---|---|---|---|---|
| 15 | 93.3 | 130 | 1.5 | 3509 |
| 20 | 70 | 168 | 1.3 | 3862 |
| 25 | 56 | 205 | 1.0 | 4160 |
| 30 | 46.7 | 233 | 1.0 | 4421 |
| 40 | 35 | 147 | 1.5 | 4865 |
| 50 | 28 | 177 | 1.2 | 5241 |
Performance Data at P1 = 0.55 kW (n1 = 1400 rpm)
| Stosunek | n2 (obr./min) | Moment obrotowy (Nm) | Współczynnik usług | Fr2 (N) |
|---|---|---|---|---|
| 40 | 35 | 108 | 2.0 | 4865 |
| 50 | 28 | 129 | 1.6 | 5241 |
| 60 | 23.3 | 146 | 1.4 | 5569 |
| 80 | 17.5 | 180 | 1.1 | 6130 |
| 100 | 14 | 206 | 0.9 | 6603 |
Helical Pre-Stage Combinations
| Połączenie | Zakres współczynnika | Maksymalny moment obrotowy |
|---|---|---|
| PC071+NMRV075 | 73.4 – 293.8:1 | 332 Nm |
| PC080+NMRV075 | 75 – 150:1 | 332 Nm |
| NMRV040/075 | 2400 – 5000:1 | 498 Nm |
✓ Główne funkcje i korzyści
Handles loaded conveyor drives, industrial agitators, and processing equipment that smaller NMRV frames cannot. The first NMRV size operating at genuine medium-industrial torque levels.
Accepts motors from 0.25 kW to 3 kW directly via B5 or B14 flange. Frame 100 and 112 support opens the NMRV075 to medium-industrial applications previously requiring cast iron reducers.
45-55% lighter than comparable cast iron. Still practical for field installation by one or two workers on mining and construction sites without overhead lifting equipment.
PC071 and PC080 helical pre-stages extend the ratio range to 293.8:1 – achieving higher transmission efficiency than double-worm combinations at comparable ratios. Standard for demanding continuous-duty applications.
⚙ Zastosowania przemysłowe
Head and tail drives for medium-duty ore, coal, and aggregate belt conveyors. 233 Nm handles loaded belt tension at moderate speeds. 9 kg enables underground installation without overhead crane.
Mixing vessel drives for chemical processing, water treatment, and food production. Ø28 or Ø35 output shaft matches standard agitator shaft couplings directly.
Palletiser main drives, heavy-duty indexing tables, and robotic cell conveyor drives exceeding NMRV063 torque capacity. FA and FB flanges for direct machine mounting.
Low-speed drives for dosing pumps, small compressors, and ventilation blower mechanisms requiring up to 3 kW input power.
⚙ Przewodnik wyboru i pozycje montażowe
Select the NMRV075 when your application requires output torque between 130 Nm and 233 Nm at input power up to 3 kW. Step up to the NMRV090 at 302 Nm for heavier loads. The NMRV063 at 167 Nm is more cost-effective for lighter applications or where 5 output flange options are needed.
| Pozycja | Kod | Notatka o oleju |
|---|---|---|
| Poziomy | B3 | Wypełnienie standardowe |
| Odwrotny | B8 | Zwiększone wypełnienie |
| Pionowo w górę | Wersja 5 | Zmniejszone wypełnienie |
| Pionowo w dół | Wersja 6 | Maksymalne wypełnienie |
| Montaż ścienny L/R | B6/B7 | Zgodnie z tabelą montażową |
⚖ Aluminium vs Cast Iron – Heavy-Duty Comparison
At the 75 mm size class, the weight difference between aluminium and cast iron becomes increasingly significant for installation logistics. The NMRV075 at 9 kg can be handled by one or two workers; the cast iron equivalent at 15-20 kg may require mechanical lifting assistance.
| Funkcja | Aluminium NMRV | Lane żelazo |
|---|---|---|
| Waga | Zapalniczka 30-50% | Cięższy |
| Korozja | Doskonały | Słaby |
| Rozpraszanie ciepła | Znakomity | Umiarkowany |
| Koszt | Niżej | Wyższy |
| Hałas | Niski | Umiarkowany |
| Silnik IEC | Bezpośredni B5/B14 | Często potrzebny jest adapter |
❓ Najczęściej zadawane pytania
▶ What is the maximum output torque of the EP-NMRV075?
▶ Why does the NMRV075 support IEC frame 100 and 112?
▶ What are the PC071 and PC080 helical pre-stage options?
▶ When should I specify the Ø35 mm output shaft?
▶ What is the thermal capacity of the EP-NMRV075 at 3 kW?
★ Opinie klientów
“NMRV075 on our underground conveyor drives. 9 kg means our crew installs without a crane. Running 3 shifts at 200 Nm continuous with zero downtime in 14 months.”
Phil W. – Goldfields Mining Co. (Australia)
“Upgraded our agitator drives from cast iron. NMRV075 at 35 mm output matches our mixing shaft directly. 50% lighter – simplified our vessel mounting frames significantly.”
Martin K. – ChemProcess AG (Germany)
“PC080 pre-stage plus NMRV075 on our palletiser main drives. 150:1 ratio with better efficiency than our previous double-worm setup. Clean compact installation.”
David L. – TransPack Ltd (United Kingdom)
⚙ Powiązane produkty i akcesoria
⚙ Silniki IEC: Frames 56-112, B5 and B14. ⚖ Kołnierze wyjściowe: FA, FB. ⚖ Ramiona momentu obrotowego: K1=200mm. ⚙ Obejmuje: N2=74mm. ⚙ Etapy wstępne: PC071, PC080 helical units.
Get Your EP-NMRV075 Quote Today
Contact Ever Power for pricing and OEM quantities. Email: [email protected]
